Land Use Planning ↔ relates to ↔ Interior Design Architecture

niversity comprises ten undergraduate, graduate, and professional schools. It enrolls approximately 12,000 students across its campuses, with 11,000 on the Moscow campus. The university is classified among "R1: Very High Spending and Doctorate Production". Located on the rural Palouse, the university is represented in intercollegiate athletics by the Idaho Vandals, who compete in NCAA Division I, primarily in the Big Sky Conference.

Under the elms Rare Camperdown elms line the walkway between the Music building, Nichols Building (home to Family and Consumer Sciences) and Administration Building. These "upside-down" trees have been on campus for over 80 years and are among few of their kind in the Northwest. The weeping branches and knotty trunk are formed by being grafted upwards. Steam plant Built in 1926, the steam plant provides heat to U of I buildings from a single location. Originally designed to burn coal, then oil, then natural gas, the plant was modified in 1986 to burn waste wood chips left over from local sawmills. The use of wood has significantly reduced the emissions of the plant, as well as cut costs to heat the campus. The plant is shut down twice a year for cleaning and maintenance.

College of Agricultural and Life Sciences (CALS, renamed 2001, formerly Agriculture (1901)) College of Art and Architecture (1981) College of Business and Economics (CBE, 1925) College of Education, Health and Human Sciences (EHH S,1920) College of Engineering (1911) College of Graduate Studies (COGS) College of Law (1909) College of Letters, Arts, and Social Sciences (CLASS, 2002, formed after split of Letters and Science (1900)) College of Natural Resources (CNR, renamed 2000, formerly Forestry, Wildlife, & Range Sciences, originally Forestry (1917)) College of Science (2002, formed after split of Letters and Science, and dissolution of Mines and Earth Resources) School of Health and Medical Professions (SHAMP, 2024) In July 2002, the College of Letters & Science was split into two separate colleges: the College of Science and the College of Letters, Arts, and Social Sciences (CLASS). Concurrently, the College of Mines and Earth Resources was discontinued; its programs were split between the College of Engineering and the new College of Science. The College of Law opened a second campus in Boise in 2010. Initially, the Boise campus only offered third-year classes. It expanded to offer second-year classes in 2014, and as of 2017–18, law students can take their entire three-year curriculum at either location. For the 2024–2025 academic year, the middle 50% of enrolled students scored between 1030 and 1330 on the SAT (with a 50th percentile of 1180), between 510 and 670 on the SAT Evidence-Based Reading and Writing section (50th percentile: 590), and between 520 and 660 on the SAT Math section (50th percentile: 590). Reputation and rankings U.S. News & World Report ranks U of I tied for 89th among the nation's best public universities and tied for 179th among the best national universities in its 2020 report. In 2024, Washington Monthly ranked U of I 83rd among 438 national universities in the U.S. based on U of I's contribution to the public good, as measured by social mobility, research, and promoting public service. In 2025, the Carnegie Classification listed University of Idaho among "R1 Doctoral Universities – Very high research spending and doctorate production", among with other 186 universities. The University of Idaho is included in the 2021 edition of Princeton Review's "Best 386 Colleges." The Princeton Review also ranks U-Idaho as one of the nation's top 286 environmentally responsible colleges. The university was named by the Corporation for National and Community Service to the 2010 President's Higher Education Community Service Honor Roll for exemplary service efforts—more than 3,800 students volunteered more than 150,000 hours to community and service-learning.

ches of the Rocky Mountains. The United States Forest Service holds about 38% of Idaho's land, the highest proportion of any state. Industries significant for the state economy include manufacturing, agriculture, mining, forestry, science and technology, and tourism. Idaho has been a predominantly Republican state since statehood, with the Republican Party dominating in both state and national elections; abortion is severely restricted and the state retains the death penalty, including methods like the firing squad. The state contains the Idaho National Laboratory. Idaho's agricultural sector supplies many products, but the state is best known for its potato crop, which comprises around one-third of the nationwide yield.

In 2025, the gross state product (state GDP) for Idaho was $135.5 billion and the state's per capita personal income was $64,846. Idaho had the 39th highest GDP per capita in the United States of America in 2025. In 2025, small businesses made up 99.2% and employed 56.0% of the state's work force. As of May 2025, the state's unemployment rate was 3.6%. Total employment in Idaho in 2024 was 965,824. Idaho is the top potato producing state in the United States and almost one-third of the nation's potatoes are grown in the Snake River Plain, a belt of low-lying land that extends across southern Idaho. Important industries in Idaho are food processing, lumber and wood products, machinery, chemical products, paper products, electronics manufacturing, silver and other mining, and tourism. The world's largest factory for barrel cheese, the raw product for processed cheese, is in Gooding, Idaho. It has a capacity of 120,000 metric tons per year of barrel cheese and belongs to the Glanbia group. As Idaho neared statehood, mining and other extractive industries played a significant role in its economy. Although the state's reliance on mining has diminished over time, Idaho remains renowned as "The Gem State" due to its production of seventy-two varieties of precious and semi-precious stones. Idaho is a leading national producer of potatoes, trout, Austrian winter peas, and lentils. The state's primary industries include manufacturing, agriculture, food processing, timber, and mining. Tourism is another way that Idaho capitalizes on its natural resources.

ce of British Columbia. Idaho's state capital and largest city is Boise. With an area of 83,569 square miles (216,440 km2), Idaho is the 14th-largest state by land area. The state has a population of approximately two million people; it ranks as the 13th-least populous and the seventh-least densely populated of the 50 U.S. states. For thousands of years, and prior to European colonization, Idaho had been inhabited by natives. In the early 19th century, Idaho was considered part of the Oregon Country, an area which was disputed between the U.S. and the British Empire. Idaho officially became a U.S. territory with the signing of the Oregon Treaty of 1846, but a separate Idaho Territory was not organized until 1863, instead being included for periods in Oregon Territory and Washington Territory. The state was eventually admitted to the Union on July 3, 1890, becoming the 43rd state. Forming part of the Pacific Northwest (and the associated Cascadia bioregion), Idaho is divided into several distinct geographic and climatic regions. The state's north, the relatively isolated Idaho Panhandle, is closely linked with Eastern Washington, with which it shares the Pacific Time Zone—the rest of the state uses the Mountain Time Zone. The state's south includes the Snake River Plain (which has most of the population and agricultural land), and the southeast incorporates part of the Great Basin. Idaho is quite mountainous and contains several stretches of the Rocky Mountains. The United States Forest Service holds about 38% of Idaho's land, the highest proportion of any state. Industries significant for the state economy include manufacturing, agriculture, mining, forestry, science and technology, and tourism. Idaho has been a predominantly Republican state since statehood, with the Republican Party dominating in both state and national elections; abortion is severely restricted and the state retains the death penalty, including methods like the firing squad. The state contains the Idaho National Laboratory. Idaho's agricultural sector supplies many products, but the state is best known for its potato crop, which comprises around one-third of the nationwide yield.

and institutional organizations. The uncounted plural, geographic information systems, also abbreviated GIS, is the most common term for the industry and profession concerned with these systems. The academic discipline that studies these systems and their underlying geographic principles, may also be abbreviated as GIS, but the unambiguous GIScience is more common. GIScience is often considered a subdiscipline of geography within the branch of technical geography. Geographic information systems are used in multiple technologies, processes, techniques and methods. They are attached to various operations and numerous applications, that relate to: engineering, planning, management, transport/logistics, insurance, telecommunications, and business, as well as the natural sciences such as forestry, ecology, and Earth science. For this reason, GIS and location intelligence applications are at the foundation of location-enabled services, which rely on geographic analysis and visualization. GIS provides the ability to relate previously unrelated information, through the use of location as the "key index variable". Locations and extents that are found in the Earth's spacetime are able to be recorded through the date and time of occurrence, along with x, y, and z coordinates; representing, longitude (x), latitude (y), and elevation (z). All Earth-based, spatial–temporal, location and extent references should be relatable to one another, and ultimately, to a "real" physical location or extent.

Geological exploration and mineral resource assessment. In geology, GIS is increasingly used for the assessment and forecasting of mineral deposits, particularly for commonly occurring mineral resources (COMR) such as construction sands, clays, and peat. Unlike the dense and uniformly distributed borehole data typical of oil and gas exploration, COMR exploration often relies on sparse and unevenly distributed datasets. This requires specialized GIS algorithms, for instance, those based on Voronoi diagrams, to create three-dimensional geological models from incomplete information. Beyond modeling, GIS enables a comprehensive evaluation by integrating geological and industrial parameters—such as overburden ratio and deposit thickness—with land-use data to classify and rank potential mining sites based on their economic and environmental acceptability. A case study of this integrated approach was demonstrated for the Brest region in Belarus, where a regional digital model was created to forecast and evaluate new non-metallic mineral deposits, considering both geological constraints and land-use regulations for open-pit mining development. Geospatial intelligence History The use of digital maps generated by GIS has also influenced the development of an academic field known as spatial humanities. Hydrology Participatory GIS Public health Traditional knowledge GIS Other aspects Open Geospatial Consortium standards The Open Geospatial Consortium (OGC) is an international industry consortium of 384 companies, government agencies, universities, and individuals participating in a consensus process to develop publicly available geoprocessing specifications. Open interfaces and protocols defined by OpenGIS Specifications support interoperable solutions that "geo-enable" the Web, wireless and location-based services, and mainstream IT, and empower technology developers to make complex spatial information and services accessible and useful with all kinds of applications.

natural sciences such as forestry, ecology, and Earth science. For this reason, GIS and location intelligence applications are at the foundation of location-enabled services, which rely on geographic analysis and visualization. GIS provides the ability to relate previously unrelated information, through the use of location as the "key index variable". Locations and extents that are found in the Earth's spacetime are able to be recorded through the date and time of occurrence, along with x, y, and z coordinates; representing, longitude (x), latitude (y), and elevation (z). All Earth-based, spatial–temporal, location and extent references should be relatable to one another, and ultimately, to a "real" physical location or extent.

Mixed-use zoning combines residential, commercial, office, and public uses into a single space. Mixed-use zoning can be vertical, within a single building, or horizontal, involving multiple buildings. Planning and community activist Jane Jacobs wrote extensively on the connections between the separation of uses and the failure of urban renewal projects in New York City. She advocated dense mixed-use developments and walkable streets. In contrast to villages and towns, in which many residents know one another, and low-density outer suburbs that attract few visitors, cities and inner city areas have the problem of maintaining order between strangers. This order is maintained when, throughout the day and evening, there are sufficient people present with eyes on the street. This can be accomplished in successful urban districts that have a great diversity of uses, creating interest and attracting visitors. Jacobs' writings, along with increasing concerns about urban sprawl, are often credited with inspiring the New Urbanism movement. To accommodate the New Urbanist vision of walkable communities combining cafés, restaurants, offices and residential development in a single area, mixed-use zones have been created within some zoning systems. These still use the basic regulatory mechanisms of zoning, excluding incompatible uses such as heavy industry or sewage farms, while allowing compatible uses such as residential, commercial and retail activities so that people can live, work and socialise within a compact geographic area. The mixing of land uses is common throughout the world.

Inclusionary zoning refers to policies to increase the number of housing units within a development that are affordable to low and middle-income households. These policies can be mandatory as part of performance zoning or based on voluntary incentives, such as allowing greater density of development. Overlay zoning An overlay zone is a zoning district that overlaps one or more zoning districts to address a particular concern or feature of that area, such as wetlands, historic buildings or transit-oriented development. Overlay zoning has the advantage of providing targeted regulation to address a specific issue, such as a natural hazard, without having to significantly rewrite an existing zoning ordinance.

The United Kingdom does not use zoning as a technique for controlling land use. British land use control began its modern phase after the Town and Country Planning Act of 1947. Rather than dividing municipal maps into land use zones, English planning law places all development under the control of local and regional governments, effectively abolishing the ability to develop land by-right. However, existing development allows land use by-right as long as the use does not constitute a change in the type of land use. A property owner must apply to change land use type of any existing building, and such changes must be consistent with the local and regional land use plans. Development control or planning control is the element of the United Kingdom's system of town and country planning through which local government regulates land use and new building. There are 421 Local Planning Authorities (LPAs) in the United Kingdom. Generally they are the local borough or district council or a unitary authority. They each use a discretionary "plan-led system" whereby development plans are formed and the public consulted. Subsequent development requires planning permission, which will be granted or refused with reference to the development plan as a material consideration. The plan does not provide specific guidance on what type of buildings will be allowed in a given location, rather it provides general principles for development and goals for the management of urban change. Because planning committees (made up of directly elected local councillors) or in some cases planning officers themselves (via delegated decisions) have discretion on each application for development or change of use made, the system is considered a 'discretionary' one. Planning applications can differ greatly in scale, from airports and new towns to minor modifications to individual houses. In order to prevent local authorities from being overwhelmed by high volumes of small-scale applications from individual householders, a separate system of permitted development has been introduced. Permitted development rules are largely form-based, but in the absence of zoning, are applied at the national level. Examples include allowing a two-storey extension up to three metres at the rear of a property, extensions up to 50% of the original width at each side, and certain types of outbuildings in the garden, provided that no more than 50% of the land area is built over. These are appropriately sized for a typical three bedroom semi-detached property, but must be applied across a wide variety of housing types, from small terraces, to larger detached properties and manor houses. In August 2020, the UK Government published a consultation document called Planning for the Future. The proposals hinted at a move toward zoning in England, with areas given a Growth, Renewal or Protected designation, with the possibility of "sub-areas within each category", although the document did not elaborate on what the details of these might have been.

ent product or (market-specific) service, and the products combine to satisfy a common need. It contrasts with horizontal integration, wherein a company produces several items that are related to one another. Vertical integration has also described management styles that bring large portions of the supply chain not only under a common ownership but also into one corporation (as in the 1920s when the Ford River Rouge complex began making much of its own steel rather than buying it from suppliers). Vertical integration can be desirable because it secures supplies needed by the firm to produce its product and the market needed to sell the product, but it can become undesirable when a firm's actions become anti-competitive and impede free competition in an open marketplace. Vertical integration is one method of avoiding the hold-up problem.

There are many problems and benefits that vertical integration brings to an economic system. Problems that can stem from vertical integration can include large capital investments needed to set up and buy factories and maintain efficient profits. Rapid technology development can increase integration difficulties and further increase costs. The requirement of different business skills venturing into new portions of the supply chain can be challenging for the firm. Another problem that may stem from vertical integration is the collapse of goals among the various firms in a supply chain. With each firm operating under different systems, integration may cause initial problems in management and production. Vertical integration also proves to be dangerous when monopolistic problems arise in a capitalistic economy. When this happens, competition is removed and a corporation has the power to control all firms in its supply chain. Large companies are more likely than smaller companies to employ vertical integration, as they have more resources to manage each stage of production (e.g. major expansion and funding). Vertical integration allows control of production from beginning to end. Vertical integration requires a company to focus not only on its core business, but also on several difficult areas such as sourcing materials and manufacturing partners, distribution, and finally selling the product. One benefit is that the implementation of vertical integration can yield increased profit margins or eliminate the leverage that other firms or buyers may have over the firm. It allows improved coordination between production and distribution firms and decreases the cost of exchange of goods between firms within a supply chain. Operational routines also become more consistent and certain as the management of these firms gradually merge. Vertically integrated firms rarely need to worry about the sufficiency in their supply of materials because they generally control the facilities that provide them. A vertically integrated company also creates high barriers of entry into their respective economy, eliminating most potential competition. Implementing vertical integration can be beneficial in that it reduces the distance that separates the suppliers and customers from the resources or information, which can then boost profits and efficiency. There are internal and external society-wide gains and losses stemming from vertical integration, which vary according to the state of technology in the industries involved, roughly corresponding to the stages of the industry lifecycle. Static technology represents the simplest case, where the gains and losses have been studied extensively.

In microeconomics, management and international political economy, vertical integration, also referred to as vertical consolidation, is an arrangement in which the supply chain of a company is integrated and owned by that company. Usually each member of the supply chain produces a different product or (market-specific) service, and the products combine to satisfy a common need. It contrasts with horizontal integration, wherein a company produces several items that are related to one another. Vertical integration has also described management styles that bring large portions of the supply chain not only under a common ownership but also into one corporation (as in the 1920s when the Ford River Rouge complex began making much of its own steel rather than buying it from suppliers). Vertical integration can be desirable because it secures supplies needed by the firm to produce its product and the market needed to sell the product, but it can become undesirable when a firm's actions become anti-competitive and impede free competition in an open marketplace. Vertical integration is one method of avoiding the hold-up problem.

l structures such as roads, railways, bridges, airports, public transit systems, tunnels, water supply, sewers, electrical grids, and telecommunications (including Internet connectivity and broadband access). In general, infrastructure has been defined as "the physical components of interrelated systems providing commodities and services essential to enable, sustain, or enhance societal living conditions" and maintain the surrounding environment. Especially in light of the massive societal transformations needed to mitigate and adapt to climate change, contemporary infrastructure conversations frequently focus on sustainable development and green infrastructure. Acknowledging this importance, the international community has created policy focused on sustainable infrastructure through the Sustainable Development Goals, especially Sustainable Development Goal 8 "Industry, Innovation and Infrastructure". One way to describe different types of infrastructure is to classify them as two distinct kinds: hard infrastructure and soft infrastructure. Hard infrastructure is the physical plant and networks necessary for the functioning of a modern industrial society or industry. This includes utilities, waste management, transport facilities, and telecom networks. Soft infrastructure is all the institutions that maintain the economic, health, social, environmental, and cultural standards of a place.

Sustainable energy Sustainable energy infrastructure includes types of renewable energy power plants as well as the means of exchange from the plant to the homes and businesses that use that energy. Renewable energy includes well researched and widely implemented methods such as wind, solar, and hydraulic power, as well as newer and less commonly used types of power creation such as fusion energy. Sustainable energy infrastructure must maintain a strong supply relative to demand, and must also maintain sufficiently low prices for consumers so as not to decrease demand. Any type of renewable energy infrastructure that fails to meet these consumption and price requirements will ultimately be forced out of the market by prevailing non renewable energy sources. Sustainable water Sustainable water infrastructure is focused on a community's sufficient access to clean, safe drinking water. Water is a public good along with electricity, which means that sustainable water catchment and distribution systems must remain affordable to all members of a population. "Sustainable Water" may refer to a nation or community's ability to be self-sustainable, with enough water to meet multiple needs including agriculture, industry, sanitation, and drinking water. It can also refer to the holistic and effective management of water resources.

Masdar City is a proposed zero emission smart city that will be contracted in the United Arab Emirates. Some individuals have referred to this planned settlement as "utopia-like", due to the fact that it will feature multiple sustainable infrastructure elements, including energy, water, waste management, and transportation. Masdar City will have a power infrastructure containing renewable energy methods including solar energy. Masdar City is located in a desert region, meaning that sustainable collection and distribution of water is dependent on the city's ability to use water at innovative stages of the water cycle. The city will use groundwater, greywater, seawater, blackwater, and other water resources to obtain both drinking and landscaping water. Initially, Masdar City will be waste-free. Recycling and other waste management and waste reduction methods will be encouraged. Additionally, the city will implement a system to convert waste into fertilizer, which will decrease the amount of space needed for waste accumulation as well as provide an environmentally friendly alternative to traditional fertilizer production methods. No cars will be allowed in Masdar City, contributing to low carbon emissions within the city boundaries. Instead, alternative transportation options will be prioritized during infrastructure development. This means that a bike lane network will be accessible and comprehensive, and other options will also be available. See also References Bibliography Koh, Jae Myong (2018) Green Infrastructure Financing: Institutional Investors, PPPs and Bankable Projects, London: Palgrave Macmillan. ISBN 978-3-319-71769-2. Nurre, Sarah G.; Cavdaroglu, Burak; Mitchell, John E.; Sharkey, Thomas C.; Wallace, William A. (December 2012). "Restoring infrastructure systems: An integrated network design and scheduling (INDS) problem". European Journal of Operational Research. 223 (3): 794–806. doi:10.1016/j.ejor.2012.07.010. Ascher, Kate (2007). The works: anatomy of a city. Researched by Wendy Marech (Reprint ed.). New York: Penguin Press. ISBN 978-0-14-311270-9. Larry W. Beeferman, "Pension Fund Investment in Infrastructure: A Resource Paper", Capital Matter (Occasional Paper Series), No. 3 December 2008 A. Eberhard, "Infrastructure Regulation in Developing Countries", PPIAF Working Paper No. 4 (2007) World Bank M. Nicolas J. Firzli and Vincent Bazi, "Infrastructure Investments in an Age of Austerity: The Pension and Sovereign Funds Perspective", published jointly in Revue Analyse Financière, Q4 2011 issue, pp. 34–37 and USAK/JTW July 30, 2011 (online edition) Hayes, Brian (2005). Infrastructure: the book of everything for the industrial landscape (1st ed.). New York: Norton. ISBN 978-0-393-32959-9. Huler, Scott (2010). On the grid: a plot of land, an average neighborhood, and the systems that make our world work. Emmaus, PA: Rodale. ISBN 978-1-60529-647-0. Georg Inderst, "Pension Fund Investment in Infrastructure", OECD Working Papers on Insurance and Private Pensions, No. 32 (2009) Dalakoglou, Dimitris (2017). The Road: An Ethnography of (Im)mobility, space and cross-border infrastructures.

Stormwater, also written storm water, is water that originates from precipitation (storm), including heavy rain and meltwater from hail and snow. Stormwater can soak into the soil (infiltrate) and become groundwater, be stored on depressed land surface in ponds and puddles, evaporate back into the atmosphere, or contribute to surface runoff. Most runoff is conveyed directly as surface water to nearby streams, rivers or other large water bodies (wetlands, lakes and oceans) without treatment. In natural landscapes, such as forests, soil absorbs much of the stormwater. Plants also reduce stormwater by improving infiltration, intercepting precipitation as it falls, and by taking up water through their roots. In developed environments, such as cities, unmanaged stormwater can create two major issues: one related to the volume and timing of runoff (flooding) and the other related to potential contaminants the water is carrying (water pollution). In addition to the pollutants carried in stormwater runoff, urban runoff is being recognized as a cause of pollution in its own right. Stormwater is also an important resource as human population and demand for water grow, particularly in arid and drought-prone climates.

Stormwater creation of sinkhole collapses An example of urban stormwater creating a sinkhole collapse is the February 25, 2002 Dishman Lane collapse in Bowling Green, Kentucky where a sinkhole suddenly dropped the road under four traveling vehicles. The nine-month repair of the Dishman Lane collapse cost a million dollars but there remains the potential for future problems. In undisturbed areas with natural subsurface (karst) drainage, soil and rock fragments choke karst openings, thereby being a self-limitation to the growth of openings. The undisturbed karst drainage system becomes balanced with the climate so it can drain the water produced by most storms. However, problems occur when the landscape is altered by urban development. In urban areas with natural subsurface karst drainage there are no surface streams for the increased stormwater from impervious surfaces such as roofs, parking lots, and streets to receive drainage. Instead, the stormwater enters the subsurface drainage system by moving down through the ground. When the subsurface water flow becomes great enough to transport soil and rock fragments, the karst openings grow rapidly. Where karst openings are roofed by supportive (competent) limestone, there frequently is no surface warning that an opening has grown so large it will suddenly collapse catastrophically. It is recommended that land-use planning agencies avoid karst areas when considering new development projects.

nd surface in ponds and puddles, evaporate back into the atmosphere, or contribute to surface runoff. Most runoff is conveyed directly as surface water to nearby streams, rivers or other large water bodies (wetlands, lakes and oceans) without treatment. In natural landscapes, such as forests, soil absorbs much of the stormwater. Plants also reduce stormwater by improving infiltration, intercepting precipitation as it falls, and by taking up water through their roots. In developed environments, such as cities, unmanaged stormwater can create two major issues: one related to the volume and timing of runoff (flooding) and the other related to potential contaminants the water is carrying (water pollution). In addition to the pollutants carried in stormwater runoff, urban runoff is being recognized as a cause of pollution in its own right. Stormwater is also an important resource as human population and demand for water grow, particularly in arid and drought-prone climates.

duce desired outcomes. The scope of the profession is broad and can be subdivided into several sub-categories including professional or licensed landscape architects who are regulated by governmental agencies and possess the expertise to design a wide range of structures and landforms for human use; landscape design which is not a licensed profession; site planning; stormwater management; erosion control; environmental restoration; public realm, parks, recreation and urban planning; visual resource management; green infrastructure planning and provision; and private estate and residence landscape master planning and design; all at varying scales of design, planning and management.

e design of other interventions that will produce desired outcomes. The scope of the profession is broad and can be subdivided into several sub-categories including professional or licensed landscape architects who are regulated by governmental agencies and possess the expertise to design a wide range of structures and landforms for human use; landscape design which is not a licensed profession; site planning; stormwater management; erosion control; environmental restoration; public realm, parks, recreation and urban planning; visual resource management; green infrastructure planning and provision; and private estate and residence landscape master planning and design; all at varying scales of design, planning and management.

Modern landscape architecture is a multi-disciplinary field, incorporating aspects of urban design, architecture, geography, ecology, civil engineering, structural engineering, horticulture, environmental psychology, industrial design, soil sciences, botany, and fine arts. The activities of a landscape architect can range from the creation of public parks and parkways to site planning for campuses and corporate office parks; from the design of residential estates to the design of civil infrastructure; and from the management of large wilderness areas to reclamation of degraded landscapes such as mines or landfills. Landscape architects work on structures and external spaces in the landscape aspect of the design – large or small, urban, suburban and rural, and with "hard" (built) and "soft" (planted) materials, while integrating ecological sustainability. The most valuable contribution can be made at the first stage of a project to generate ideas with technical understanding and creative flair for the design, organization, and use of spaces. The landscape architect can conceive the overall concept and prepare the master plan, from which detailed design drawings and technical specifications are prepared. They can also review proposals to authorize and supervise contracts for the construction work. Other skills include preparing design impact assessments, conducting environmental assessments and audits, and serving as an expert witness at inquiries on land use issues.

The American Planning Association states that the goal of land use planning is to further the welfare of people and their communities by creating convenient, equitable, healthful, efficient, and attractive environments for present and future generations.

able legislation applicable in Scotland and Northern Ireland. History Land use planning nearly always requires land use regulation, which typically encompasses zoning. Zoning regulates the types of activities that can be accommodated on a given piece of land, as well as the amount of space devoted to those activities, and the ways that buildings may be situated and shaped. The ambiguous nature of the term "planning", as it relates to land use, is historically tied to the practice of zoning. Zoning in the United States came about in the late 19th and early 20th centuries to protect the interests of property owners. The practice was found to be constitutionally sound by the Supreme Court decision of Village of Euclid v. Ambler Realty Co. in 1926. Soon after, the model law known as the Standard State Zoning Enabling Act was enacted by many state legislatures, which gave authority to the states and its subdivisions to regulate land use. Even so, the practice remains controversial today, particularly in its impact on economic and racial segregation, as some critics argue that zoning has often been used to exclude certain populations from particular neighborhoods. The "taking clause" of the Fifth Amendment to the United States Constitution prohibits the government from taking private property for public use without just compensation. The case of Dolan v. City of Tigard demonstrated the criteria that determine the threshold of what is considered taking. One interpretation of the taking clause is that any restriction on the development potential of land through zoning regulation is a "taking". A deep-rooted anti-zoning sentiment exists in America, that no one has the right to tell another what he can or cannot do with his land. Ironically, although people are often averse to being told how to develop their own land, they tend to expect the government to intervene when a proposed land use is undesirable. Conventional zoning has not typically regarded the manner in which buildings relate to one another or the public spaces around them, but rather has provided a pragmatic system for mapping jurisdictions according to permitted land use. This system, combined with the interstate highway system, widespread availability of mortgage loans, growth in the automobile industry, and the over-all post-World War II economic expansion, destroyed most of the character that gave distinctiveness to American cities. The urban sprawl that most US cities began to experience in the mid-twentieth century was, in part, created by a flat approach to land use regulations. Zoning without planning created unnecessarily exclusive zones. Thoughtless mapping of these zones over large areas was a big part of the recipe for suburban sprawl.

As America grew and urban sprawl was rampant, the much-loved America of the older towns, cities, or streetcar suburbs essentially became illegal through zoning. Unparalleled growth and unregulated development changed the look and feel of landscapes and communities. They strained commercial corridors and affected housing prices, causing citizens to fear a decline in the social, economic and environmental attributes that defined their quality of life. Zoning regulations became politically contentious as developers, legislators, and citizens struggled over altering zoning maps in a way that was acceptable to all parties. Land use planning practices evolved as an attempt to overcome these challenges.

actures computer memory and computer data storage products, including dynamic random-access memory (DRAM), flash memory, High Bandwidth Memory (HBM), and solid-state drives (SSDs). Founded in 1978 in Boise, Idaho, Micron is the only major American computer memory manufacturer. It is one of the "Big Three" computer memory manufacturers, along with the South Korean companies Samsung Electronics and SK Hynix. Micron marketed its consumer products under the brand Crucial, with the sub-brand Ballistix being used to denote products targeting gaming computers, until its disestablishment on 2026. Micron and Intel together created IM Flash Technologies, which produced NAND flash memory. It owned Lexar between 2006 and 2017. Sanjay Mehrotra has served as president and CEO of Micron since 2017. On May 26, 2026, Micron became the latest U.S.

n since 2017. On May 26, 2026, Micron became the latest U.S. company to reach a US$1 trillion market capitalization, amid surging demand for its HBM chips. History 1978–1999 Micron was founded in Boise, Idaho, in 1978 by Ward Parkinson, Joe Parkinson, Dennis Wilson, and Doug Pitman as a semiconductor design consulting company. Startup funding was provided by local Idaho businessmen Tom Nicholson, Allen Noble, Rudolph Nelson, and Ron Yanke. Later it received funding from Idaho billionaire J. R. Simplot, whose fortune was made in the potato business. In 1981, the company moved from consulting to manufacturing with the completion of its first wafer fabrication unit ("Fab 1"), producing 64K DRAM chips. In 1984, the company had its initial public offering. Micron sought to enter the market for RISC processors in 1991 with a product known as FRISC, targeting embedded control and signal processing applications. Running at 80 MHz and described as "a 64-bit processor with fast context-switching time and high floating-point performance", the design supported various features for timely interrupt handling and featured an arithmetic unit capable of handling both integer and floating-point calculations with a claimed throughput of 80 MFLOPS for double-precision arithmetic. Micron aimed to provide a "board-level demonstration supercomputer" in configurations with 256 MB or 1 GB of RAM. Having set up a subsidiary and with the product being designed into graphics cards and accelerators, Micron concluded in 1992 that the effort would not deliver the "best bang for the buck", reassigning engineers to other projects and discontinuing the endeavour. In 1994, founder Joe Parkinson retired as CEO and Steve Appleton took over as Chairman, President, and CEO. A 1996 3-way merger among ZEOS International, Micron Computer, and Micron Custom Manufacturing Services (MCMS) increased the size and scope of the company; this was followed rapidly with the 1997 acquisition of NetFrame Systems, in a bid to enter the mid-range server industry.

Since 2000 In 2000, Gurtej Singh Sandhu and Trung T. Doan at Micron initiated the development of atomic layer deposition high-k films for DRAM memory devices. This helped drive cost-effective implementation of semiconductor memory, starting with 90 nm node DRAM. Pitch double-patterning was also pioneered by Gurtej Singh Sandhu at Micron during the 2000s, leading to the development of 30-nm class NAND flash memory, and it has since been widely adopted by NAND flash and RAM manufacturers worldwide. In 2002, Micron spun off its personal computer business as MPC Corporation and put it up for sale. The company found the business difficult as the number 12 American computer maker with only 1.3 percent of the market. Micron and Intel created a joint venture in 2005, based in IM Flash Technologies in Lehi, Utah. The two companies formed another joint venture in 2011, IM Flash Singapore, in Singapore. In 2012 Micron became sole owner of this second joint venture. In 2006 Micron acquired Lexar, an American manufacturer of digital media products. The company changed leadership again in June 2007 with COO Mark Durcan becoming president. In 2008, Micron converted the Avezzano chip fab, formerly a Texas Instruments DRAM fab, into a production facility for CMOS image sensors sold by Aptina Imaging. In 2008, Micron spun off Aptina Imaging, which was acquired by ON Semiconductor in 2014. Micron retained a stake in the spinoff. However, the core company suffered setbacks and had to lay off 15 percent of its workforce in October 2008, during which period the company also announced the purchase of Qimonda's 35.6 percent stake in Inotera Memories for $400 million. The trend of layoffs and acquisitions continued in 2009 with the termination of an additional 2,000 employees, and the acquisition of the FLCOS microdisplay company Displaytech. Micron agreed to buy flash-chip maker Numonyx for $1.27 billion in stock in February 2010. On February 3, 2012, CEO Appleton died in a plane crash shortly after takeoff from the Boise Airport. He was the pilot and sole occupant of the Lancair IV aircraft. Mark Durcan replaced Appleton as the CEO shortly thereafter, eliminating his former title of president. In 2013, the Avezzano chip fab was sold to LFoundry. In the 2012 to 2014 period, Micron again went through an acquisition-layoff cycle, becoming the majority shareholder of Inotera Memories, purchasing Elpida Memory for $2 billion and the remaining shares in Rexchip, a PC memory chip manufacturing venture between Powerchip and Elpida Memory for $334 million, while announcing plans to lay off approximately 3,000 workers. Through the Elpida acquisition, Micron became a major supplier to Apple Inc. for the iPhone and iPad. In December 2016 Micron finished acquiring the remaining 67 percent of Inotera, making it a 100 percent subsidiary of Micron. In April 2017, Micron announced Sanjay Mehrotra as the new president and CEO to replace Mark Durcan. In June 2017 Micron announced it was discontinuing the Lexar retail removable media storage business and putting some or all of it up for sale. In August of that year the Lexar brand was acquired by Longsys, a flash memory company based in Shenzhen, China. In May 2018, Micron Technology and Intel launched QLC NAND memory to increase storage density. The company ranked 150th on the Fortune 500 list of largest United States corporations by revenue. In February 2019, the first microSD card with a storage capacity of 1 terabyte (TB) was announced by Micron. As of March 2020 3.84TB Micron 5210 Ion is the cheapest large-capacity SSD in the world. In September 2020 the company introduced the world's fastest discrete graphics memory solution. Working with computing technology leader Nvidia, Micron debuted GDDR6X in the Nvidia GeForce RTX 3090 and GeForce RTX 3080 graphics processing units (GPUs). In November 2020, the company unveiled a new 176-layer 3D NAND module. It offers improved read and write latency and is slated to be used in the production of a new generation of solid-state drives. On October 22, 2021, Micron closed the sale of IM Flash's Lehi, Utah fab to Texas Instruments for a sale price of US$900 million. In February 2022, Micron announced that it would discontinue its Ballistix gaming brand. With the passage of the CHIPS and Science Act, Micron announced its pledge to invest billions in new manufacturing within the United States. In September 2022, Micron announced it would invest $15 billion in a new facility in Boise, Idaho. In October 2022, Micron announced a $100 billion expansion in Clay, New York. Micron Technology owed Netlist, Inc. $445 million in damages for infringing Netlist's patents related to memory-module technology for high-performance computing. The jury found that Micron's semiconductor-memory products violated two of Netlist's patents willfully, potentially allowing the judge to triple the damages. Netlist had sued Micron in 2022, accusing three of its memory-module lines of patent infringement, which Micron denied, also arguing the patents' invalidity. The U.S.

, social and environmental value and social design. The scope of a project can range from a local street or public space to an entire city and surrounding areas.

Urban design deals with the larger scale of groups of buildings, infrastructure, streets, and public spaces, entire neighbourhoods and districts, and entire cities, with the goal of making urban environments that are equitable, beautiful, performative, and sustainable. Urban design is an interdisciplinary field that utilizes the procedures and the elements of architecture and other related professions, including landscape design, urban planning, civil engineering, and municipal engineering, while extenuating to the Spatial Sciences. It borrows substantive and procedural knowledge from public administration, sociology, law, urban geography, urban economics and other related disciplines from the social and behavioral sciences, as well as from the natural sciences. In more recent times different sub-subfields of urban design have emerged such as strategic urban design, landscape urbanism, water-sensitive urban design, and sustainable urbanism.

The beginnings of modern urban design in Europe are associated with the Renaissance but, especially, with the Age of Enlightenment. Spanish colonial cities were often planned, as were some towns settled by other imperial cultures. These sometimes embodied utopian ambitions as well as aims for functionality and good governance, as with James Oglethorpe's plan for Savannah, Georgia. In the Baroque period the design approaches developed in French formal gardens such as Versailles were extended into urban development and redevelopment. In this period, when modern professional specializations did not exist, urban design was undertaken by people with skills in areas as diverse as sculpture, architecture, garden design, surveying, astronomy, and military engineering. In the 18th and 19th centuries, urban design was perhaps most closely linked with surveyors engineers and architects.

nctionally integrated, and that provides pedestrian connections. Mixed-use development may be applied to a single building, a block or neighborhood, or in zoning policy across an entire city or other administrative unit. These projects may be completed by a private developer, (quasi-) governmental agency, or a combination thereof.

Canada One of the first cities to adopt a policy on mixed-use development is Toronto. The local government first played a role in 1986 with a zoning bylaw that allowed for commercial and residential units to be mixed. At the time, Toronto was in the beginning stages of planning a focus on developing mixed-use development due to the growing popularity of more social housing. The law has since been updated as recently as 2013, shifting much of its focus outside the downtown area which has been a part of the main city since 1998. With the regulations in place, the city has overseen the development of high-rise condominiums throughout the city with amenities and transit stops nearby. Toronto's policies of mixed-use development have inspired other North American cities in Canada and the United States to bring about similar changes. One example of a Toronto mixed-use development is Mirvish Village by architect Gregory Henriquez. Located at Bloor and Bathurst Street, a significant intersection in Toronto, portions of the Mirvish Village project site are zoned as "commercial residential" and others as "mixed commercial residential". Within the City of Toronto's zoning by-laws, commercial residential includes "a range of commercial, residential and institutional uses, as well as parks." Mirvish Village's programmatic uses include rental apartments, a public market, and small-unit retail, while also preserving 23 of 27 heritage houses on site. The project is notable for its public consultation process, which was lauded by Toronto city officials. Architect Henriquez and the developer had previously collaborated on mixed-use projects in Vancouver, British Columbia, including the successful Woodward's Redevelopment. United States In the United States, the Environmental Protection Agency (EPA) collaborates with local governments by providing researchers developing new data that estimates how a city can be impacted by mixed-use development. With the EPA putting models in the spreadsheet, it makes it much easier for municipalities, and developers to estimate the traffic, with Mixed-use spaces. The linking models also used as a resource tool measures the geography, demographics, and land use characteristics in a city. The Environmental Protection Agency has conducted an analysis on six major metropolitan areas using land usage, household surveys, and GIS databases. States such as California, Washington, New Mexico, and Virginia have adopted this standard as statewide policy when assessing how urban developments can impact traffic. Preconditions for the success of mixed-use developments are employment, population, and consumer spending. The three preconditions ensure that a development can attract quality tenants and financial success.

In the United States, the Environmental Protection Agency (EPA) collaborates with local governments by providing researchers developing new data that estimates how a city can be impacted by mixed-use development. With the EPA putting models in the spreadsheet, it makes it much easier for municipalities, and developers to estimate the traffic, with Mixed-use spaces. The linking models also used as a resource tool measures the geography, demographics, and land use characteristics in a city. The Environmental Protection Agency has conducted an analysis on six major metropolitan areas using land usage, household surveys, and GIS databases. States such as California, Washington, New Mexico, and Virginia have adopted this standard as statewide policy when assessing how urban developments can impact traffic. Preconditions for the success of mixed-use developments are employment, population, and consumer spending. The three preconditions ensure that a development can attract quality tenants and financial success.

es required by government or civil law, such as property sales. A professional in land surveying is called a land surveyor. Surveyors work with elements of geodesy, geometry, trigonometry, regression analysis, physics, engineering, metrology, programming languages, and the law. They use equipment, such as total stations, robotic total stations, theodolites, GNSS receivers, retroreflectors, 3D scanners, lidar sensors, radios, inclinometer, handheld tablets, optical and digital levels, subsurface locators, drones, GIS, and surveying software. Surveying has been an element in the development of the human environment since the beginning of recorded history. It is used in the planning and execution of most forms of construction. It is also used in transportation, communications, mapping, and the definition of legal boundaries for land ownership.

of determining the terrestrial positions of points based on the distances and angles between them. These points are usually on the surface of the Earth, and they are often used to establish maps and boundaries for ownership, locations, such as the designated positions of structural components for construction or the surface location of subsurface features, or other purposes required by government or civil law, such as property sales. A professional in land surveying is called a land surveyor. Surveyors work with elements of geodesy, geometry, trigonometry, regression analysis, physics, engineering, metrology, programming languages, and the law. They use equipment, such as total stations, robotic total stations, theodolites, GNSS receivers, retroreflectors, 3D scanners, lidar sensors, radios, inclinometer, handheld tablets, optical and digital levels, subsurface locators, drones, GIS, and surveying software. Surveying has been an element in the development of the human environment since the beginning of recorded history. It is used in the planning and execution of most forms of construction. It is also used in transportation, communications, mapping, and the definition of legal boundaries for land ownership.

ince the beginning of recorded history. It is used in the planning and execution of most forms of construction. It is also used in transportation, communications, mapping, and the definition of legal boundaries for land ownership.

, Arts & Sciences, and Education; MPA program in the School of Public Service; and the MPH program in the College of Health Sciences. It is classified among "R2: Doctoral Universities – High research activity".

The university also has an honors college. Within the College of Arts and Sciences is the School of the Environment, approved by the Idaho State Board of Education in 2022 and established in 2023. Boise State's fall enrollment in 2016 was 23,886 students, and approximately 76 percent of these students were Idaho residents. More than 90 percent of Boise State's first-year students come directly from high school. In the 2015–16 school year, Boise State awarded diplomas to 3,916 distinct graduates, including 18 doctorates, 10 education specialists, 670 master's and 2,998 bachelor's degrees. The university is classified among "R2: Doctoral Universities – High research spending and doctorate production".

I as a member of the Mountain West Conference. History The school became Idaho's third state university in 1974, after the University of Idaho (1889) and Idaho State University (1963). Boise State awards associate, bachelor's, master's, and doctoral degrees, and is accredited by the Northwest Commission on Colleges and Universities. As of 2010, it has over 75,000 living alumni. Campus The 285-acre (1.15 km2) campus is located near downtown Boise, on the south bank of the Boise River, opposite Julia Davis Park. With more than 170 buildings, the campus is at an elevation of 2,700 feet (825 m) above sea level, bounded by Capitol Boulevard on the west and Broadway Avenue to the east.

for land use and the built environment, including air, water, and the infrastructure passing into and out of urban areas, such as transportation, communications, and distribution networks, and their accessibility. Traditionally, urban planning followed a top-down approach in master planning the physical layout of human settlements. The primary concern was the public welfare, which included considerations of efficiency, sanitation, protection and use of the environment, as well as taking account of effects of the master plans on the social and economic activities. Over time, urban planning has adopted a focus on the social and environmental "bottom lines" that focuses on using planning as a tool to improve the health and well-being of people and maintain sustainability standards. In the mid-20th century, urban planning experts such as Jane Jacobs called on urban planners to take resident experiences and needs more into consideration. Urban planning answers questions about how people will live, work, and play in a given area and thus, guides orderly development in urban, suburban and rural areas. Although predominantly concerned with the planning of settlements and communities, urban planners are also responsible for planning the efficient transportation of goods, resources, people, and waste. The distribution of basic necessities such as water and electricity; a sense of inclusion and opportunity for people of all kinds, culture and needs; economic growth or business development; improving health and conserving areas of natural environmental significance that actively contribute to reduction in CO2 emissions as well as protecting heritage structures and built environments. Since most urban planning teams consist of highly educated individuals that work for city governments, recent debates focus on how to involve more community members in city planning processes. Urban planning is an interdisciplinary field that includes civil engineering, architecture, human geography, social science and design sciences. Practitioners of urban planning use research and analysis, strategic thinking, engineering architecture, urban design, public consultation, policy recommendations, implementation and management. It is closely related to the field of urban design and some urban planners provide designs for streets, parks, buildings and other urban areas. Urban planners work with the cognate fields of civil engineering, landscape architecture, architecture, and public administration to achieve strategic, policy and sustainability goals. Early urban planners were often members of these cognate fields though in the 21st century, urban planning is a separate, independent professional discipline. The discipline of urban planning is the broader category that includes different sub-fields such as land-use planning, zoning, economic development, environmental planning, and transportation planning. Creating the plans requires a thorough understanding of penal codes and zonal codes of planning. Another important aspect of urban planning is that projects range from the large-scale planning of new towns and Greenfield projects to the transformation and renewal of existing cities, neighborhoods, and public spaces. Pierre Charles L'Enfant and Lúcio Costa are known for planning new capital cities, while Daniel Burnham's Plan of Chicago, Georges-Eugene Haussmann's renovation of Paris, and the urban renewal projects of Robert Moses exemplify the large-scale reshaping of existing urban environments.

urban planners provide designs for streets, parks, buildings and other urban areas. Urban planners work with the cognate fields of civil engineering, landscape architecture, architecture, and public administration to achieve strategic, policy and sustainability goals. Early urban planners were often members of these cognate fields though in the 21st century, urban planning is a separate, independent professional discipline. The discipline of urban planning is the broader category that includes different sub-fields such as land-use planning, zoning, economic development, environmental planning, and transportation planning. Creating the plans requires a thorough understanding of penal codes and zonal codes of planning. Another important aspect of urban planning is that projects range from the large-scale planning of new towns and Greenfield projects to the transformation and renewal of existing cities, neighborhoods, and public spaces. Pierre Charles L'Enfant and Lúcio Costa are known for planning new capital cities, while Daniel Burnham's Plan of Chicago, Georges-Eugene Haussmann's renovation of Paris, and the urban renewal projects of Robert Moses exemplify the large-scale reshaping of existing urban environments.

rations of efficiency, sanitation, protection and use of the environment, as well as taking account of effects of the master plans on the social and economic activities. Over time, urban planning has adopted a focus on the social and environmental "bottom lines" that focuses on using planning as a tool to improve the health and well-being of people and maintain sustainability standards. In the mid-20th century, urban planning experts such as Jane Jacobs called on urban planners to take resident experiences and needs more into consideration. Urban planning answers questions about how people will live, work, and play in a given area and thus, guides orderly development in urban, suburban and rural areas. Although predominantly concerned with the planning of settlements and communities, urban planners are also responsible for planning the efficient transportation of goods, resources, people, and waste. The distribution of basic necessities such as water and electricity; a sense of inclusion and opportunity for people of all kinds, culture and needs; economic growth or business development; improving health and conserving areas of natural environmental significance that actively contribute to reduction in CO2 emissions as well as protecting heritage structures and built environments. Since most urban planning teams consist of highly educated individuals that work for city governments, recent debates focus on how to involve more community members in city planning processes. Urban planning is an interdisciplinary field that includes civil engineering, architecture, human geography, social science and design sciences. Practitioners of urban planning use research and analysis, strategic thinking, engineering architecture, urban design, public consultation, policy recommendations, implementation and management. It is closely related to the field of urban design and some urban planners provide designs for streets, parks, buildings and other urban areas. Urban planners work with the cognate fields of civil engineering, landscape architecture, architecture, and public administration to achieve strategic, policy and sustainability goals. Early urban planners were often members of these cognate fields though in the 21st century, urban planning is a separate, independent professional discipline. The discipline of urban planning is the broader category that includes different sub-fields such as land-use planning, zoning, economic development, environmental planning, and transportation planning. Creating the plans requires a thorough understanding of penal codes and zonal codes of planning. Another important aspect of urban planning is that projects range from the large-scale planning of new towns and Greenfield projects to the transformation and renewal of existing cities, neighborhoods, and public spaces. Pierre Charles L'Enfant and Lúcio Costa are known for planning new capital cities, while Daniel Burnham's Plan of Chicago, Georges-Eugene Haussmann's renovation of Paris, and the urban renewal projects of Robert Moses exemplify the large-scale reshaping of existing urban environments.

velopers, subcontractors, manufacturers of building products and materials, insurance companies, facility managers, tenants, and others. Codes regulate the design and construction of structures where adopted into law. Examples of building codes began in ancient times. In the USA the main codes are the International Building Code or International Residential Code [IBC/IRC], electrical codes and plumbing, mechanical codes. Fifty states and the District of Columbia have adopted the I-Codes at the state or jurisdictional level. In Canada, national model codes are published by the National Research Council of Canada. In the United Kingdom, compliance with Building Regulations is monitored by building control bodies, either Approved Inspectors or Local Authority Building Control departments.

the USA the main codes are the International Building Code or International Residential Code [IBC/IRC], electrical codes and plumbing, mechanical codes. Fifty states and the District of Columbia have adopted the I-Codes at the state or jurisdictional level. In Canada, national model codes are published by the National Research Council of Canada. In the United Kingdom, compliance with Building Regulations is monitored by building control bodies, either Approved Inspectors or Local Authority Building Control departments.

Types The practice of developing, approving, and enforcing building codes varies considerably among nations. In some countries building codes are developed by the government agencies or quasi-governmental standards organizations and then enforced across the country by the central government. Such codes are known as the national building codes (in a sense they enjoy a mandatory nationwide application). In other countries, where the power of regulating construction and fire safety is vested in local authorities, a system of model building codes is used. Model building codes have no legal status unless adopted or adapted by an authority having jurisdiction. The developers of model codes urge public authorities to reference model codes in their laws, ordinances, regulations, and administrative orders. When referenced in any of these legal instruments, a particular model code becomes law. This practice is known as 'adoption by reference'. When an adopting authority decides to delete, add, or revise any portions of the model code adopted, it is usually required by the model code developer to follow a formal adoption procedure in which those modifications can be documented for legal purposes. There are instances when some local jurisdictions choose to develop their own building codes. At some point in time all major cities in the United States had their own building codes. However, due to ever increasing complexity and cost of developing building regulations, virtually all municipalities in the country have chosen to adopt model codes instead. For example, in 2008 New York City abandoned its proprietary 1968 New York City Building Code in favor of a customized version of the International Building Code. The City of Chicago remains the only municipality in America that continues to use a building code the city developed on its own as part of the Municipal Code of Chicago. In Europe, the Eurocode: Basis of structural design, is a pan-European building code that has superseded the older national building codes. Each country now has National Annexes to localize the contents of the Eurocodes. Similarly, in India, each municipality and urban development authority has its own building code, which is mandatory for all construction within their jurisdiction.

Irrigation in agriculture is the practice of applying controlled amounts of water to land to help grow crops, landscape plants, and lawns. Irrigation has been a key aspect of agriculture for over 5,000 years and has been developed by many cultures worldwide. Irrigation helps to grow crops, maintain landscapes, and revegetate disturbed soils in dry areas and during times of below-average rainfall. In addition to these uses, irrigation is also employed to protect crops from frost, suppress weed growth in grain fields, and prevent soil consolidation. It is also used to cool livestock, reduce dust, dispose of sewage, and support mining operations. Drainage, which involves the removal of surface and sub-surface water from a given location, is often studied in conjunction with irrigation. Irrigation and drainage improvements are not necessarily mutually exclusive. Often both may be required together to assure sustained high-level production of crops. For a discussion of the role of drainage practices in agriculture . Several irrigation methods differ in how water is supplied to plants. Surface irrigation, also known as gravity irrigation, is the oldest form of irrigation and has been in use for thousands of years. In sprinkler irrigation, water is piped to one or more central locations within the field and distributed by overhead high-pressure water devices. Micro-irrigation is a system that distributes water under low pressure through a piped network and applies it as a small discharge to each plant. Micro-irrigation uses less pressure and water flow than sprinkler irrigation. Drip irrigation delivers water directly to the root zone of plants. Subirrigation has been used in field crops in areas with high water tables for many years. It involves artificially raising the water table to moisten the soil below the root zone of plants. Irrigation water can come from groundwater (extracted from springs or by using wells), from surface water (withdrawn from rivers, lakes or reservoirs) or from non-conventional sources like treated wastewater, desalinated water, drainage water, or fog collection. Irrigation can be supplementary to rainfall, which is common in many parts of the world as rainfed agriculture, or it can be full irrigation, where crops rarely rely on any contribution from rainfall. Full irrigation is less common and occurs only in arid landscapes with very low rainfall or when crops are grown in semi-arid areas outside the rainy season. The environmental effects of irrigation relate to the changes in quantity and quality of soil and water as a result of irrigation and the subsequent effects on natural and social conditions in river basins and downstream of an irrigation scheme. The effects stem from altered hydrological conditions resulting from the installation and operation of the irrigation scheme. Amongst these problems is the depletion of underground aquifers through overdrafting. Soil can be over-irrigated due to poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

nage improvements are not necessarily mutually exclusive. Often both may be required together to assure sustained high-level production of crops. For a discussion of the role of drainage practices in agriculture . Several irrigation methods differ in how water is supplied to plants. Surface irrigation, also known as gravity irrigation, is the oldest form of irrigation and has been in use for thousands of years. In sprinkler irrigation, water is piped to one or more central locations within the field and distributed by overhead high-pressure water devices. Micro-irrigation is a system that distributes water under low pressure through a piped network and applies it as a small discharge to each plant. Micro-irrigation uses less pressure and water flow than sprinkler irrigation. Drip irrigation delivers water directly to the root zone of plants. Subirrigation has been used in field crops in areas with high water tables for many years. It involves artificially raising the water table to moisten the soil below the root zone of plants. Irrigation water can come from groundwater (extracted from springs or by using wells), from surface water (withdrawn from rivers, lakes or reservoirs) or from non-conventional sources like treated wastewater, desalinated water, drainage water, or fog collection. Irrigation can be supplementary to rainfall, which is common in many parts of the world as rainfed agriculture, or it can be full irrigation, where crops rarely rely on any contribution from rainfall. Full irrigation is less common and occurs only in arid landscapes with very low rainfall or when crops are grown in semi-arid areas outside the rainy season. The environmental effects of irrigation relate to the changes in quantity and quality of soil and water as a result of irrigation and the subsequent effects on natural and social conditions in river basins and downstream of an irrigation scheme. The effects stem from altered hydrological conditions resulting from the installation and operation of the irrigation scheme. Amongst these problems is the depletion of underground aquifers through overdrafting. Soil can be over-irrigated due to poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

-conventional sources like treated wastewater, desalinated water, drainage water, or fog collection. Irrigation can be supplementary to rainfall, which is common in many parts of the world as rainfed agriculture, or it can be full irrigation, where crops rarely rely on any contribution from rainfall. Full irrigation is less common and occurs only in arid landscapes with very low rainfall or when crops are grown in semi-arid areas outside the rainy season. The environmental effects of irrigation relate to the changes in quantity and quality of soil and water as a result of irrigation and the subsequent effects on natural and social conditions in river basins and downstream of an irrigation scheme. The effects stem from altered hydrological conditions resulting from the installation and operation of the irrigation scheme. Amongst these problems is the depletion of underground aquifers through overdrafting. Soil can be over-irrigated due to poor distribution uniformity or management wastes water, chemicals, and may lead to water pollution.

defined to distinguish non-military engineering from military engineering. Civil engineering can take place in the public sector from municipal public works departments through to national government agencies, and in the private sector from locally based firms to Fortune Global 500 companies. History As a discipline Civil engineering is the application of physical and scientific principles for solving the problems of society, and its history is intricately linked to advances in the understanding of physics and mathematics throughout history. Because civil engineering is a broad profession, including several specialized sub-disciplines, its history is linked to knowledge of structures, materials science, geography, geology, soils, hydrology, environmental science, mechanics, project management, and other fields. Throughout ancient and medieval history most architectural design and construction was carried out by artisans, such as stonemasons and carpenters, rising to the role of master builder. Knowledge was retained in craft guilds and seldom supplanted by advances. Structures, roads, and infrastructure that existed were repetitive, and increases in scale were incremental. One of the earliest examples of a scientific approach to physical and mathematical problems applicable to civil engineering is the work of Archimedes in the 3rd century BC, including Archimedes' principle, which underpins our understanding of buoyancy, and practical solutions such as Archimedes' screw.

nstruction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewage systems, pipelines, structural components of buildings, and railways. Civil engineering is traditionally broken into a number of sub-disciplines. It is considered the second-oldest engineering discipline after military engineering, and it is defined to distinguish non-military engineering from military engineering.

Site development, also known as site planning, is focused on the planning and development potential of a site as well as addressing possible impacts from permitting issues and environmental challenges. Structural engineering Structural engineering is concerned with the structural design and structural analysis of buildings, bridges, towers, flyovers (overpasses), tunnels, off shore structures like oil and gas fields in the sea, aerostructure and other structures. This involves identifying the loads which act upon a structure and the forces and stresses which arise within that structure due to those loads, and then designing the structure to successfully support and resist those loads. The loads can be self weight of the structures, other dead load, live loads, moving (wheel) load, wind load, earthquake load, load from temperature change etc. The structural engineer must design structures to be safe for their users and to successfully fulfill the function they are designed for (to be serviceable). Due to the nature of some loading conditions, sub-disciplines within structural engineering have emerged, including wind engineering and earthquake engineering. Design considerations will include strength, stiffness, and stability of the structure when subjected to loads which may be static, such as furniture or self-weight, or dynamic, such as wind, seismic, crowd or vehicle loads, or transitory, such as temporary construction loads or impact.

Southern Idaho and North Idaho College, in Idaho and is governed by a five-member board of trustees elected at large by voters in Ada and Canyon counties. CWI offers over 120 programs in the areas of Academic Transfer, Dual Credit, Career and Technical Education, Workforce Development, and Adult Education. In fall of 2023, CWI served 21,359 credit students and 14,951 noncredit students. CWI reported the gender of their students to be 55% female and 45% male.

History Prior to the creation of CWI, Boise was one of the largest metropolitan statistical areas in the United States without a community college. CWI was created on May 22, 2007, when voters of Canyon and Ada counties passed a measure to allow the formation of the new community college district. In June 2007, the Albertson Foundation announced it was donating $10 million to help found the college. In July 2007, the Idaho State Board of Education selected an initial five-member board of trustees. The following month Boise State University faculty member Dennis Griffin was named to a two-year term as the college's first president and CWI began offering academic classes on January 20, 2009, with an enrollment of over 1,100 students. In the summer of 2009 the professional-technical programs from Boise State University's Selland College of Applied Technology transitioned to CWI. By the fall 2009 semester, CWI enrollment had expanded to over 3,600 students. In January 2010, CWI applied for accreditation from the Northwest Commission on Colleges and Universities (NWCCU). NWCCU granted candidacy status at the associate degree level in 2012 and initial accreditation in 2016. President Griffin retired in August 2009 and was succeeded by Bert Glandon. After serving as president for 12 years, Glandon retired from CWI on May 15, 2021. The college's board of trustees named Denise Aberle-Cannata the interim president. CWI Board of Trustees extended an offer to Gordon Jones on Dec. 9, 2021 to be the next president at College of Western Idaho. Gordon Jones accepted the position of President at CWI and began his tenure as the third president in CWI's history on Jan.

Catchment area The college's catchment area includes all of the following counties: Ada, Adams, Boise, Canyon, Gem, Payette, Valley, and Washington. It also includes portions of Elmore and Owyhee counties. Ada and Canyon counties are the taxation zone for the college. Student life CWI has over 30 student clubs and organizations. Student clubs have been created with academic focus as well as special interests. Student groups range from art to physics, horticulture, psychology, Glee, Birdies and Bogies, a Veterans Association, and more. The Associated Students of the College of Western Idaho (ASCWI) serve as the voice of the student body. ASCWI is governed by five officers and eight senators elected by the student body each spring. CWI students participate in competitive, skills-based organizations like Business Professionals of America, SkillsUSA, and Speech and Debate. CWI students have found success at state, regional, and national levels in all three organizations. CWI Speech and Debate captured seven Pi Kappa Delta Community College National Championships in 2011, 2012, 2013, 2015, 2016, 2017, and 2018. Students have earned individual medals at national skills competitions as well. Students have the opportunity to engage on campus through the CWI Presidential Ambassador Program, which promotes leadership and connects students to campus and community events.

ern Oregon to Boise, and is the most populated area in Idaho. Historically, the valley had been known as the Lower Snake River Valley or the Boise River Valley. Pete Olesen, president of the valley's association of local Chambers of Commerce, coined the name "Treasure Valley" in 1959 to reflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas.

The Treasure Valley is a valley in the western United States, primarily in southwestern Idaho, where the Payette, Boise, Weiser, Malheur, and Owyhee rivers drain into the Snake River. It includes all the lowland areas from Vale in rural eastern Oregon to Boise, and is the most populated area in Idaho. Historically, the valley had been known as the Lower Snake River Valley or the Boise River Valley. Pete Olesen, president of the valley's association of local Chambers of Commerce, coined the name "Treasure Valley" in 1959 to reflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas.

eflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas. As the Boise Metropolitan Area grows, more and more undeveloped and agricultural land is being urbanized. History Settling the region The tribes that roamed the area, specifically, were the Northern Paiute and Shoshone. In 1834, Thomas McKay built the original Fort Boise, in the area near present-day Parma, which was run for a time by Francois Payette. It later was moved because of flooding troubles and was abandoned in 1854. The Oregon Trail runs through the Treasure Valley. The valley was settled for the most part by ranchers and farmers, initially to supply the gold and silver mining communities in the higher elevations nearby: Idaho City in the Boise Basin and Silver City in the Owyhees. A new Fort Boise was constructed by the U.S. Army in 1863 in present-day Boise, from which the city grew.

rid areas where irrigation is practiced, such systems are often the source of conflict, both legal and physical. Some systems treat surface water and ground water in the same manner, while others use different principles for each. Types Water rights requires consideration of the context and origin of the right being discussed, or asserted. Traditionally, water rights refers to the utilization of water as an element supporting basic human needs like drinking or irrigation. Water rights could also include the physical occupancy of waterways for purposes of travel, commerce and recreational pursuits. The legal principles and doctrines that form the basis of each type of water rights are not interchangeable and vary according to local and national laws.

In water law, water right is the right of a user to use water from a water source, e.g., a river, stream, pond or source of groundwater. In areas with plentiful water and few users, such systems are generally not complicated or contentious. In other areas, especially arid areas where irrigation is practiced, such systems are often the source of conflict, both legal and physical.

Community-based allocation of water In some jurisdictions, appropriative water rights can be granted directly to communities. Here, water is reserved to provide sufficient capacity for the future growth of that particular community. For example, California provides communities and other water users within watersheds senior status over appropriative (use-based) water rights solely because they are located where the water originates and naturally flows. A second example of community-based water rights is pueblo water rights. As recognized by California, pueblo water rights are grants to individual settlements (i.e. pueblos) over all streams and rivers flowing through the city and to all groundwater aquifers underlying that particular city. The pueblo's claim expands with the needs of the city and may be used to supply the needs of areas that are later annexed to the city. While California recognizes pueblo water rights, pueblo water rights are controversial.

the Northwestern United States. It drains a rugged portion of the Sawtooth Range in southwestern Idaho northeast of Boise, as well as part of the western Snake River Plain. The watershed encompasses approximately 4,100 square miles (11,000 km2) of highly diverse habitats, including alpine canyons, forest, rangeland, agricultural lands, and urban areas. Description The Boise River rises in three separate forks in the Sawtooth Range at elevations exceeding 10,000 feet (3,050 m), and is formed by the confluence of its North and Middle forks. The North Fork, 50 miles (80 km) long, rises in the Sawtooth Wilderness Area, along the Boise–Elmore county line, 60 miles (100 km) northeast of Boise. It flows generally southwest through the remote mountains in the Boise National Forest. The Middle Fork, approximately 52 miles (84 km) in length, rises within 12 miles (19 km) of the North Fork in the southern Sawtooth Wilderness Area in northeastern Elmore County. It flows west-southwest near the town of Atlanta, joining the North Fork to form the Boise River, approximately 15 miles (24 km) southeast of Idaho City.

Description The Boise River rises in three separate forks in the Sawtooth Range at elevations exceeding 10,000 feet (3,050 m), and is formed by the confluence of its North and Middle forks. The North Fork, 50 miles (80 km) long, rises in the Sawtooth Wilderness Area, along the Boise–Elmore county line, 60 miles (100 km) northeast of Boise. It flows generally southwest through the remote mountains in the Boise National Forest. The Middle Fork, approximately 52 miles (84 km) in length, rises within 12 miles (19 km) of the North Fork in the southern Sawtooth Wilderness Area in northeastern Elmore County. It flows west-southwest near the town of Atlanta, joining the North Fork to form the Boise River, approximately 15 miles (24 km) southeast of Idaho City.

The watershed encompasses approximately 4,100 square miles (11,000 km2) of highly diverse habitats, including alpine canyons, forest, rangeland, agricultural lands, and urban areas. Description The Boise River rises in three separate forks in the Sawtooth Range at elevations exceeding 10,000 feet (3,050 m), and is formed by the confluence of its North and Middle forks. The North Fork, 50 miles (80 km) long, rises in the Sawtooth Wilderness Area, along the Boise–Elmore county line, 60 miles (100 km) northeast of Boise. It flows generally southwest through the remote mountains in the Boise National Forest. The Middle Fork, approximately 52 miles (84 km) in length, rises within 12 miles (19 km) of the North Fork in the southern Sawtooth Wilderness Area in northeastern Elmore County. It flows west-southwest near the town of Atlanta, joining the North Fork to form the Boise River, approximately 15 miles (24 km) southeast of Idaho City.

The Boise, Idaho Metropolitan Statistical Area (MSA) (commonly known as the Boise Metropolitan Area or the Treasure Valley) is an area that encompasses Ada, Boise, Canyon, Gem, and Owyhee counties in southwestern Idaho, anchored by the cities of Boise and Nampa. It is the main component of the wider Boise–Mountain Home–Ontario, ID–OR Combined Statistical Area, which adds Elmore and Payette counties in Idaho and Malheur County, Oregon. It is the state's largest officially designated metropolitan area and includes Idaho's three largest cities: Boise, Nampa, and Meridian.

Four-year colleges and universities Northwest Nazarene University (NNU), Nampa, Idaho The College of Idaho (C of I), Caldwell, Idaho University of Idaho (U of I), Boise; Extension Campus Idaho State University (ISU), Meridian, Idaho; Extension Campus Community colleges and trade schools College of Western Idaho, Nampa, Idaho (CWI) Nampa; Main Campus, Aspen Classroom Bldg., Canyon County Extension Boise; Ada County Campus Treasure Valley Community College, Caldwell, Idaho (TVCC) Ontario, Oregon; Main Campus Caldwell, Idaho; Caldwell Campus Northwest Lineman College (NLC), Kuna, Idaho Heavy Equipment Operator School of Idaho, Boise Carrington College, Boise Broadview University, Meridian, Idaho University of Phoenix Meridian; Main Campus Boise Bible College, Boise

tistical Area, which adds Elmore and Payette counties in Idaho and Malheur County, Oregon. It is the state's largest officially designated metropolitan area and includes Idaho's three largest cities: Boise, Nampa, and Meridian. Nearly 40 percent of Idaho's total population lives in the area. As of the 2021 estimate, the Boise–Nampa, Idaho Metropolitan Statistical Area (MSA) had a population of 795,268, while the larger Boise City–Mountain Home–Ontario, ID–OR Combined Statistical Area (CSA) had a population of 850,341. The metro area is currently the third largest in the U.S.

Planning permission or building permit refers to the approval needed for construction or expansion (including significant renovation), and sometimes for demolition, in some jurisdictions. House building permits, for example, are subject to building codes. There is also a "plan check" (PLCK) to check compliance with plans for the area, if any. For example, one cannot obtain permission to build a nightclub in an area where it is inappropriate such as a high-density suburb. The criteria for planning permission are a part of urban planning and construction law, and are usually managed by town planners employed by local governments. Failure to obtain a permit can result in fines, penalties, and demolition of unauthorized construction if it cannot be made to meet code. Generally, the new construction must be inspected during construction and after completion to ensure compliance with national, regional, and local building codes. Since building permits usually precede outlays for construction, employment, financing and furnishings, they are often used as a leading indicator for development in other areas of the economy. The number of building permits issued per year varies by country.

oyment, financing and furnishings, they are often used as a leading indicator for development in other areas of the economy. The number of building permits issued per year varies by country. By-right approval processes can be faster than discretionary approval processes. In specific industries Broadcasting As part of broadcast law, the term is also used in broadcasting, where individual radio and television stations typically must apply for and receive permission to construct radio towers and radio antennas. This type of permit is issued by a national broadcasting authority, but does not imply zoning any other permission that must be given by local government. The permit itself also does not necessarily imply permission to operate the station once constructed. In the U.S., a construction permit is valid for three years. Afterwards, the station must receive a full license to operate, which is good for seven years. This is provided by a separate broadcast license, also called a "license to cover" by the Federal Communications Commission (FCC) in the United States. Further permission or registration for towers may be needed from aviation authorities. In the U.S., construction permits for new commercial stations are now assigned by auction, rather than the former process of determining who would serve the community of license best.

ized construction if it cannot be made to meet code. Generally, the new construction must be inspected during construction and after completion to ensure compliance with national, regional, and local building codes. Since building permits usually precede outlays for construction, employment, financing and furnishings, they are often used as a leading indicator for development in other areas of the economy. The number of building permits issued per year varies by country.

In business, mergers and acquisitions (M&A) are transactions where the ownership of a company, business organization, or one of their operating units is transferred to or consolidated with another entity. They may happen through direct absorption, a merger, a tender offer or a hostile takeover. As a central aspect of corporate strategy and strategic management, M&A activity enables companies to expand, diversify, restructure, or realign their competitive position. In legal terms, a merger is the consolidation of two entities into a single legal entity, whereas an acquisition occurs when one entity takes ownership of another entity's share capital, equity interests or assets. Both typically result in assets, liabilities, and operations being combined under unified control, and a transaction described as a merger may economically resemble an acquisition, and vice versa. M&A transactions are governed by corporate law and are typically subject to regulatory review, particularly under competition (antitrust) law. Many countries require notification and review of proposed mergers to allow the government to assess their potential effects on market competition. In the United States, for example, the Clayton Act prohibits any merger or acquisition that may "substantially lessen competition" or "tend to create a monopoly", and the Hart–Scott–Rodino Act requires providing advance notice to the U.S.

tivity enables companies to expand, diversify, restructure, or realign their competitive position. In legal terms, a merger is the consolidation of two entities into a single legal entity, whereas an acquisition occurs when one entity takes ownership of another entity's share capital, equity interests or assets. Both typically result in assets, liabilities, and operations being combined under unified control, and a transaction described as a merger may economically resemble an acquisition, and vice versa. M&A transactions are governed by corporate law and are typically subject to regulatory review, particularly under competition (antitrust) law. Many countries require notification and review of proposed mergers to allow the government to assess their potential effects on market competition. In the United States, for example, the Clayton Act prohibits any merger or acquisition that may "substantially lessen competition" or "tend to create a monopoly", and the Hart–Scott–Rodino Act requires providing advance notice to the U.S.

al, equity interests or assets. Both typically result in assets, liabilities, and operations being combined under unified control, and a transaction described as a merger may economically resemble an acquisition, and vice versa. M&A transactions are governed by corporate law and are typically subject to regulatory review, particularly under competition (antitrust) law. Many countries require notification and review of proposed mergers to allow the government to assess their potential effects on market competition. In the United States, for example, the Clayton Act prohibits any merger or acquisition that may "substantially lessen competition" or "tend to create a monopoly", and the Hart–Scott–Rodino Act requires providing advance notice to the U.S.

Boise (locally also ) is the capital and most populous city in the U.S. state of Idaho. It is the county seat of Ada County. The population of the city was 235,685 at the 2020 census. The Boise metropolitan area, located in the Treasure Valley, includes five counties of Idaho with an estimated population of 846,000, the most populous metropolitan area in Idaho and 95th-most populous in the United States. Located on the Boise River in southwestern Idaho, it is 41 miles (66 km) east of the Oregon border and 110 miles (177 km) north of the Nevada border. Downtown Boise's elevation is 2,704 feet (824 m) above sea level. Boise is home to major employers in the technology, manufacturing, and service sectors, including companies such as Micron Technology and Hewlett-Packard.

an area in Idaho and 95th-most populous in the United States. Located on the Boise River in southwestern Idaho, it is 41 miles (66 km) east of the Oregon border and 110 miles (177 km) north of the Nevada border. Downtown Boise's elevation is 2,704 feet (824 m) above sea level. Boise is home to major employers in the technology, manufacturing, and service sectors, including companies such as Micron Technology and Hewlett-Packard.

...that the military should continue killing Indians 'until the last Indian in the Territories was either on his reservation or enriched the sagebrush with his decaying carcass.' ...if the Indians refused to move there, 'they will be killed or put on the reservation by force, and certainly shot if they don't stay there.' Furthermore, the editor continues, 'The idea that the Indians have any right to the soil is ridiculous. ...They have no more rights to the soil of the Territories of the United States than wolves or coyotes...' This would be our plan of establishing friendship upon an eternal basis with our Indians: Let all the hostile bands of Idaho Territory be called in (they will not be caught in any other manner) to attend a grand treaty; plenty of blankets and nice little trinkets distributed among them; plenty of grub on hand; have a real jolly time with them; then just before the big feast put strychnine in their meat and poison to death the last mother's son of them. At the same time, native warriors around the valley, under the leadership of Howluck also known as "Bigfoot" among white settlers, among others, waged an escalating and intensified guerrilla campaign of harassment of passerby caravans along the Oregon Trail. The United States Army also escalated and intensified "punitive expeditions" against formations of warriors and against civilian communities as well. This marked the start of the "unofficial" Snake War in 1866. This war lasted until 1868, and is statistically the deadliest of the Indian Wars in the West in terms of casualties. In the end, 1,762 men were counted as the casualties of this war from both sides. In 1868, Fort Hall Indian Reservation was established in Southeastern Idaho, about 220 miles upstream, according to the terms of Fort Bridger Treaty. The Boise Valley Shoshone and Bannock Tribes were not party to this treaty. Nevertheless, in April 1869, the United States Military embarked on a campaign of "Removal, rounding up of natives in the region including in and around Boise, and expelling them with cavalry escort to Fort Hall Indian Reservation. This period is known among the Shoshone and Bannock people as Idaho's Trail of Tears. Some of the natives managed to escape, and they ran to either Duck Valley or Fort McDermitt in Nevada. Incorporation and growth Boise's early growth was significantly driven by its role in supplying the nearby gold towns that sprung up in the 1860s northeast and then southwest of the town. Miners sometimes wintered in Boise and a number of early prominent businessmen were miners who settled in town in the years after the gold rush waned. By 1864 substantial agricultural production was underway on easily irrigated lands near the river and three canal companies had been incorporated. Early transportation improvements were largely a result of toll road franchises awarded by the territorial legislature starting in the 1860s. These first ran from Fort Boise to the mining centers in the Boise Basin and east to Rocky Bar and to Rattlesnake Station where they connected to the Oregon Trail. Territorial census records from a special 1864 enumeration list the population of Boise as 1,658, and an act of December 12, 1864, was the first attempt by the Idaho Territorial Legislature to incorporate the city. This was rejected by voters the following March. Two more unsuccessful attempts were made to organize a city administration by election before the 1866 version of the city charter was approved by voters on January 6, 1868. The growing number of homes and businesses, for which owners wanted proper legal title, may have contributed to the eventual success of incorporation. All of these rejected efforts to incorporate the city came after Boise had been controversially made the state capital in 1864 over strong opposition from northern Idaho interests. This decision reflected the rapid shift of population growth from north to south after the discovery of gold in southern Idaho. By 1868 Boise had over 400 permanent buildings with a wide range of commercial services. 1868 also marked the formal beginning of a long advocacy for railroad connections to other Idaho communities and, just as importantly, to other growing cities in the west such as Portland, Oregon. Competing railroad and western state government interests frustrated these efforts for many years. Designed by Alfred B. Mullett, the U.S. Assay Office at 210 Main Street was built in 1871 and today is a National Historic Landmark. It first began accepting gold and silver for purchase on March 2, 1872, largely eliminating the need to transport ore to the mint in San Francisco. A territorial penitentiary, now known as the Old Idaho State Penitentiary, opened the same month several miles east of town. Mining continued to be important to Boise's economic growth and periodic booms contributed to population growth as well, though production of gold and silver probably peaked in the 1860s. 1882's gold and silver production of $3,500,000 declined to $1,488,315 (including lead) by 1899. Boise began to earn its City of Trees nickname in this period with a popular focus on a range of tree planting projects. Thomas J. Davis planted several thousand fruit trees in 1864 and several other early businessmen either founded nurseries or orchards of their own. In the 1870s tree planting began in earnest in downtown Boise led by prominent hotels as well as businessmen and residents. In 1907 Davis donated 43 acres of his orchard property to the city for use as a park in the name of his wife Julia. Commercial agriculture continued to expand, but was slowed by the lack of reliable rail links to regional and national markets and by a lack of large scale irrigation projects, which themselves were often tied to hoped-for railroad projects for financing. A.D. Foote, a successful mining engineer, drew up plans to irrigate up to 500,000 acres immediately south of Boise in 1882, but progress was halting and smaller farms were the norm until after the turn of the century with most located near to the river bottom where soil was productive and irrigation more easily achieved. Fruit orchards proliferated and sugar beets, still an important agricultural industry in Idaho, began to be widely cultivated in the 1890s. Cattle and sheep farming became increasingly important as the century closed. With the exception of dairy, most livestock products were exported from Idaho, unlike other agricultural products which were still largely scaled to support local markets. The timber industry also increasingly thrived in the Boise market in the 1880s and 1890s. Large quantities of timber were exported from elsewhere in Idaho, but a growing Boise supported the expansion of Alexander Rossi's sawmill, first established in 1865. Prominent early Boisean William Ridenbaugh had inherited control of the canal now bearing his name from his uncle William Morris in 1878 and later partnered with Rossi to expand the sawmill capacity under the name Rossi and Ridenbaugh Lumber Company. Their materials supported bridge building and the rapid expansion of Boise in the 1890s. As with many early infrastructure ventures, electrification succeeded only after at least one false start. July 4, 1887, marked the start of electrical transmission from a plant located on the Bench. William Ridenbaugh provided expertise and manpower for the water supply and several months were spent rigging poles and lines from the Bench to the service area across the river. Additional electrical supplies allowed the building of an electric streetcar line in 1891. This ran without interruption until buses replaced the lines in 1927, tracking—and sometimes driving—the development of Boise and nearby communities. This system expanded over several decades, reaching into the North End, South Boise and across the river on Front St. A loop line, completed in 1912, ran as far as Caldwell and Nampa, providing transport throughout the valley. Three early trolley companies merged in 1912 to form the Idaho Traction Company with a depot at 7th and Bannock Streets downtown. Additional services and urban amenities arrived in the 1890s as Boise grew. Exploratory drilling for hot water was successful in 1890 and by the end of the decade many homes along Warm Springs avenue were being heated by this source. A natatorium was built in 1892 close to the source of the hot water near the Idaho State Penitentiary. Churches serving several denominations, a Jewish synagogue, a major hardware store and department store, a Masonic hall, the Columbia Theater, Saint Alphonsus' Hospital, a number of parochial and secular schools, a City Hall and a new Union Pacific passenger station, constructed when service was finally extended to downtown, were all built during the 1890s. Falk's Department Store sponsored a semi-professional baseball team representing Boise from at least 1892 and the city supported other organized sports as they became popular.

Private equity (PE) is stock in a private company that does not offer stock to the general public. Instead, it is offered to specialized investment funds and limited partnerships that take an active role in managing and structuring the companies. In colloquial usage, "private equity" can refer to these investment firms rather than the companies in which they invest. Private-equity capital is invested into a target company either by an investment management company (private equity firm), a venture capital fund, or an angel investor; each category of investor has specific financial goals, management preferences, and investment strategies for profiting from their investments. Private equity can provide working capital to finance a target company's expansion, including the development of new products and services, operational restructuring, management changes, and shifts in ownership and control. As a financial product, a private-equity fund is private capital for financing a long-term investment strategy in an illiquid business enterprise.

Leveraged buyout (LBO) refers to a strategy of making equity investments as part of a transaction in which a company, business unit, or business asset is acquired from the current shareholders typically with the use of financial leverage. The companies involved in these transactions are typically mature and generate operating cash flows. Private-equity firms view target companies as either Platform companies, which have sufficient scale and a successful business model to act as a stand-alone entity, or as add-on / tuck-in / bolt-on acquisitions, which would include companies with insufficient scale or other deficits. Leveraged buyouts involve a financial sponsor agreeing to an acquisition without itself committing all the capital required for the acquisition. To do this, the financial sponsor will raise acquisition debt, which looks to the cash flows of the acquisition target to make interest and principal payments. Acquisition debt in an LBO is often non-recourse to the financial sponsor and has no claim on other investments managed by the financial sponsor. Therefore, an LBO transaction's financial structure is particularly attractive to a fund's limited partners, allowing them the benefits of leverage, but limiting the degree of recourse of that leverage. This kind of financing structure leverage benefits an LBO's financial sponsor in two ways: (1) the investor only needs to provide a fraction of the capital for the acquisition, and (2) the returns to the investor will be enhanced, as long as the return on assets exceeds the cost of the debt. As a percentage of the purchase price for a leverage buyout target, the amount of debt used to finance a transaction varies according to the financial condition and history of the acquisition target, market conditions, the willingness of lenders to extend credit (both to the LBO's financial sponsors and the company to be acquired) and the interest costs and the ability of the company to cover those costs. Historically the debt portion of a LBO will range from 60 to 90% of the purchase price.

"Distressed-to-Control" ("Loan-to-Own") investment whereby the investor buys debt securities in hope of acquiring ownership and control of the company's equity after financing the corporate restructuring of the target company; "Special Situations" ("Turnaround") investment wherein the investor buys debt securities and equity investments, to be used as rescue financing that will restore the profitability of the financially-weak target company. Moreover, the private-equity investment strategies of hedge funds also include actively trading the loans held and the bonds issued by the financially-weak target companies. Secondaries Secondary investments refer to investments made in existing private-equity assets. These transactions can involve the sale of private equity fund interests or portfolios of direct investments in privately held companies through the purchase of these investments from existing institutional investors. By its nature, the private-equity asset class is illiquid, intended to be a long-term investment for buy and hold investors. Secondary investments allow institutional investors, particularly those new to the asset class, to invest in private equity from older vintages than would otherwise be available to them. Secondaries also typically experience a different cash flow profile, diminishing the j-curve effect of investing in new private-equity funds. Often investments in secondaries are made through third-party fund vehicle, structured similar to a fund of funds although many large institutional investors have purchased private-equity fund interests through secondary transactions.

ion, and marketing. Developers assume significant risk in exchange for potential returns and may oversee projects ranging from residential housing to commercial and mixed-use developments. Developers acquire land, arrange financing, obtain regulatory approvals, and oversee construction or renovation. Developers usually take significant financial risks in the creation or renovation of real estate and receive the greatest rewards. Typically, developers purchase a tract of land, determine the marketing of the property, develop the building program and design, obtain the necessary public approval and financing, build the structures, and rent out, manage, and ultimately sell it. Real estate development has been criticized for contributing to urban sprawl and environmental degradation. Supporters argue that development expands housing supply, reduces housing costs, stimulates economic growth and creates jobs.

ersee construction or renovation. Developers usually take significant financial risks in the creation or renovation of real estate and receive the greatest rewards. Typically, developers purchase a tract of land, determine the marketing of the property, develop the building program and design, obtain the necessary public approval and financing, build the structures, and rent out, manage, and ultimately sell it. Real estate development has been criticized for contributing to urban sprawl and environmental degradation. Supporters argue that development expands housing supply, reduces housing costs, stimulates economic growth and creates jobs.

Some developers only handle part of the process. For example, some developers source a property and get the plans and permits approved before selling the property with the plans and permits to a builder at a premium price. Alternatively, a developer who is also a builder may purchase a property with the plans and permits in place so that they do not have the risk of failing to obtain planning approval and can start construction on the development immediately. Financial difficulties in development and investing differ because of leverage. Developers work with many different counterparts along each step of this process, including architects, city planners, engineers, surveyors, inspectors, contractors, lawyers, leasing agents, etc. In the Town and Country Planning context in the United Kingdom, “development” is defined in the Town and Country Planning Act 1990 s55. Organizing for development Development teams vary in size, bigger companies may provide all services in-house. At the other end of the spectrum, a development company might consist of one principal and a few staff who hire or contract with other companies and professionals for each service as needed. Assembling a team of professionals to address the environmental, economic, private, physical and political issues inherent in a complex development project is critical. A developer's success depends on the ability to coordinate and lead the completion of a series of interrelated activities efficiently and at the appropriate time. Development process requires skills of many professionals: architects, landscape architects, civil engineers and site planners to address project design; market consultants to determine demand and a project's economics; attorneys to handle agreements and government approvals; environmental consultants and soils engineers to analyze a site's physical limitations and environmental impacts; surveyors and title companies to provide legal descriptions of a property; and lenders to provide financing.

floor 1. When space allocated to multiple functions is significant, these buildings can be called multi-use.

Commercial property, also called commercial real estate, investment property or income property, is real estate (buildings or land) intended to generate a profit, either from capital gains or rental income. Commercial property includes office buildings, medical centers, hotels, malls, retail stores, multifamily housing buildings, farm land, warehouses, and garages. In many U.S. states, residential property containing more than a certain number of units qualifies as commercial property for borrowing and tax purposes. Commercial buildings are buildings that are used for commercial purposes, and include office buildings, warehouses, and retail buildings (e.g. convenience stores, 'big box' stores, and shopping malls). In urban locations, a commercial building may combine functions, such as offices on levels 2–10, with retail on floor 1. When space allocated to multiple functions is significant, these buildings can be called multi-use.

arm land, warehouses, and garages. In many U.S. states, residential property containing more than a certain number of units qualifies as commercial property for borrowing and tax purposes. Commercial buildings are buildings that are used for commercial purposes, and include office buildings, warehouses, and retail buildings (e.g. convenience stores, 'big box' stores, and shopping malls). In urban locations, a commercial building may combine functions, such as offices on levels 2–10, with retail on floor 1. When space allocated to multiple functions is significant, these buildings can be called multi-use.

pa ( ) is the most populous city in Canyon County, Idaho, United States. The population was 100,200 at the 2020 census. It is Idaho's third-most populous city. Nampa is about 20 miles (32 km) west of Boise along Interstate 84, and 6 miles (9.7 km) west of Meridian. It is the second principal city of the Boise metropolitan area. The name "Nampa" may have come from a Shoshoni word meaning 'moccasin' or 'footprint'. According to toponymist William O. Bright, the name comes from the Shoshoni word /nampai/, meaning "foot".

History Nampa had its beginnings in the early 1880s when the Oregon Short Line Railroad built a line from Granger, Wyoming, to Huntington, Oregon, that passed through Nampa. In Nampa there is a history museum that marks the railroad's significance. More railroad lines sprang up through Nampa, making it an important railroad town. Alexander and Hannah Duffes established one of the town's first homesteads, eventually forming the Nampa Land and Improvement Company with the help of their friend and co-founder, James McGee. Despite the name, many early settlers called the town "New Jerusalem" because of its citizens' strong religious focus. After only a year the town grew from 15 homes to 50. As amenities were added, Nampa continued to grow, and it was incorporated in 1891. Downtown Nampa's street grid is oriented with the railroad tracks, which run northwest–southeast; this was done intentionally by Alexander Duffes to prevent accidents like one that occurred earlier in a town he had platted near Toronto, where a woman and her two children were killed by a train when their buggy wheel got stuck as they crossed the tracks. As the Oregon Short Line railroad originally bypassed Boise, Nampa has the fanciest of many railroad depots built in the area. Nampa gained attention in 1889 due to a purported archaeological discovery known as the Nampa figurine. George Frederick Wright wrote up details that year for the Boston Society of Natural History. The first elementary school was built in the 1890s. Lakeview School was on a hill on 6th Street and 12th Avenue North, with a view of Lake Ethel. Just after the school's centennial celebration, it was condemned as a school and sold to the First Mennonite Church. In 2008 the building was refurbished, and it is now used by the Idaho Arts Charter School. Lake Ethel, an irrigation reservoir, had long been the site of community picnics, and many citizens fished, swam, boated, and even hunted on it and its surrounding property. But the hunting didn't last long, as O. F. Persons, owner of the adjoining homestead, took offense when local hunters started shooting his pet ducks. The city later auctioned off the lake. E. H. Dewey (a former Nampa mayor) was the only bidder. But occasional flooding led to a series of lawsuits from neighbors. Dewey eventually drained Lake Ethel. Not long after, the city council became interested in buying back the Fritz Miller property as well as the Dewey home. Pressure had been building for more than four years. Nampa citizens wanted another park. On August 7, 1924, the city council passed an ordinance to purchase the Miller property and name it Lakeview Park. A bandstand was completed in 1928, and the municipal swimming pool opened on August 13, 1934. It is Nampa's largest park and many community celebrations are held there. Colonel William H. Dewey, a man who made a fortune mining in Silver City, built the Dewey Palace Hotel in 1902 for $250,000. He died in his hotel in 1903, leaving his son $1 million. The hotel survived the great fire of 1909, which burned several blocks of downtown Nampa, but was razed in 1963 after redevelopment plans failed. Relics from the hotel such as the chandelier and the hotel safe can be found at the Canyon County Historical Museum, which is in the old train depot on Front Street and Nampa City Hall. After demolition the location on First Street between 11th and 12th Ave. South was sold to private enterprise, including a bank and tire store, replacing this building with modern structures. A public-use postage stamp sized park was later placed across the street from the old palace property as a collaboration between the Downtown Alliance of Nampa (the local business council) and an Eagle Scout Project for the Boy Scouts of America. The park includes a large mural/wall sculpture of running horses commissioned for the project. A Carnegie library was built downtown in 1908; it burned down after the library moved in 1966. Nampa Public Library was then on the corner of 1st Street and 11th Avenue South in the old bank building. A new library, on 12th Avenue South, opened in 2015. Deer Flat Reservoir, an offstream irrigation storage reservoir, was constructed by the United States Bureau of Reclamation between 1906 and 1911. Known locally as Lake Lowell, it is surrounded by the Deer Flat National Wildlife Refuge, established in 1909 by President Theodore Roosevelt. The refuge is administered by the U.S. Fish and Wildlife Service. Lake Lowell is filled by the concrete New York Canal; the water is diverted from the Boise River a few miles below Lucky Peak Dam. In 1910, the Idaho State School and Hospital was built northwest of Nampa for the state's developmentally challenged population. It opened in 1918. The institution was largely self-sufficient, with a large farm staffed by the residents. The higher-functioning residents also cared for residents who could not care for themselves. The land for the farm was sold and is now golf courses (Centennial and Ridgecrest), and the residents no longer give primary care to other residents. The institution is modernized and remains in operation, though a few of the oldest buildings now house juvenile offenders. Nampa held an annual harvest festival and farmers' market from about 1908, a time of celebration and community fun. From this festival emerged the Snake River Stampede Rodeo in 1937, which continues to this day. It is one of the top 12 rodeos in the pro rodeo circuits. In 1913, a local congregation of the Church of the Nazarene built a small elementary school, which became to Northwest Nazarene College in 1915 and finally Northwest Nazarene University. As of 2025, the university has approximately 1,800 undergraduate and graduate students. Karcher Mall opened in 1965, the first enclosed shopping mall in the Treasure Valley. It was "the place to gather" for several decades until the Boise Towne Square mall was built in Boise in 1988, drawing business away. Karcher Mall was renamed District 208 in 2022. The Idaho Press-Tribune is the local newspaper for the Canyon County area.

Idaho Hispanic Community Center (IH2C) In 2003, the Hispanic Cultural Center of Idaho (HCCI) opened thanks to community support. It has recently transitioned back to the City of Nampa and was renamed the Idaho Hispanic Community Center (IH2C) and is home to the Idaho Hispanic Foundation. It hosts events, classes, and festivals, including Día de los Muertos, Hispanic Heritage Month, and Día Internacional de la Mujer. It serves as a meeting place for associations and groups. Displays of cultural history are available to the public. Nampa Train Depot Museum The Nampa Train Depot Museum is a historical depot with displays and archives of the area's railroad and cultural history. The Canyon County Historical Society saved the depot from demolition in 1972. Annual Festival of the Arts Nampa's Festival of the Arts, which began in 1987, is held in Lakeview Park every year and includes local art, music, dance, and food.

Ada County is located in the southwestern part of Idaho, United States. As of the 2020 census, the county had a population of 494,967, which by 2025 was estimated to have risen to 546,141. Ada County is by far the state's most populous county; it is home to 26.8% of the state's population. The county seat and largest city is Boise, which is also the state capital. Ada County is included in the Boise metropolitan area. The Ada County Highway District has jurisdiction over all the local county and city streets, except for private roads and state roads.

populous county; it is home to 26.8% of the state's population. The county seat and largest city is Boise, which is also the state capital. Ada County is included in the Boise metropolitan area. The Ada County Highway District has jurisdiction over all the local county and city streets, except for private roads and state roads.

ea. The Ada County Highway District has jurisdiction over all the local county and city streets, except for private roads and state roads. In the interior Pacific Northwest east of the Cascade Range, Ada County ranks second in population, behind Spokane County, Washington. History Ada County was created by the Idaho Territory legislature on December 22, 1864, partitioned from Boise County. It is named for Ada Riggs, the daughter of H. C. Riggs, a member of the legislature; he established the county and was a co-founder of Boise.

Star is a city in northwestern Ada County, Idaho, with parts stretching into neighboring Canyon County. The population was 11,117 at the 2020 census, up from 5,793 in 2010. It was named in the 19th century by travelers on their way to Middleton and Boise who used the star on the school house to find east and west. The name stuck and it became Star, Idaho.

on the school house to find east and west. The name stuck and it became Star, Idaho. Today, it is a rapidly growing suburb of Boise and its schools are shared with Middleton School District and West Ada School District. Star is part of the Boise metropolitan area. Geography Star is located at 43°41′39″N 116°29′25″W (43.694084, -116.490225), at an elevation of 2,470 feet (753 m) above sea level.

2000 census As of the census of 2000, there were 1,795 people in 631 households, including 485 families, in the city. The population density was 2,092.5 inhabitants per square mile (807.9/km2). There were 681 housing units at an average density of 793.9 per square mile (306.5/km2). The racial makeup of the city was 92.87% White, 0.28% African American, 0.95% Native American, 0.22% Asian, 0.06% Pacific Islander, 0.89% from other races, and 4.74% from two or more races. Hispanic or Latino of any race were 4.29%. Of the 631 households 48.0% had children under the age of 18 living with them, 60.2% were married couples living together, 11.7% had a female householder with no husband present, and 23.1% were non-families. 16.8% of households were one person and 4.1% were one person aged 65 or older. The average household size was 2.82 and the average family size was 3.19. The age distribution was 33.2% under the age of 18, 9.9% from 18 to 24, 36.4% from 25 to 44, 14.8% from 45 to 64, and 5.7% 65 or older. The median age was 28 years. For every 100 females, there were 97.0 males. For every 100 females age 18 and over, there were 92.8 males. The median household income was $42,337 and the median family income was $46,458. Males had a median income of $31,028 versus $22,625 for females. The per capita income for the city was $15,864. About 5.4% of families and 8.5% of the population were below the poverty line, including 10.7% of those under age 18 and 13.6% of those age 65 or over. Education All of Star in Ada County is in the West Ada School District (Meridian Joint School District 2).

nciples of soil mechanics and rock mechanics to solve its engineering problems. It also relies on knowledge of geology, hydrology, geophysics, and other related sciences. Geotechnical engineering has applications in military engineering, mining engineering, petroleum engineering, coastal engineering, and offshore construction. The fields of geotechnical engineering and engineering geology have overlapping knowledge areas.

Geosynthetics are a type of plastic polymer products used in geotechnical engineering that improve engineering performance while reducing costs. This includes geotextiles, geogrids, geomembranes, geocells, and geocomposites. The synthetic nature of the products make them suitable for use in the ground where high levels of durability are required. Their main functions include drainage, filtration, reinforcement, separation, and containment. Geosynthetics are available in a wide range of forms and materials, each to suit a slightly different end-use, although they are frequently used together. Some reinforcement geosynthetics, such as geogrids and more recently, cellular confinement systems, have shown to improve bearing capacity, modulus factors and soil stiffness and strength.

History Humans have historically used soil as a material for flood control, irrigation purposes, burial sites, building foundations, and construction materials for buildings. Dykes, dams, and canals dating back to at least 2000 BCE—found in parts of ancient Egypt, ancient Mesopotamia, the Fertile Crescent, and the early settlements of Mohenjo Daro and Harappa in the Indus valley—provide evidence for early activities linked to irrigation and flood control. As cities expanded, structures were erected and supported by formalized foundations. The ancient Greeks notably constructed pad footings and strip-and-raft foundations. Until the 18th century, however, no theoretical basis for soil design had been developed, and the discipline was more of an art than a science, relying on experience. Several foundation-related engineering problems, such as the Leaning Tower of Pisa, prompted scientists to begin taking a more scientific-based approach to examining the subsurface. The earliest advances occurred in the development of earth pressure theories for the construction of retaining walls. Henri Gautier, a French royal engineer, recognized the "natural slope" of different soils in 1717, an idea later known as the soil's angle of repose. Around the same time, a rudimentary soil classification system was also developed based on a material's unit weight, which is no longer considered a good indication of soil type. The application of the principles of mechanics to soils was documented as early as 1773 when Charles Coulomb, a physicist and engineer, developed improved methods to determine the earth pressures against military ramparts. Coulomb observed that, at failure, a distinct slip plane would form behind a sliding retaining wall and suggested that the maximum shear stress on the slip plane, for design purposes, was the sum of the soil cohesion, c {\displaystyle c} , and friction σ {\displaystyle \sigma \,\!} tan ⁡ ( ϕ ) {\displaystyle \tan(\phi \,\!)} , where σ {\displaystyle \sigma \,\!} is the normal stress on the slip plane and ϕ {\displaystyle \phi \,\!} is the friction angle of the soil. By combining Coulomb's theory with Christian Otto Mohr's 2D stress state, the theory became known as Mohr-Coulomb theory. Although it is now recognized that precise determination of cohesion is impossible because c {\displaystyle c} is not a fundamental soil property, the Mohr-Coulomb theory is still used in practice today. In the 19th century, Henry Darcy developed what is now known as Darcy's law, describing the flow of fluids in a porous media. Joseph Boussinesq, a mathematician and physicist, developed theories of stress distribution in elastic solids that proved useful for estimating stresses at depth in the ground. William Rankine, an engineer and physicist, developed an alternative to Coulomb's earth pressure theory. Albert Atterberg developed the clay consistency indices that are still used today for soil classification. In 1885, Osborne Reynolds recognized that shearing causes volumetric dilation of dense materials and contraction of loose granular materials. Modern geotechnical engineering is said to have begun in 1925 with the publication of Erdbaumechanik by Karl von Terzaghi, a mechanical engineer and geologist. Considered by many to be the father of modern soil mechanics and geotechnical engineering, Terzaghi developed the principle of effective stress, and demonstrated that the shear strength of soil is controlled by effective stress. Terzaghi also developed the framework for theories of bearing capacity of foundations, and the theory for prediction of the rate of settlement of clay layers due to consolidation. Afterwards, Maurice Biot fully developed the three-dimensional soil consolidation theory, extending the one-dimensional model previously developed by Terzaghi to more general hypotheses and introducing the set of basic equations of Poroelasticity. In his 1948 book, Donald Taylor recognized that the interlocking and dilation of densely packed particles contributed to the peak strength of the soil. Roscoe, Schofield, and Wroth, with the publication of On the Yielding of Soils in 1958, established the interrelationships between the volume change behavior (dilation, contraction, and consolidation) and shearing behavior with the theory of plasticity using critical state soil mechanics.

Garden City is a city in Ada County, Idaho. The population was 12,316 at the time of the 2020 census. Garden City is nearly surrounded by Boise but retains a separate municipal government. Garden City was named for gardens raised by Chinese immigrants who lived in the area.

Geography According to the United States Census Bureau, the city has a total area of 4.17 square miles (10.80 km2), of which 4.04 square miles (10.46 km2) is land and 0.13 square miles (0.34 km2) is water. Expo Idaho, which hosts the Western Idaho Fair, is part of unincorporated Ada County but the city limits completely surround the complex. In 2017, Mayor John Evans proposed that Garden City annex the enclave in order to develop a downtown area. Demographics 2020 census As of the 2020 census, Garden City had a population of 12,316. The median age was 47.0 years. 16.9% of residents were under the age of 18 and 26.4% of residents were 65 years of age or older. For every 100 females there were 92.1 males, and for every 100 females age 18 and over there were 90.5 males age 18 and over. 100.0% of residents lived in urban areas, while 0.0% lived in rural areas. There were 5,585 households in Garden City, of which 21.4% had children under the age of 18 living in them. Of all households, 40.2% were married-couple households, 21.5% were households with a male householder and no spouse or partner present, and 30.1% were households with a female householder and no spouse or partner present. About 33.1% of all households were made up of individuals and 16.8% had someone living alone who was 65 years of age or older. There were 5,927 housing units, of which 5.8% were vacant.

2000 census At the 2000 census there were 10,624 people, 4,331 households, and 2,784 families living in the city. The population density was 2,559.9 per square mile. There were 4,590 housing units at an average density of 1,106.0 per square mile. The racial makeup of the city was 89.3% White, 0.5% African American, 0.9% Native American, 1.4% Asian, 0.1% Pacific Islander, 4.9% from other races, and 2.9% from two or more races. Hispanic or Latino of any race were 9.6%. Of the 4,331 households 29.8% had children under the age of 18 living with them, 47.7% were married couples living together, 10.9% had a female householder with no husband present, and 35.7% were non-families. 27% of households were one person and 8.3% were one person aged 65 or older. The average household size was 2.43 and the average family size was 2.91. The age distribution was 24.3% under the age of 18, 10.8% from 18 to 24, 29.9% from 25 to 44, 22.6% from 45 to 64, and 12.5% 65 or older. The median age was 35 years. For every 100 females, there were 103.1 males. For every 100 females age 18 and over, there were 101.3 males. The median household income was $38,520 and the median family income was $46,463. Males had a median income of $30,499 versus $28,315 for females. The per capita income for the city was $24,242. About 9.8% of families and 12.7% of the population were below the poverty line, including 16.6% of those under age 18 and 4.0% of those age 65 or over. Education Most of Garden City is in Boise School District.

Meridian is a city located in Ada County, Idaho, United States. The population was 117,635 at the 2020 census, making it the second most populous city in the county and Idaho, after Boise, the state capital.

Rail transportation (1908–28) Following the raising of $4,000 to lay the Interurban rail line from Onweiler (Meridian and Ustick Roads), the tracks were completed into the village center. Turning east on Broadway and ending at East Second, the last car would spend the night in Meridian before returning to Boise early the next morning with passengers and freight. The interurban Station and Generator building (west one-third of the old library at Meridian and Idaho Streets) was built in 1912, and the line continued on to Nampa via Meridian. The tracks down Broadway were not used after 1912. The Interurban Company entered into receivership and closed in 1928 after 20 years of providing continuous transportation to neighboring towns. It was Meridian's main connection to the area outside the local community. The Union Pacific Railroad spur opened in 1900 and is currently operated by the Boise Valley Railroad. Many industrial customers continue to ship forest, agricultural, and chemical products along this corridor. Creamery (1929–70) The city's official website describes the history of the Ada County Dairymen's cooperative creamery as follows:The lowest days of the Great Depression brightened for area dairymen when the Ada County Dairymen's cooperative creamery began operation in 1929. It provided milk checks to those who were members of the cooperative, enabling them to pay their taxes and provide food for their families. Other community members hauled milk to the creamery and were employed by the creamery, whose product was Challenge Butter. The creamery ran seven days a week for 40 years. Additions and improvements were made while the plant was in full operation. Later years saw the Wyeth Laboratories affiliate with the creamery to manufacture SMA baby formula.

Creamery (1929–70) The city's official website describes the history of the Ada County Dairymen's cooperative creamery as follows:The lowest days of the Great Depression brightened for area dairymen when the Ada County Dairymen's cooperative creamery began operation in 1929. It provided milk checks to those who were members of the cooperative, enabling them to pay their taxes and provide food for their families. Other community members hauled milk to the creamery and were employed by the creamery, whose product was Challenge Butter. The creamery ran seven days a week for 40 years. Additions and improvements were made while the plant was in full operation. Later years saw the Wyeth Laboratories affiliate with the creamery to manufacture SMA baby formula.

city in Idaho. As of the 2020 census, Caldwell had a population of 59,996. Caldwell is considered part of the Boise metropolitan area, and is the location of the College of Idaho. The city is located approximately 24 miles (39 km) west of Boise, and approximately 17 miles (27 km) east of the Oregon border. History The present-day location of Caldwell is along a natural passageway to the Inland and Pacific Northwest. Native American tribes from the west coast, north Idaho and as far away as Colorado came to the banks of the Boise River for annual trading fairs, or rendezvous. European and some Hawaiian explorers and traders soon followed the paths left by Native Americans and hopeful emigrants later forged the Oregon Trail and followed those paths to seek a better life in the Oregon Territory. Pioneers of the Trail traveled along the Boise River to Canyon Hill and forded the river close to the Silver Bridge on Plymouth Street. During the Civil War, the discovery of gold in Idaho's mountains brought a variety of new settlers into the area. Many never made it to the mines but settled along the Boise River and run ferries, stage stations, and freighting businesses. These early entrepreneurs created small ranches and farms in the river valleys. Caldwell's inception occurred largely as a result of the construction of the Oregon Short Line Railroad, which connected Wyoming to Oregon through Idaho. Robert E. Strahorn came to the Boise River Valley in 1883 to select a route for the railroad. He rejected the grade into Boise City as too steep and chose a site 30 miles to the west. He drove a stake into an alkali flat of sagebrush and greasewood and the City of Caldwell was platted. Caldwell was named after one of Strahorn's business partners, Alexander Caldwell, a former senator from Kansas. When Caldwell was platted in August 1883, its founder, the Idaho and Oregon Land Improvement Company, started persuading settlers and businessmen to move to the area. Within four months, Caldwell had 600 residents living in 150 dwellings, 40 businesses, a school, a telephone exchange, and two newspapers. On January 15, 1890, the Board of Commissioners of Ada County issued a handwritten order incorporating the City of Caldwell. The College of Idaho was founded in Caldwell in 1891. In 1892, Canyon County was established from a portion of Ada County, and Caldwell was named the county seat. Irrigation canals and waterways were constructed throughout Canyon County, providing the foundation for an agricultural economy. The Oregon Short Line Railroad became part of the larger Union Pacific Railroad network and in 1906 the Caldwell freight and passenger depot was constructed. Caldwell experienced moderate growth as an agricultural processing, commercial retail and educational center during the 20th century. In 2009, the City of Caldwell completed a revitalization project to restore Indian Creek, which runs through downtown Caldwell, but had been used for sewage disposal by local industries and been covered over.

History The present-day location of Caldwell is along a natural passageway to the Inland and Pacific Northwest. Native American tribes from the west coast, north Idaho and as far away as Colorado came to the banks of the Boise River for annual trading fairs, or rendezvous. European and some Hawaiian explorers and traders soon followed the paths left by Native Americans and hopeful emigrants later forged the Oregon Trail and followed those paths to seek a better life in the Oregon Territory. Pioneers of the Trail traveled along the Boise River to Canyon Hill and forded the river close to the Silver Bridge on Plymouth Street. During the Civil War, the discovery of gold in Idaho's mountains brought a variety of new settlers into the area. Many never made it to the mines but settled along the Boise River and run ferries, stage stations, and freighting businesses. These early entrepreneurs created small ranches and farms in the river valleys. Caldwell's inception occurred largely as a result of the construction of the Oregon Short Line Railroad, which connected Wyoming to Oregon through Idaho. Robert E. Strahorn came to the Boise River Valley in 1883 to select a route for the railroad. He rejected the grade into Boise City as too steep and chose a site 30 miles to the west. He drove a stake into an alkali flat of sagebrush and greasewood and the City of Caldwell was platted. Caldwell was named after one of Strahorn's business partners, Alexander Caldwell, a former senator from Kansas. When Caldwell was platted in August 1883, its founder, the Idaho and Oregon Land Improvement Company, started persuading settlers and businessmen to move to the area. Within four months, Caldwell had 600 residents living in 150 dwellings, 40 businesses, a school, a telephone exchange, and two newspapers. On January 15, 1890, the Board of Commissioners of Ada County issued a handwritten order incorporating the City of Caldwell. The College of Idaho was founded in Caldwell in 1891. In 1892, Canyon County was established from a portion of Ada County, and Caldwell was named the county seat. Irrigation canals and waterways were constructed throughout Canyon County, providing the foundation for an agricultural economy. The Oregon Short Line Railroad became part of the larger Union Pacific Railroad network and in 1906 the Caldwell freight and passenger depot was constructed. Caldwell experienced moderate growth as an agricultural processing, commercial retail and educational center during the 20th century. In 2009, the City of Caldwell completed a revitalization project to restore Indian Creek, which runs through downtown Caldwell, but had been used for sewage disposal by local industries and been covered over.

location of the College of Idaho. The city is located approximately 24 miles (39 km) west of Boise, and approximately 17 miles (27 km) east of the Oregon border. History The present-day location of Caldwell is along a natural passageway to the Inland and Pacific Northwest. Native American tribes from the west coast, north Idaho and as far away as Colorado came to the banks of the Boise River for annual trading fairs, or rendezvous. European and some Hawaiian explorers and traders soon followed the paths left by Native Americans and hopeful emigrants later forged the Oregon Trail and followed those paths to seek a better life in the Oregon Territory. Pioneers of the Trail traveled along the Boise River to Canyon Hill and forded the river close to the Silver Bridge on Plymouth Street. During the Civil War, the discovery of gold in Idaho's mountains brought a variety of new settlers into the area. Many never made it to the mines but settled along the Boise River and run ferries, stage stations, and freighting businesses. These early entrepreneurs created small ranches and farms in the river valleys. Caldwell's inception occurred largely as a result of the construction of the Oregon Short Line Railroad, which connected Wyoming to Oregon through Idaho. Robert E. Strahorn came to the Boise River Valley in 1883 to select a route for the railroad. He rejected the grade into Boise City as too steep and chose a site 30 miles to the west. He drove a stake into an alkali flat of sagebrush and greasewood and the City of Caldwell was platted. Caldwell was named after one of Strahorn's business partners, Alexander Caldwell, a former senator from Kansas. When Caldwell was platted in August 1883, its founder, the Idaho and Oregon Land Improvement Company, started persuading settlers and businessmen to move to the area. Within four months, Caldwell had 600 residents living in 150 dwellings, 40 businesses, a school, a telephone exchange, and two newspapers. On January 15, 1890, the Board of Commissioners of Ada County issued a handwritten order incorporating the City of Caldwell. The College of Idaho was founded in Caldwell in 1891. In 1892, Canyon County was established from a portion of Ada County, and Caldwell was named the county seat. Irrigation canals and waterways were constructed throughout Canyon County, providing the foundation for an agricultural economy. The Oregon Short Line Railroad became part of the larger Union Pacific Railroad network and in 1906 the Caldwell freight and passenger depot was constructed. Caldwell experienced moderate growth as an agricultural processing, commercial retail and educational center during the 20th century. In 2009, the City of Caldwell completed a revitalization project to restore Indian Creek, which runs through downtown Caldwell, but had been used for sewage disposal by local industries and been covered over.

Kuna ( KYOO-nə) is a city in Ada County, Idaho. It is part of the Boise metropolitan area. The population was 24,011 at the time of the 2020 census. Kuna is one of the fastest-growing areas in Idaho, having nearly tripled in population between 2000 and 2010 and a nearly additional 60 percent gain between 2010 and 2020.

History Kuna originated as a railroad stop with coach transport to Boise. It is popularly believed, as cited by the Kuna Chamber of Commerce, that the translation of the name "Kuna" means "the end of the trail", but Charles S. Walgamott cites the origin of the name as a Shoshone Indian word meaning "green leaf, good to smoke." The Western Heritage Historic Byway, designated as a national as well as a state scenic byway, travels around a number of historic sites in the area. Geography Kuna's business center is approximately 18 miles (29 km) southwest of downtown Boise, the state capital. According to the United States Census Bureau, the city has a total area of 18.18 square miles (47.09 km2), of which 18.08 square miles (46.83 km2) is land and 0.10 square miles (0.26 km2) is water. South of Kuna is the Kuna Caves, a lava tube. A small seasonal creek, Indian Creek, runs through the city. It is now used as an irrigation canal, filled by the New York Canal from the Boise River Diversion Dam.

Geography Kuna's business center is approximately 18 miles (29 km) southwest of downtown Boise, the state capital. According to the United States Census Bureau, the city has a total area of 18.18 square miles (47.09 km2), of which 18.08 square miles (46.83 km2) is land and 0.10 square miles (0.26 km2) is water. South of Kuna is the Kuna Caves, a lava tube. A small seasonal creek, Indian Creek, runs through the city. It is now used as an irrigation canal, filled by the New York Canal from the Boise River Diversion Dam. One of the few small floatable waterways in the region, Indian Creek is a favorite swimming spot for local residents. Demographics 2020 census As of the 2020 census, Kuna had a population of 24,011. The median age was 30.9 years. 31.8% of residents were under the age of 18 and 8.1% of residents were 65 years of age or older. For every 100 females there were 97.8 males, and for every 100 females age 18 and over there were 96.2 males age 18 and over. 97.1% of residents lived in urban areas, while 2.9% lived in rural areas. There were 7,736 households in Kuna, of which 48.2% had children under the age of 18 living in them. Of all households, 62.3% were married-couple households, 11.6% were households with a male householder and no spouse or partner present, and 17.4% were households with a female householder and no spouse or partner present. About 13.9% of all households were made up of individuals and 4.6% had someone living alone who was 65 years of age or older. There were 7,948 housing units, of which 2.7% were vacant. The homeowner vacancy rate was 0.8% and the rental vacancy rate was 5.9%. As of the 2020 census, the median income for a household in the city was $68,017. Families had a median income of $75,296 versus $91,364 for married-couple families and $33,512 for nonfamily households.

Eagle is a city in Ada County, Idaho, ten miles (16 km) northwest of downtown Boise. The population was 30,346 at the 2020 census. History 19th century Eagle Island in Idaho was settled in 1863 by Truman Coe Catlin, who later shifted from crop farming to dairy farming, starting the island's dairy tradition. He also pioneered irrigation in the area by constructing a wide irrigation ditch. The most notable early community developer was Thomas Hugh Aiken, a Canadian surveyor, who helped establish the Eagle community in the 1870s.

Parks and recreation The city features numerous parks, including Arboretum Park, Friendship Park, Heritage Park, Orval Krasen Park, Reid W. Merrill Sr. Community Park, and Stephen C. Guerber Park, among others. The Parks and Recreation department offers youth sports leagues, camps, special events (such as Eagle Fun Days), and maintains extensive trails. Nearby Eagle Island State Park provides a swimming beach, trails, disc golf, and winter sports. Education Most of Eagle is in the West Ada School District, with a small portion in the Boise School District.

20th century The Eagle Fish Hatchery, established in the late 1940s in Idaho, was originally part of a trout program until the 1980s. In 1991, it was restructured to support the conservation of Snake River sockeye salmon, an endangered species listed that year. The hatchery's mission shifted to preserving the species and its genetic diversity through the development of eight broodstocks derived from smolts, anadromous adults, and residual populations.

he plain is a wide, flat bow-shaped depression and covers about a quarter of Idaho. Three major volcanic buttes dot the plain east of Arco, the largest being Big Southern Butte. Most of Idaho's major cities are in the Snake River Plain, as is much of its agricultural land. Geology The Snake River Plain can be divided into three sections: western, central, and eastern. The western Snake River Plain is a large tectonic graben or rift valley filled with several kilometers of Lake Idaho sediments; the sediments are underlain by rhyolite and basalt, and overlain by basalt. The western plain began to form around 11–12 Ma (million years ago) with the eruption of rhyolite lavas and ignimbrites. The western plain is not parallel to North American Plate motion and lies at a high angle to the central and eastern Snake River Plain.

The Snake River Plain is a geologic feature located primarily within the U.S. state of Idaho. It stretches about 400 miles (640 km) westward from northwest of the state of Wyoming to the Idaho-Oregon border. The plain is a wide, flat bow-shaped depression and covers about a quarter of Idaho.

The Snake River Plain can be divided into three sections: western, central, and eastern. The western Snake River Plain is a large tectonic graben or rift valley filled with several kilometers of Lake Idaho sediments; the sediments are underlain by rhyolite and basalt, and overlain by basalt. The western plain began to form around 11–12 Ma (million years ago) with the eruption of rhyolite lavas and ignimbrites. The western plain is not parallel to North American Plate motion and lies at a high angle to the central and eastern Snake River Plain.