Beauty Salon ↔ relates to ↔ Wedding Events

nails, hands, arms, feet, and legs; contraindications that may arise, identifying diseases and disorders, proper sanitation and sterilizing techniques, how to perform nail services safely, gel polish application, liquid and powder enhancements and hard gel enhancements. The work itself tends to take place in a beauty salon, although some nail stylists will make house calls to clients. Once licensed, many nail stylists will keep their own regular client list. The basic equipment needed to carry out nail services can be easily obtained. Types of basic equipment can include nail drills, brushes, gel polish, and a UV lamp.

t needed to carry out nail services can be easily obtained. Types of basic equipment can include nail drills, brushes, gel polish, and a UV lamp. Specialist equipment will be needed for specific nail applications. Occupational hazards Chemical exposures In the United States there are approximately 400,000 nail technicians registered and occupational exposures to chemical hazards is recognized as a concern in this profession. The significant health impacts of these chemicals are marginalized as a majority of this workforce is women of reproductive age. These nail salons use a wide variety of supplies that have high levels of acrylates, parabens, phthalates and volatile organic compounds (VOCs). It has been found that these chemical exposures can be linked to respiratory, reproductive, and neurological health issues and most of these supplies are carcinogenic. Additionally, the exposure of the endocrine disruptors in phthalates found in nail products is of note. A study of Canadian nail salons proved that these phthalates are aerosolized and causing chronic health effects. The VOCs are an added concern for nail technicians. A study in 2019 was one of the first of its kind to measure biomarkers for VOCs in nail technicians pre and post shift. It was found that toluene levels were significantly higher in workers blood post shift. Consistent exposure to toluene can cause severe damage to the central nervous system, with symptoms like motor dysfunction and limb paralysis. It is necessary that education be spread on their hazards and more research should be done in order for effective personal protective equipment to be chosen upon. These education measures are necessary and critical to ensure the health and safety of workers. With a majority of these workers being young women of color it is additionally important that recognition of the severity of the damage these chemical exposures cause to avoid further marginalization of this community. The increased risk of those who are pregnant furthers the need for workplace safety in nail salons. The Occupational Safety and Health Administration (OSHA) has provided guidelines on ways to mitigate the impact of these harsh chemical exposures.

sanitation and sterilizing techniques, how to perform nail services safely, gel polish application, liquid and powder enhancements and hard gel enhancements. The work itself tends to take place in a beauty salon, although some nail stylists will make house calls to clients. Once licensed, many nail stylists will keep their own regular client list. The basic equipment needed to carry out nail services can be easily obtained. Types of basic equipment can include nail drills, brushes, gel polish, and a UV lamp.

Cosmetology (from Greek κοσμητικός, kosmētikos, "beautifying"; and -λογία, -logia, "study of") is the study and application of beauty treatment.

Cosmetologists are trained and licensed to perform cosmetic treatments to the hair, skin, and nails. This can be expanded into multiple parts including cutting and chemically treating hair, chemical hair removal, fashion trends, wigs, nails and skin care, skin and hair analysis; relaxation techniques including head, neck, scalp, hand and feet basic massage and aroma therapies; plus ability to expertly apply makeup applications to cover up dark spots or promote and can expand into further specialties such as reflexology; theatrical applications; cosmetics and others as listed below. Hair color specialist A hair color specialist, or hair colorist, specializes in the modification of natural hair color utilizing various application methods while using a colorant product from a professional company. In the US, some colorists are qualified through the American Board of Certified Hair Colorists. This designation is used to recognize colorists that have a greater level of competency in the industry through a written exam and a practical exam. A hair color specialist's duties might include, but are not limited to, basic color applications, like covering grey, and lightening or darkening natural hair color.

Hair color specialist A hair color specialist, or hair colorist, specializes in the modification of natural hair color utilizing various application methods while using a colorant product from a professional company. In the US, some colorists are qualified through the American Board of Certified Hair Colorists. This designation is used to recognize colorists that have a greater level of competency in the industry through a written exam and a practical exam. A hair color specialist's duties might include, but are not limited to, basic color applications, like covering grey, and lightening or darkening natural hair color.

Photography is the art, application, and practice of creating images by recording light, either electronically by means of an image sensor, or chemically by means of a light-sensitive material such as photographic film. It is employed in many fields of science, manufacturing (e.g., photolithography), and business, as well as its more direct uses for art, film and video production, recreational purposes, hobby, and mass communication. A person who operates a camera to capture or take photographs is called a photographer, while the captured image, also known as a photograph, is the result produced by the camera. Typically, a lens is used to focus the light reflected or emitted from objects into a real image on the light-sensitive surface inside a camera during a timed exposure. With an electronic image sensor, this produces an electrical charge at each pixel, which is electronically processed and stored in a digital image file for subsequent display or processing. The result with photographic emulsion is an invisible latent image, which is later chemically "developed" into a visible image, either negative or positive, depending on the purpose of the photographic material and the method of processing. A negative image on film is traditionally used to photographically create a positive image on a paper base, known as a print, either by using an enlarger or by contact printing. Before the emergence of digital photography, photographs that utilized film had to be developed to produce negatives or projectable slides, and negatives had to be printed as positive images, usually in enlarged form.

In the March 1851 issue of The Chemist, Frederick Scott Archer published his wet plate collodion process. It became the most widely used photographic medium until the gelatin dry plate, introduced in the 1870s, eventually replaced it. There are three subsets to the collodion process; the Ambrotype (a positive image on glass), the Ferrotype or Tintype (a positive image on metal) and the glass negative, which was used to make positive prints on albumen or salted paper. Many advances in photographic glass plates and printing were made during the rest of the 19th century. In 1891, Gabriel Lippmann introduced a process for making natural-color photographs based on the optical phenomenon of the interference of light waves. His scientifically elegant and important but ultimately impractical invention earned him the Nobel Prize in Physics in 1908. Glass plates were the medium for most original camera photography from the late 1850s until the general introduction of flexible plastic films during the 1890s. Although the convenience of the film greatly popularized amateur photography, early films were somewhat more expensive and of markedly lower optical quality than their glass plate equivalents, and until the late 1910s they were not available in the large formats preferred by most professional photographers, so the new medium did not immediately or completely replace the old. Because of the superior dimensional stability of glass, the use of plates for some scientific applications, such as astrophotography, continued into the 1990s, and in the niche field of laser holography, it has persisted into the 21st century. Film Hurter and Driffield began pioneering work on the light sensitivity of photographic emulsions in 1876. Their work enabled the first quantitative measure of film speed to be devised. The first flexible photographic roll film was marketed by George Eastman, founder of Kodak in 1885, but this original "film" was actually a coating on a paper base. As part of the processing, the image-bearing layer was stripped from the paper and transferred to a hardened gelatin support. The first transparent plastic roll film followed in 1889. It was made from highly flammable nitrocellulose known as nitrate film. Although cellulose acetate or "safety film" had been introduced by Kodak in 1908, at first it found only a few special applications as an alternative to the hazardous nitrate film, which had the advantages of being considerably tougher, slightly more transparent, and cheaper. The changeover was not completed for X-ray films until 1933, and although safety film was always used for 16 mm and 8 mm home movies, nitrate film remained standard for theatrical 35 mm motion pictures until it was finally discontinued in 1951. Films remained the dominant form of photography until the early 21st century when advances in digital photography drew consumers to digital formats. Although modern photography is dominated by digital users, film continues to be used by enthusiasts and professional photographers. The distinctive "look" of film based photographs compared to digital images is likely due to a combination of factors, including (1) differences in spectral and tonal sensitivity (S-shaped density-to-exposure (H&D curve) with film vs.

Hurter and Driffield began pioneering work on the light sensitivity of photographic emulsions in 1876. Their work enabled the first quantitative measure of film speed to be devised. The first flexible photographic roll film was marketed by George Eastman, founder of Kodak in 1885, but this original "film" was actually a coating on a paper base. As part of the processing, the image-bearing layer was stripped from the paper and transferred to a hardened gelatin support. The first transparent plastic roll film followed in 1889. It was made from highly flammable nitrocellulose known as nitrate film. Although cellulose acetate or "safety film" had been introduced by Kodak in 1908, at first it found only a few special applications as an alternative to the hazardous nitrate film, which had the advantages of being considerably tougher, slightly more transparent, and cheaper. The changeover was not completed for X-ray films until 1933, and although safety film was always used for 16 mm and 8 mm home movies, nitrate film remained standard for theatrical 35 mm motion pictures until it was finally discontinued in 1951. Films remained the dominant form of photography until the early 21st century when advances in digital photography drew consumers to digital formats. Although modern photography is dominated by digital users, film continues to be used by enthusiasts and professional photographers. The distinctive "look" of film based photographs compared to digital images is likely due to a combination of factors, including (1) differences in spectral and tonal sensitivity (S-shaped density-to-exposure (H&D curve) with film vs.

andfills, incinerators, or recycling centers. In lower-income countries, practices vary, but a sizable portion of waste is stored in open dumps or openly burned, in addition to more sanitary methods. According to one estimate of global waste, approximately a fourth of all the municipal solid terrestrial waste is not collected, and an additional fourth is mismanaged after collection, often being burned in open and uncontrolled fires – or close to one billion tons per year when combined. Waste itself and poor waste management methods can pose human health harm and environmental harm by polluting air, water, soil, and food. The aim of waste management is to reduce the adverse effects of waste on human health, the environment, planetary resources, and aesthetics. Waste management deals with all types of waste (whether solid, liquid, or gases), including industrial, chemical, municipal, organic, biomedical, and radioactive wastes. A large portion of waste management practices deal with municipal solid waste (MSW), which is the bulk of the waste that is created by household, industrial, and commercial activity. According to the Intergovernmental Panel on Climate Change (IPCC), municipal solid waste is expected to reach approximately 3.4 Gt by 2050; however, policies and lawmaking can reduce the amount of waste produced in different areas and cities of the world. Effective 'Waste Management' involves the practice of '7R' - 'R'efuse, 'R'educe', 'R'euse, 'R'epair, 'R'epurpose, 'R'ecycle and 'R'ecover. Amongst these '7R's, the first two ('Refuse' and 'Reduce') relate to the non-creation of waste, such as reducing consumption. The next two ('Reuse' and 'Repair') refer to increasing the usage of the existing product. 'Repurpose' and 'Recycle' involve maximum usage of the materials used in the product, and 'Recover' is the least preferred and least efficient waste management practice involving the recovery of embedded energy in the waste material.

ioactive wastes. A large portion of waste management practices deal with municipal solid waste (MSW), which is the bulk of the waste that is created by household, industrial, and commercial activity. According to the Intergovernmental Panel on Climate Change (IPCC), municipal solid waste is expected to reach approximately 3.4 Gt by 2050; however, policies and lawmaking can reduce the amount of waste produced in different areas and cities of the world. Effective 'Waste Management' involves the practice of '7R' - 'R'efuse, 'R'educe', 'R'euse, 'R'epair, 'R'epurpose, 'R'ecycle and 'R'ecover. Amongst these '7R's, the first two ('Refuse' and 'Reduce') relate to the non-creation of waste, such as reducing consumption. The next two ('Reuse' and 'Repair') refer to increasing the usage of the existing product. 'Repurpose' and 'Recycle' involve maximum usage of the materials used in the product, and 'Recover' is the least preferred and least efficient waste management practice involving the recovery of embedded energy in the waste material.

e heat (and electricity from heat). Principles of waste management Waste hierarchy The waste hierarchy refers to the "3 Rs" Reduce, Reuse and Recycle, which classifies waste management strategies according to their desirability in terms of waste minimisation. The waste hierarchy is the bedrock of most waste minimization strategies. The aim of the waste hierarchy is to extract the maximum practical benefits from products and to generate the minimum amount of end waste; see: resource recovery. The waste hierarchy is represented as a pyramid because the basic premise is that policies should promote measures to prevent the generation of waste. The next step or preferred action is to seek alternative uses for the waste that has been generated, i.e., by reuse. The next is recycling which includes composting. Following this step is material recovery and waste-to-energy. The final action is disposal, in landfills or through incineration without energy recovery. This last step is the final resort for waste that has not been prevented, diverted, or recovered. The waste hierarchy represents the progression of a product or material through the sequential stages of the pyramid of waste management.

Mixed-use zoning combines residential, commercial, office, and public uses into a single space. Mixed-use zoning can be vertical, within a single building, or horizontal, involving multiple buildings. Planning and community activist Jane Jacobs wrote extensively on the connections between the separation of uses and the failure of urban renewal projects in New York City. She advocated dense mixed-use developments and walkable streets. In contrast to villages and towns, in which many residents know one another, and low-density outer suburbs that attract few visitors, cities and inner city areas have the problem of maintaining order between strangers. This order is maintained when, throughout the day and evening, there are sufficient people present with eyes on the street. This can be accomplished in successful urban districts that have a great diversity of uses, creating interest and attracting visitors. Jacobs' writings, along with increasing concerns about urban sprawl, are often credited with inspiring the New Urbanism movement. To accommodate the New Urbanist vision of walkable communities combining cafés, restaurants, offices and residential development in a single area, mixed-use zones have been created within some zoning systems. These still use the basic regulatory mechanisms of zoning, excluding incompatible uses such as heavy industry or sewage farms, while allowing compatible uses such as residential, commercial and retail activities so that people can live, work and socialise within a compact geographic area. The mixing of land uses is common throughout the world.

Inclusionary zoning refers to policies to increase the number of housing units within a development that are affordable to low and middle-income households. These policies can be mandatory as part of performance zoning or based on voluntary incentives, such as allowing greater density of development. Overlay zoning An overlay zone is a zoning district that overlaps one or more zoning districts to address a particular concern or feature of that area, such as wetlands, historic buildings or transit-oriented development. Overlay zoning has the advantage of providing targeted regulation to address a specific issue, such as a natural hazard, without having to significantly rewrite an existing zoning ordinance.

The United Kingdom does not use zoning as a technique for controlling land use. British land use control began its modern phase after the Town and Country Planning Act of 1947. Rather than dividing municipal maps into land use zones, English planning law places all development under the control of local and regional governments, effectively abolishing the ability to develop land by-right. However, existing development allows land use by-right as long as the use does not constitute a change in the type of land use. A property owner must apply to change land use type of any existing building, and such changes must be consistent with the local and regional land use plans. Development control or planning control is the element of the United Kingdom's system of town and country planning through which local government regulates land use and new building. There are 421 Local Planning Authorities (LPAs) in the United Kingdom. Generally they are the local borough or district council or a unitary authority. They each use a discretionary "plan-led system" whereby development plans are formed and the public consulted. Subsequent development requires planning permission, which will be granted or refused with reference to the development plan as a material consideration. The plan does not provide specific guidance on what type of buildings will be allowed in a given location, rather it provides general principles for development and goals for the management of urban change. Because planning committees (made up of directly elected local councillors) or in some cases planning officers themselves (via delegated decisions) have discretion on each application for development or change of use made, the system is considered a 'discretionary' one. Planning applications can differ greatly in scale, from airports and new towns to minor modifications to individual houses. In order to prevent local authorities from being overwhelmed by high volumes of small-scale applications from individual householders, a separate system of permitted development has been introduced. Permitted development rules are largely form-based, but in the absence of zoning, are applied at the national level. Examples include allowing a two-storey extension up to three metres at the rear of a property, extensions up to 50% of the original width at each side, and certain types of outbuildings in the garden, provided that no more than 50% of the land area is built over. These are appropriately sized for a typical three bedroom semi-detached property, but must be applied across a wide variety of housing types, from small terraces, to larger detached properties and manor houses. In August 2020, the UK Government published a consultation document called Planning for the Future. The proposals hinted at a move toward zoning in England, with areas given a Growth, Renewal or Protected designation, with the possibility of "sub-areas within each category", although the document did not elaborate on what the details of these might have been.

Tourism is travel for pleasure, and the commercial activity of providing and supporting such travel. UN Tourism defines tourism more generally, in terms which go "beyond the common perception of tourism as being limited to holiday activity only", as people "travelling to and staying in places outside their usual environment for not more than one consecutive year for leisure and not less than 24 hours, business and other purposes". Tourism can be domestic (within the traveller's own country) or international. International tourism has both incoming and outgoing implications on a country's balance of payments. Between the second half of 2008 and the end of 2009, tourism numbers declined due to a severe economic slowdown (see Great Recession) and the outbreak of the 2009 H1N1 influenza virus. These numbers, however, recovered until the COVID-19 pandemic put an abrupt end to the growth. The United Nations World Tourism Organization has estimated that global international tourist arrivals might have decreased by 58% to 78% in 2020, leading to a potential loss of US$0.9–1.2 trillion in international tourism receipts. Globally, international tourism receipts (the travel item in the balance of payments) grew to US$1.03 trillion (€740 billion) in 2005, corresponding to an increase in real terms of 3.8% from 2010. International tourist arrivals surpassed the milestone of 1 billion tourists globally for the first time in 2012. Emerging source markets such as China, Russia, and Brazil had significantly increased their spending over the previous decade. Global tourism accounts for c. 8% of global greenhouse-gas emissions. Emissions as well as other significant environmental and social impacts are not always beneficial to local communities and their economies. Many tourist development organizations are shifting focus to sustainable tourism to minimize the negative effects of growing tourism. This approach aims to balance economic benefits with environmental and social responsibility.

Definitions In 1936, the League of Nations defined a foreign tourist as "someone traveling abroad for at least twenty-four hours". Its successor, the United Nations, amended this definition in 1945, by including a maximum stay of six months. In 1941, Hunziker and Kraft defined tourism as "the sum of the phenomena and relationships arising from the travel and stay of non-residents, insofar as they do not lead to permanent residence and are not connected with any earning activity." In 1976, the Tourism Society of England's definition was: "Tourism is the temporary, short-term movement of people to destinations outside the places where they normally live and work and their activities during the stay at each destination.

Accommodation services from low-cost homestays to five-star hotels Hospitality services including food and beverage serving centers Health care services like massages All modes of transport, its booking and rental Travel agencies, guided tours and tourist guides Cultural services such as religious monuments, museums, and historical places Shopping Additional travel services like airport parking, airport hotels and travel insurance International tourism International tourism is tourism that crosses national borders. Globalization has made tourism a popular global leisure activity. The World Tourism Organization defines tourists as people "traveling to and staying in places outside their usual environment for not more than one consecutive year for leisure, business and other purposes". The World Health Organization (WHO) estimates that up to 500,000 people are in flight at any one time. In 2010, international tourism reached US$919B, growing 6.5% over 2009, corresponding to an increase in real terms of 4.7%. In 2010, there were over 940 million international tourist arrivals worldwide. By 2016 that number had risen to 1,235 million, producing $1.22 trillion USD in destination spending. The COVID-19 crisis had significant negative effects on international tourism significantly slowing the overall increasing trend. International tourism has significant impacts on the environment, exacerbated in part by the problems created by air travel but also by other issues, including wealthy tourists bringing lifestyles that stress local infrastructure, water and trash systems among others.

24, approximately 308 million reviews had been contributed to Yelp. In 2024, the company had over 76 million unique visitors on desktop and mobile. Yelp estimates that over 50% of its audience has an annual household income of more than $100,000. The company has been accused of using unfair practices to raise revenue from the businesses that are reviewed on its site – e.g., by presenting more negative review information for companies that do not purchase its advertising services or by prominently featuring advertisements of the competitors of such non-paying companies or conversely by excluding negative reviews from companies' overall rating on the basis that the reviews "are not currently recommended". There have also been complaints of aggressive and misleading tactics by some of its advertising sales representatives.

Having filed for an initial public offering (IPO) with the Securities Exchange Commission in November 2011, Yelp's stock began public trading on the New York Stock Exchange on March 2, 2012. In 2012, Yelp acquired its largest European rival, Qype, for $50 million. The following year, CEO Jeremy Stoppelman reduced his salary to $1. Yelp acquired start-up online reservation company SeatMe for $12.7 million in cash and stock in 2013. Yelp's second quarter 2013 revenue of $55 million "exceeded expectations", but the company was not yet profitable. In 2012/13, Yelp moved into its new corporate headquarters, occupying about 150,000 square feet on 12 floors of 140 New Montgomery (the former PacBell building) in San Francisco. The company was profitable for the first time in the second quarter of 2014, as a result of increasing ad spending by business owners and possibly from changes in Google's local search algorithm. The algorithm dubbed Google Pigeon made authoritative local directory sites like Yelp and TripAdvisor more visible. Over the course of the year, Yelp websites were launched in Mexico, Japan, and Argentina. Also in 2014, Yelp expanded in Europe through the acquisitions of German-based restaurant review site Restaurant-Kritik and French-based CityVox. In early February 2015, Yelp announced it bought Eat24, an online food-ordering service, for $134 million. Then in August 2017, Yelp sold Eat24 to Grubhub for $287.5 million. The acquisition resulted in a partnership to integrate Grubhub delivery into the Yelp profiles of restaurants. In late 2015, a "Public Services & Government" section was introduced to Yelp, and the General Services Administration began encouraging government agencies to create and monitor official government pages. For example, the Transportation Security Administration created official TSA Yelp pages. Later that year Yelp began experimenting in San Francisco with consumer alerts that were added to pages about restaurants with poor hygiene scores in government inspections. Research conducted by the Boston Children's Hospital found that Yelp reviews with keywords associated with food poisoning correlates strongly with poor hygiene at the restaurant. Researchers at Columbia University used data from Yelp to identify three previously unreported restaurant-related food poisoning outbreaks. On November 2, 2016, concurrent with its earnings report for Q3 2016, Yelp announced it would drastically scale back its operations outside North America and halt international expansion. This resulted in the termination of essentially all international employees across Yelp's 30+ international markets from the sales, marketing, public relations, business outreach, and government relations departments. Overseas employees now primarily consist of engineering and product management staff. These layoffs affected only 175 individuals or 4% of its total workforce. In March 2017, Yelp acquired the restaurant reservation app Nowait for $40 million. In April 2017, Yelp acquired Wi-Fi marketing company Turnstyle Analytics for $20 million. In early 2020, Yelp listed space at 55 Hawthorne Street, San Francisco, for 235 employees as available for sublease. Business closures and stay-at-home orders during the COVID-19 pandemic in the United States caused a massive decline in searches on Yelp (down 64-83% from March to April, depending on category) and company revenues. On April 9, the company announced it would lay off 1,000 employees, furlough about 1,100 with benefits, reduce hours for others, cut executive pay by 20–30%, and stop paying the CEO for the rest of 2020. In September 2021, Yelp announced that it was relocating its corporate headquarters to a smaller space at 350 Mission Street to be subleased from Salesforce. On June 1, 2023, Yelp decided to close its offices in Phoenix, Arizona and Hamburg, Germany. According to an announcement made by the company, less than 6 percent of the available workstations in these offices were being utilized. This move comes after Yelp had already shut down its New York, Chicago, and Washington, D.C. offices. As of mid-2023, Yelp maintains a single remaining office in the United States in San Francisco. Additionally, the company will continue its operations in Toronto, Canada, and London, United Kingdom. The closure and downsizing of these offices are expected to result in approximately $27 million in annual cost savings for Yelp during the 2023–24 fiscal year. As of February 2024, its website listed reviews for establishments in 32 countries. In November 2024, Yelp Inc. acquired RepairPal, an auto services platform, for $80 million. In January 2026, Yelp Inc.

ful negotiations to be acquired by Google. Yelp became a public company via an initial public offering in March 2012 and became profitable for the first time two years later. As of December 31, 2024, approximately 308 million reviews had been contributed to Yelp. In 2024, the company had over 76 million unique visitors on desktop and mobile. Yelp estimates that over 50% of its audience has an annual household income of more than $100,000. The company has been accused of using unfair practices to raise revenue from the businesses that are reviewed on its site – e.g., by presenting more negative review information for companies that do not purchase its advertising services or by prominently featuring advertisements of the competitors of such non-paying companies or conversely by excluding negative reviews from companies' overall rating on the basis that the reviews "are not currently recommended". There have also been complaints of aggressive and misleading tactics by some of its advertising sales representatives.

cupation. Vocational education can also be defined as the type of education given to an individual. Vocational education is known by a variety of names, depending on the country concerned, including career and technical education, or acronyms such as TVET (technical and vocational education and training; used by UNESCO) and TAFE (technical and further education). TVE refers to all forms and levels of education which provide knowledge and skills related to occupations in various sectors of economic and social life through formal, non-formal and informal learning methods in both school-based and work-based learning contexts. To achieve its aims and purposes, TVE focuses on the learning and mastery of specialized techniques and the scientific principles underlying those techniques, as well as general knowledge, skills and values. A vocational school is a type of educational institution specifically designed to provide vocational education, as is a technical college. Vocational education can take place at the post-secondary, further education, and higher education levels.

Purpose TVET serves multiple purposes. One purpose is to prepare the youth for work. This is done through the learning and development of work related skills and the mastery of underlying knowledge and scientific principles. Work is broadly defined and therefore refers to both formal employment and self-employment. To support self-employment, TVET curricula often include entrepreneurship training. Related to this is the social reproduction and transformation of occupational and vocational practices. A related role is continuing professional development. The rapid technological changes demand that workers continuously update their knowledge and skills. Unlike the past where a job could be held for life, it is common place to change vocations several times. TVET enables that flexibility in two ways. One is providing broad based technical knowledge and transversal skills on which different occupations can be based on. The second is providing continuing vocational training to workers. In contrast with the industrial paradigm of the old economy, today's global economy lays the onus on the worker to continually reinvent himself or herself. In the past, workers were assured of a job for life, with full-time employment, clear occupational roles and well established career paths. This is no longer the case. The knowledge dependent global economy is characterized by rapid changes in technology and related modes of work. Often, workers find themselves declared redundant and out of work. TVET today has the responsibility of re-skilling such workers to enable them find and get back to work Apart from providing work related education, TVET is also a site for personal development and emancipation. These concerns the development of those personal capacities that relate to realizing one's full potential with regard to paid or self employment, occupational interests, and life goals outside of work. At the same time TVET seeks to enable individual overcome disadvantages due to circumstances of birth or prior educational experiences. From a development point of view, TVET facilitates provide economic growth by increasing the productivity of workers. The returns from increased output far exceed the costs of training, direct and indirect, leading to economic growth. TVET like any other form of education also facilitates socio-economic development by enhancing the capacity of individuals to adopt practices that are socially worthwhile. As a form of education similar to all others, TVET aims to developing the broad range of personal capabilities that characterize an educated person. Thus, the provision of broad based knowledge seeks to ensure critic-creative thinking.

Labour market demands and trends After the 2008 financial crisis, labour markets across the world experienced structural changes that influenced the demand for skills and TVET. Unemployment worsened and the quality of jobs decreased, especially for youth. Gender differentials in labour force participation placed men ahead of women, and skill mismatches deepened. The crisis impacted labour markets adversely and led to deepening uncertainty, vulnerability of employment, and inequality. Furthermore, measures to improve efficiency and profitability in the economic recovery have often led to jobless growth, as happened in Algeria, India and post-apartheid South Africa. In seeking to address the level of vulnerable employment, TVET systems have focused on increasing the employability of graduates and enhancing their capacity to function effectively within existing vulnerable labour markets and to adjust to other labour market constraints. This has meant enhanced coordination among government departments responsible for TVET and employment policies. It has also created the need for TVET systems to develop mechanisms that identify skills needs early on and make better use of labour market information for matching skills demands and supply. TVET systems have focused more on developing immediate job skills and wider competencies. This has been accomplished by adopting competency-based approaches to instruction and workplace learning that enable learners to handle vulnerable employment, adjust to changing jobs and career contexts, and build their capacity to learn and agility to adapt. Migration flows Increasing migration are significant challenges to the national character of TVET systems and qualifications. TVET qualifications are progressively expected not only to serve as proxies for an individual's competencies but to also act as a form of a currency that signals national and international value. TVET systems have been developing mechanisms to enable credible and fair cross-border recognition of skills. In 2007, the ILO identified three types of recognition that TVET system may use: unilateral (independent assessment by the receiving country), mutual (agreements between sending and receiving countries), and multilateral (mostly between a regional grouping of countries). The most prevalent of these is unilateral recognition, which is mostly under the control of national credential evaluation agencies. Countries have been slow to move from input-based skill evaluations to outcome-based methodologies that focus on competencies attained. TVET systems are responding to migration by providing qualifications that can stand the rigour of these recognition systems and by creating frameworks for mutual recognition of qualifications. Regional Qualifications Frameworks such as those in Southern Africa, Europe, Asia and the Caribbean aim to significantly support the recognition of qualifications across borders.

eship can reach the "journeyman" or professional certification level of competence. In other cases, they can be offered a permanent job at the company that provided the placement.

Apprenticeship lengths vary significantly across sectors, professions, roles and cultures. In some cases, people who successfully complete an apprenticeship can reach the "journeyman" or professional certification level of competence. In other cases, they can be offered a permanent job at the company that provided the placement.

Expansion into services, agriculture, and mining sectors Cost-sharing between the industry and government Formalization of informal apprenticeships Alignment with the National Vocational Qualifications Framework (Pakistan NVQF) Increased female participation Financial incentives for industries exceeding apprentice requirements Joint assessment and certification by the industry, Chamber of Commerce, and government Switzerland In Switzerland, after the end of compulsory schooling, two thirds of young people follow a vocational training. Ninety percent of them are in the dual education system. Switzerland has an apprenticeship similarly to Germany and Austria. The educational system is ternar, which is basically dual education system with mandatory practical courses.

ice where a company licenses its business model to another company. It can involve the franchisor licensing some or part of its knowhow, procedures, intellectual property and other rights to sell its branded products and services to a franchisee. In return, the franchisee pays certain fees and agrees to comply with certain obligations, typically set out in a franchise agreement. For the franchisor, use of a franchise system is an alternative business growth strategy, compared to expansion through corporate owned outlets or "chain stores". Adopting a franchise system is a business growth strategy that minimizes the franchisor's capital investment and liability risk. Franchising is rarely an equal partnership, especially in the typical arrangement where the franchisee is an individual, unincorporated partnership or small privately-held corporation, as this ensures the franchisor has substantial legal and/or economic advantages over the franchisee. The usual exception to this rule is when the prospective franchisee is also a powerful corporate entity controlling a highly lucrative location, and/or captive market. For example, a large sports stadium for which prospective franchisors must compete to exclude one another.

Rationale and risk shift Franchising is one of the few means available to access venture capital without the need to give up control of the operation of the chain and build a distribution system for servicing it. After the brand and formula are carefully designed and properly executed, franchisors are able to sell franchises and expand rapidly across countries and continents using the capital and resources of their franchisees while reducing their own risk. There is also risk for the people buying the franchises. However, failure rates are much lower for franchise businesses than independent business startups. Franchisor rules imposed by the franchising authority are becoming increasingly strict.

Advantages and disadvantages of franchising as an entry mode Franchising brings with it several advantages and disadvantages for firms looking to expand into new areas and foreign markets. The primary advantage is that the firm does not have to bear the development cost and risks of opening a foreign market on its own, as the franchisee is typically responsible for those costs and risks, putting the onus on them to build a profitable operation as quickly as possible. Through franchising, a firm has the potential of building a global presence quickly and also at a low cost and risk. For the franchisee, the primary advantages are access to a well-known brand, support in setting up the business using operating manuals, and ongoing operational support including access to suppliers and employee training. A primary disadvantage to franchising from the franchisor’s viewpoint is quality control, as the franchisor wants the firm's brand name to convey a message to consumers about the quality and consistency of the firm's product. They want the consumer to experience the same quality regardless of location or franchise status. This can prove to be an issue with franchising, as a customer who had a bad experience at one franchise may assume that they will have the same experience at other locations with other services. Distance can make it difficult for firms to detect whether or not the franchises are of poor quality. One way around this disadvantage is to set up extra subsidiaries in each country or state in which the firm expands.

employers in the technology, manufacturing, and service sectors, including companies such as Micron Technology and Hewlett-Packard. The city is home to the Boise Art Museum, Idaho State Capitol, the annual Treefort Music Fest, and the Basque Block. History Etymology The origin of the name is uncertain. One account credits Capt. B. L. E. Bonneville of the U.S. Army as its source. After trekking for weeks through dry and rough terrain, his exploration party reached an overlook with a view of the Boise River Valley. The place where they stood is called Bonneville Point, located on the Oregon Trail east of the city. According to the story, a French-speaking guide, overwhelmed by the sight of the verdant river, yelled "Les bois! Les bois!" ("The woods! The woods!")—and the name stuck. The name may also derive from earlier mountain men who named the river that flows through the city. In the 1820s, French Canadian fur trappers associated with the British-owned Hudson's Bay Company set trap lines in the vicinity. Set in a high-desert area, the tree-lined valley of the Boise River became a distinct landmark, an oasis dominated by cottonwood trees.

Tribes and First Contact The area of Boise valley was inhabited by Boise Valley Shoshone and Bannock tribes, a part of the "Snake Country". According to the City of Boise's "History of Boise" report, "they gathered annually in the valley to participate in trading rendezvous with other tribes and catch salmon in the Boise River runs to help sustain them year-round. They spent winters in the valley where the climate was milder and visited the hot springs for bathing and healing. Castle Rock, called Eagle Rock by the tribes, was and remains a sacred site." Boise Valley Bannock tribes belonged to the "tuuˀagaidɨkaˀa" (black trout eaters). Boise Valley Shoshone belonged to the "Yahandeka" (groundhog eaters) grouping. They were among the early mounted Shoshone bands. They traveled over a considerable range by the beginning of the nineteenth century, with their main hunting lands along the lower Boise River and Payette River. When Donald MacKenzie developed the Snake country fur trade after 1818, the most prominent of the Boise Shoshone, Peiem (a Shoshoni rendition of "Big Jim", their leader's English name), became the most influential leader of the large composite Shoshoni band that white trappers regularly encountered in the Snake Country. In 1811, Wilson Hunt, employed as an agent in the fur trade under John Jacob Astor, organized and led the greater part of a group of about 60 men on an overland expedition to establish a fur trading outpost at the mouth of the Columbia River. This expedition passed through the Boise valley, and was the first ever time a white American has entered the region. Because of the War of 1812 and the lack of U.S. fur trading posts in the Pacific Northwest, most of the route was not used in the following two decades, and thus Snake Country remained free of settler incursions. After the conclusion of the war of 1812, until the 1840s, Oregon, while officially "jointly administered", was solely dominated by the British Hudson's Bay Company (HBC), which had a land connection to the inland of the Canadian Prairies via York Factory Express. Snake Country, including Boise Valley remained independent and relatively free of settler passage and incursion. There were two main reasons for this. Firstly, the general region east of the Cascades and west of the Rockies was described at the time in the media and literature of the eastern US as the "Great American Desert", an arid unproductive region, unsuitable for habitation. This discouraged settlers from traveling to the region of Boise; however, Oregon Country, on the other side of the Cascades, was a desirable destination for them. Nevertheless, the British had an official policy of discouraging American settlers, and settler incursions into Boise Valley along the Oregon Trail remained low until the early 1840s. The HBC established a fort in the region, the Old Fort Boise, 40 miles (64 km) west, near Parma, down the Boise River near its confluence with the Snake River at the Oregon border.

The North End, generally defined as the part of Boise north of State Street, contains many of the city's older homes. It is known for its tree-lined drives such as Harrison Boulevard, and for its quiet neighborhoods near the downtown area. Downtown Boise is visible from Camel's Back Park. On 13th Street, Hyde Park is home to restaurants and other businesses. The North End also hosts events such as the annual Hyde Park Street Fair. In 2008, the American Planning Association designated Boise's North End one of 10 Great Neighborhoods. Boise Highlands The Boise Highlands is just north of the North End; its location is generally defined as north of Hill Road and east of Bogus Basin Road.

The Boise, Idaho Metropolitan Statistical Area (MSA) (commonly known as the Boise Metropolitan Area or the Treasure Valley) is an area that encompasses Ada, Boise, Canyon, Gem, and Owyhee counties in southwestern Idaho, anchored by the cities of Boise and Nampa. It is the main component of the wider Boise–Mountain Home–Ontario, ID–OR Combined Statistical Area, which adds Elmore and Payette counties in Idaho and Malheur County, Oregon. It is the state's largest officially designated metropolitan area and includes Idaho's three largest cities: Boise, Nampa, and Meridian.

tistical Area, which adds Elmore and Payette counties in Idaho and Malheur County, Oregon. It is the state's largest officially designated metropolitan area and includes Idaho's three largest cities: Boise, Nampa, and Meridian. Nearly 40 percent of Idaho's total population lives in the area. As of the 2021 estimate, the Boise–Nampa, Idaho Metropolitan Statistical Area (MSA) had a population of 795,268, while the larger Boise City–Mountain Home–Ontario, ID–OR Combined Statistical Area (CSA) had a population of 850,341. The metro area is currently the third largest in the U.S.

ally designated metropolitan area and includes Idaho's three largest cities: Boise, Nampa, and Meridian. Nearly 40 percent of Idaho's total population lives in the area. As of the 2021 estimate, the Boise–Nampa, Idaho Metropolitan Statistical Area (MSA) had a population of 795,268, while the larger Boise City–Mountain Home–Ontario, ID–OR Combined Statistical Area (CSA) had a population of 850,341. The metro area is currently the third largest in the U.S.

ern Oregon to Boise, and is the most populated area in Idaho. Historically, the valley had been known as the Lower Snake River Valley or the Boise River Valley. Pete Olesen, president of the valley's association of local Chambers of Commerce, coined the name "Treasure Valley" in 1959 to reflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas.

The Treasure Valley is a valley in the western United States, primarily in southwestern Idaho, where the Payette, Boise, Weiser, Malheur, and Owyhee rivers drain into the Snake River. It includes all the lowland areas from Vale in rural eastern Oregon to Boise, and is the most populated area in Idaho. Historically, the valley had been known as the Lower Snake River Valley or the Boise River Valley. Pete Olesen, president of the valley's association of local Chambers of Commerce, coined the name "Treasure Valley" in 1959 to reflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas.

eflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas. As the Boise Metropolitan Area grows, more and more undeveloped and agricultural land is being urbanized. History Settling the region The tribes that roamed the area, specifically, were the Northern Paiute and Shoshone. In 1834, Thomas McKay built the original Fort Boise, in the area near present-day Parma, which was run for a time by Francois Payette. It later was moved because of flooding troubles and was abandoned in 1854. The Oregon Trail runs through the Treasure Valley. The valley was settled for the most part by ranchers and farmers, initially to supply the gold and silver mining communities in the higher elevations nearby: Idaho City in the Boise Basin and Silver City in the Owyhees. A new Fort Boise was constructed by the U.S. Army in 1863 in present-day Boise, from which the city grew.

the Northwestern United States. It drains a rugged portion of the Sawtooth Range in southwestern Idaho northeast of Boise, as well as part of the western Snake River Plain. The watershed encompasses approximately 4,100 square miles (11,000 km2) of highly diverse habitats, including alpine canyons, forest, rangeland, agricultural lands, and urban areas. Description The Boise River rises in three separate forks in the Sawtooth Range at elevations exceeding 10,000 feet (3,050 m), and is formed by the confluence of its North and Middle forks. The North Fork, 50 miles (80 km) long, rises in the Sawtooth Wilderness Area, along the Boise–Elmore county line, 60 miles (100 km) northeast of Boise. It flows generally southwest through the remote mountains in the Boise National Forest. The Middle Fork, approximately 52 miles (84 km) in length, rises within 12 miles (19 km) of the North Fork in the southern Sawtooth Wilderness Area in northeastern Elmore County. It flows west-southwest near the town of Atlanta, joining the North Fork to form the Boise River, approximately 15 miles (24 km) southeast of Idaho City.

Description The Boise River rises in three separate forks in the Sawtooth Range at elevations exceeding 10,000 feet (3,050 m), and is formed by the confluence of its North and Middle forks. The North Fork, 50 miles (80 km) long, rises in the Sawtooth Wilderness Area, along the Boise–Elmore county line, 60 miles (100 km) northeast of Boise. It flows generally southwest through the remote mountains in the Boise National Forest. The Middle Fork, approximately 52 miles (84 km) in length, rises within 12 miles (19 km) of the North Fork in the southern Sawtooth Wilderness Area in northeastern Elmore County. It flows west-southwest near the town of Atlanta, joining the North Fork to form the Boise River, approximately 15 miles (24 km) southeast of Idaho City.

The watershed encompasses approximately 4,100 square miles (11,000 km2) of highly diverse habitats, including alpine canyons, forest, rangeland, agricultural lands, and urban areas. Description The Boise River rises in three separate forks in the Sawtooth Range at elevations exceeding 10,000 feet (3,050 m), and is formed by the confluence of its North and Middle forks. The North Fork, 50 miles (80 km) long, rises in the Sawtooth Wilderness Area, along the Boise–Elmore county line, 60 miles (100 km) northeast of Boise. It flows generally southwest through the remote mountains in the Boise National Forest. The Middle Fork, approximately 52 miles (84 km) in length, rises within 12 miles (19 km) of the North Fork in the southern Sawtooth Wilderness Area in northeastern Elmore County. It flows west-southwest near the town of Atlanta, joining the North Fork to form the Boise River, approximately 15 miles (24 km) southeast of Idaho City.

In the last fifty years, administrative law, in many countries of the civil law tradition, has opened itself to the influence of rules posed by supranational legal orders, in which judicial principles have strong importance: it has led, for one, to changes in some traditional concepts of the administrative law model, as has happened with the public procurements or with judicial control of administrative activity and, for another, has built a supranational or international public administration, as in the environmental sector or with reference to education, for which, within the United Nations' system, it has been possible to assist to a further increase of administrative structure devoted to coordinate the States' activity in that sector.

The principle of the lawfulness of the executive (Gesetzmäßigkeit der Verwaltung): administrative authorities are bound to act where a law (of parliament, or of delegated legislation) prescribes it, and to not violate any laws (artt. 1III and 20III of the Constitution). Where its actions may burden or comparatively disadvantage a person, they must rest on a grant of authority by the legislature: this concept is called the (grundrechtliche) Vorbehalt des Gesetzes or Eingriffsvorbehalt, meaning that limiting interference with (fundamental) rights is a sphere of action that is reserved to statute. The principle of legal security, which includes a principle of legal certainty and the principle of non-retroactivity. The principle of proportionality, which means that an act of an authority has to be suitable, necessary and appropriate. The vast majority of public administration in Germany is performed by its component federal entities (German: (Bundes-)Länder), which are responsible for the execution both of federal laws and their own laws (execution of the laws directly by authorities of the Federal Republic being the exceptional case, as established by artt. 83 et seqq.

Scope of administrative law German legal scholarship does not have an agreed-upon definition for public administration. In one sense, administration – more precisely, everything that is subject to administrative law – is conceptualized as being all state activity of a certain type (material definition of public administration). This approach leads to disputes about whether to treat acts of public authority as acts of administration (and therefore executive) even when they are performed by component parts of the state (that is to say, the government) that the law formally classifies as a legislative or a judicial body: For instance, the parliament may impose a fine on one of its members for misbehavior, or a presiding judge may direct a disruptive member of the public to be removed from the viewing gallery. The opposite approach – the formalist definition of public administration – begins its examination by considering all those public authorities intended (judging by their lawful charter, organizational context, internal structure, and performed tasks) to do the work of public administration, and equates their functioning with public administration. There is some danger of circular reasoning, since the formal categorization of the organizational unit may, in turn, derive from some material conception of its function. Some functions that might, in the material view, be seen as not of the executive type, and thus not as belonging to the field of administration (such as the creation of rules with the force of law, which are usually thought of as legislative), would then be held to the standards of administrative law, and not another field of law. This discussion is of seen as being of particular importance when considering the role of administrative law in maintaining the division of government powers. For this purpose, a traditional approach tries negatively to define administration by subtracting those operations of the state which cannot be called administration, namely law-making and adjudication. Using this negative definition, though, requires law-making and adjudication to be defined first, and leaves some activities that are a poor fit for the term "administration", such as the cabinet government's political leadership decisions, within the bounds of the definition. Positive definitions abound, but none has won out over the others, or been entirely convincing to scholars of German administrative law. Nevertheless, certain features may be seen as being characteristic of administration: According to Maurer and Waldhoff, administration is social engineering (exerting influence on the non-state, societal domain) (1), oriented towards some conception of the (ever-changing) public interest (2), that consists of taking action in the present, with a view to engineering the future (3), and that comprises concrete measures to regulate individual cases and to realize particular plans (4). Scholarly treatises of German administrative law are almost always split into two parts: doctrines and rules that can be found across-the-board (allgemeines Verwaltungsrecht); and doctrines and rules that exist only in certain parts of administrative law (German: besonderes Verwaltungsrecht, lit. 'special administrative law') – e.g.

delivers personalized content to websites, mobile devices, and set-top boxes. A large range of content discovery platforms currently exist for various forms of content ranging from news articles and academic journal articles to television. As operators compete to serve as the gateway to home entertainment, personalized television emerges as a key service differentiator.

ng from news articles and academic journal articles to television. As operators compete to serve as the gateway to home entertainment, personalized television emerges as a key service differentiator.

t, personalized television emerges as a key service differentiator. Academic content discovery has recently become another area of interest, the emergence of numerous companies dedicated to assisting academic researchers in keeping up to date with relevant academic content and facilitating serendipitous discovery of new content. Overview Recommender systems usually make use of either or both collaborative filtering and content-based filtering, as well as other systems such as knowledge-based systems. Collaborative filtering approaches build a model from a user's past behavior (e.g., items previously purchased or selected and/or numerical ratings given to those items) as well as similar decisions made by other users. This model is then used to predict items (or ratings for items) that the user may have an interest in.

s of websites allow users to register and sell single items to many items for a "post-selling" fee. Because marketplaces aggregate products from a wide array of providers, the selection is wider, and availability is higher than in vendor-specific online retail stores.

information is provided by multiple third parties. Online marketplaces are the primary type of multichannel ecommerce and can be a way to streamline the production process. In an online marketplace, consumer transactions are processed by the marketplace operator and then delivered and fulfilled by the participating retailers or wholesalers. These types of websites allow users to register and sell single items to many items for a "post-selling" fee. Because marketplaces aggregate products from a wide array of providers, the selection is wider, and availability is higher than in vendor-specific online retail stores.

is wider, and availability is higher than in vendor-specific online retail stores. Some online marketplaces have a wide variety of general interest products that cater to almost all the needs of the consumers, others are consumer specific and cater to a particular segment. B2B online marketplaces Business-to-business (B2B) online marketplaces are platforms that allow companies to buy and sell products or services to other businesses. These marketplaces typically focus on a specific product or service category and are used by businesses to find suppliers, negotiate prices, and manage logistics. Some examples of B2B online marketplaces include VerticalNet, Commerce One, and Covisint, which were some of the earliest B2B marketplaces to emerge in the early days of e-commerce.

akeup enthusiasts have made up a large part of make-up artists. These self-taught artists use themselves as their own canvas or work freelance within their community, often in areas that may not have access to renowned make-up artists. Many have found their way into the industry through this enthusiasm. Makeup techniques Fashion Fashion makeup is used in magazine photography as well as on the fashion runway. Avant-garde makeup is also an applicable technique used for projects that require experimental themes.

equired by agencies in order for them to hire the MUA. Bigger production companies have in-house makeup artists on their payroll, although most MUAs are generally freelance and their schedules remain flexible depending on the project. Over time, makeup enthusiasts have made up a large part of make-up artists. These self-taught artists use themselves as their own canvas or work freelance within their community, often in areas that may not have access to renowned make-up artists.

make-up artists. These self-taught artists use themselves as their own canvas or work freelance within their community, often in areas that may not have access to renowned make-up artists. Many have found their way into the industry through this enthusiasm. Makeup techniques Fashion Fashion makeup is used in magazine photography as well as on the fashion runway. Avant-garde makeup is also an applicable technique used for projects that require experimental themes.

Defining e-commerce The term was coined and first employed by Robert Jacobson, Principal Consultant to the California State Assembly's Utilities & Commerce Committee, in the title and text of California's Electronic Commerce Act, carried by the late Committee Chairwoman Gwen Moore (D-L.A.) and enacted in 1984. E-commerce typically uses the web for at least a part of a transaction's life cycle although it may also use other technologies such as e-mail. Typical e-commerce transactions include the purchase of products (such as books from Amazon) or services (such as music downloads in the form of digital distribution such as the iTunes Store). There are three areas of e-commerce: online retailing, electronic markets, and online auctions. E-commerce is supported by electronic business.

Online shopping for retail sales direct to consumers via web sites and mobile apps, conversational commerce via live chat, chatbots, and voice assistants. Providing or participating in online marketplaces, which process third-party business-to-consumer (B2C) or consumer-to-consumer (C2C) sales. Drop shipping is commonplace in such operations. Business-to-business (B2B) buying and selling. B2B, or what is referred to as business-to-business is defined by the Cambridge dictionary as business arrangements or trade between different businesses, rather than between businesses and the general public. Direct-to-Consumer (D2C) sales, in which manufactures or brands sell directly to end customers without traditional retail intermediaries.

Business-to-Business Business to Consumer Retail Business to Government Consumer-to-business Consumer to Consumer Direct-to-Consumer Forms Contemporary electronic commerce can be classified into two categories. The first category is business based on types of goods sold (involves everything from ordering "digital" content for immediate online consumption, to ordering conventional goods and services, to "meta" services to facilitate other types of electronic commerce). The second category is based on the nature of the participant (B2B, B2C, C2B and C2C). On the institutional level, big corporations and financial institutions use the internet to exchange financial data to facilitate domestic and international business.

. In Canada, national model codes are published by the National Research Council of Canada. In the United Kingdom, compliance with Building Regulations is monitored by building control bodies, either Approved Inspectors or Local Authority Building Control departments.

uildings. The building code becomes law of a particular jurisdiction when formally enacted by the appropriate governmental or private authority. Building codes are generally intended to be applied by architects, engineers, interior designers, constructors and regulators but are also used for various purposes by safety inspectors, environmental scientists, real estate developers, subcontractors, manufacturers of building products and materials, insurance companies, facility managers, tenants, and others. Codes regulate the design and construction of structures where adopted into law. Examples of building codes began in ancient times. In the USA the main codes are the International Building Code or International Residential Code [IBC/IRC], electrical codes and plumbing, mechanical codes. Fifty states and the District of Columbia have adopted the I-Codes at the state or jurisdictional level. In Canada, national model codes are published by the National Research Council of Canada. In the United Kingdom, compliance with Building Regulations is monitored by building control bodies, either Approved Inspectors or Local Authority Building Control departments.

Types The practice of developing, approving, and enforcing building codes varies considerably among nations. In some countries building codes are developed by the government agencies or quasi-governmental standards organizations and then enforced across the country by the central government. Such codes are known as the national building codes (in a sense they enjoy a mandatory nationwide application). In other countries, where the power of regulating construction and fire safety is vested in local authorities, a system of model building codes is used. Model building codes have no legal status unless adopted or adapted by an authority having jurisdiction. The developers of model codes urge public authorities to reference model codes in their laws, ordinances, regulations, and administrative orders. When referenced in any of these legal instruments, a particular model code becomes law. This practice is known as 'adoption by reference'. When an adopting authority decides to delete, add, or revise any portions of the model code adopted, it is usually required by the model code developer to follow a formal adoption procedure in which those modifications can be documented for legal purposes. There are instances when some local jurisdictions choose to develop their own building codes. At some point in time all major cities in the United States had their own building codes. However, due to ever increasing complexity and cost of developing building regulations, virtually all municipalities in the country have chosen to adopt model codes instead. For example, in 2008 New York City abandoned its proprietary 1968 New York City Building Code in favor of a customized version of the International Building Code. The City of Chicago remains the only municipality in America that continues to use a building code the city developed on its own as part of the Municipal Code of Chicago. In Europe, the Eurocode: Basis of structural design, is a pan-European building code that has superseded the older national building codes. Each country now has National Annexes to localize the contents of the Eurocodes. Similarly, in India, each municipality and urban development authority has its own building code, which is mandatory for all construction within their jurisdiction.

Private equity (PE) is stock in a private company that does not offer stock to the general public. Instead, it is offered to specialized investment funds and limited partnerships that take an active role in managing and structuring the companies. In colloquial usage, "private equity" can refer to these investment firms rather than the companies in which they invest. Private-equity capital is invested into a target company either by an investment management company (private equity firm), a venture capital fund, or an angel investor; each category of investor has specific financial goals, management preferences, and investment strategies for profiting from their investments. Private equity can provide working capital to finance a target company's expansion, including the development of new products and services, operational restructuring, management changes, and shifts in ownership and control. As a financial product, a private-equity fund is private capital for financing a long-term investment strategy in an illiquid business enterprise.

Leveraged buyout (LBO) refers to a strategy of making equity investments as part of a transaction in which a company, business unit, or business asset is acquired from the current shareholders typically with the use of financial leverage. The companies involved in these transactions are typically mature and generate operating cash flows. Private-equity firms view target companies as either Platform companies, which have sufficient scale and a successful business model to act as a stand-alone entity, or as add-on / tuck-in / bolt-on acquisitions, which would include companies with insufficient scale or other deficits. Leveraged buyouts involve a financial sponsor agreeing to an acquisition without itself committing all the capital required for the acquisition. To do this, the financial sponsor will raise acquisition debt, which looks to the cash flows of the acquisition target to make interest and principal payments. Acquisition debt in an LBO is often non-recourse to the financial sponsor and has no claim on other investments managed by the financial sponsor. Therefore, an LBO transaction's financial structure is particularly attractive to a fund's limited partners, allowing them the benefits of leverage, but limiting the degree of recourse of that leverage. This kind of financing structure leverage benefits an LBO's financial sponsor in two ways: (1) the investor only needs to provide a fraction of the capital for the acquisition, and (2) the returns to the investor will be enhanced, as long as the return on assets exceeds the cost of the debt. As a percentage of the purchase price for a leverage buyout target, the amount of debt used to finance a transaction varies according to the financial condition and history of the acquisition target, market conditions, the willingness of lenders to extend credit (both to the LBO's financial sponsors and the company to be acquired) and the interest costs and the ability of the company to cover those costs. Historically the debt portion of a LBO will range from 60 to 90% of the purchase price.

"Distressed-to-Control" ("Loan-to-Own") investment whereby the investor buys debt securities in hope of acquiring ownership and control of the company's equity after financing the corporate restructuring of the target company; "Special Situations" ("Turnaround") investment wherein the investor buys debt securities and equity investments, to be used as rescue financing that will restore the profitability of the financially-weak target company. Moreover, the private-equity investment strategies of hedge funds also include actively trading the loans held and the bonds issued by the financially-weak target companies. Secondaries Secondary investments refer to investments made in existing private-equity assets. These transactions can involve the sale of private equity fund interests or portfolios of direct investments in privately held companies through the purchase of these investments from existing institutional investors. By its nature, the private-equity asset class is illiquid, intended to be a long-term investment for buy and hold investors. Secondary investments allow institutional investors, particularly those new to the asset class, to invest in private equity from older vintages than would otherwise be available to them. Secondaries also typically experience a different cash flow profile, diminishing the j-curve effect of investing in new private-equity funds. Often investments in secondaries are made through third-party fund vehicle, structured similar to a fund of funds although many large institutional investors have purchased private-equity fund interests through secondary transactions.

emonies involve an exchange of marriage vows by a couple; a presentation of a gift (e.g., an offering, rings, a symbolic item, flowers, money, or a dress); and a public proclamation of marriage by an authority figure or celebrant. Special wedding garments are often worn, and the ceremony is sometimes followed by a wedding reception.

In the Roman Catholic Church, Holy Matrimony is considered to be one of the seven sacraments, in this case, one that the spouses bestow upon each other in front of a priest and members of the community as witnesses. As with all sacraments, it is seen as having been instituted by Jesus himself (see Gospel of Matthew 19:1–2, Catechism of the Catholic Church §1614–1615). The Second Vatican Council's Constitution on the Sacred Liturgy noted that there can be a place for appropriate "customs and ceremonies" to be incorporated into a Catholic marriage service. In the Eastern Orthodox Church, it is one of the Mysteries and is seen as an ordination and a martyrdom. The Christian wedding ceremony of Saint Thomas Christians, an ethnoreligious group of Christians in India, incorporates elements from local Indian traditions. Protestant weddings may be elaborate (as with Lutheranism and Anglicanism) or simple (as with Baptists). For example, in the United Methodist Church, the Service of Christian Marriage (Rite I) includes the elements found in a typical Sunday service, such as hymns, prayers, and readings from the Bible, as well as other elements unique to a wedding, including taking marriage vows and an optional exchange of wedding rings, as well as a special benediction for the couple. Holy Communion may be part of the wedding service in liturgical Protestant churches (e.g., Lutheran, Anglican, or Methodist), but is rarely, if ever, found in weddings of other low-church Protestant denominations (e.g., Baptists). A Quaker wedding ceremony in a Friends meeting is similar to any other meeting for worship, and therefore often very different from the experience expected by non-Friends. In some Western countries, a separate and secular civil wedding ceremony is required for recognition by the state, while in other Western countries, couples must merely obtain a marriage license from a local government authority and can be married by Christian or other clergy authorized by law to do so. Since the beginning of the 21st century, same-sex couples have been allowed to marry civilly in many countries, and some Christian churches in those countries allow religious marriages of same-sex couples, though some forbid it.

A white wedding is a term for a traditional formal or semi-formal Western wedding. This term refers to the color of the wedding dress, which became popular after Queen Victoria wore a pure white gown when she married Prince Albert and many were quick to copy her choice. At the time, the color white symbolized both extravagance and virginal purity to many and had become the color for use by young women being formally presented to the royal court. White weddings often take place in a place of worship, such as a church, synagogue, or mosque. Civil wedding A civil wedding is a ceremony presided over by a local civil authority, such as an elected or appointed judge, Justice of the peace or the mayor of a locality. Civil wedding ceremonies may use references to God or a deity (except in U.K law where readings and music are also restricted), but generally no references to a particular religion or denomination. Civil weddings allow partners of different faiths to marry without one partner converting to the other partner's religion. They can be either elaborate or simple. Many civil wedding ceremonies take place in local town or city halls, courthouses in judges' chambers, in attorneys offices, in the mayor's office, or in the governor's office. The relevance of civil weddings varies greatly from country to country. Some countries do not provide any form of civil wedding at all (Israel and many Islamic countries), while in others it is the only legally recognized form of marriage (most countries in North America, South America, Europe, Asia, Australia and The Pacific). In this case civil weddings are typically either a mandatory prerequisite for any religious ceremony or religious weddings have no legal significance at all.

state 84, and 6 miles (9.7 km) west of Meridian. It is the second principal city of the Boise metropolitan area. The name "Nampa" may have come from a Shoshoni word meaning 'moccasin' or 'footprint'. According to toponymist William O. Bright, the name comes from the Shoshoni word /nampai/, meaning "foot".

W. J. McClelland, c.1901–1903 Frank H. Sutherland, c.1903–1904 H. A. Partridge, c.1904–1905, 1907–1908, 1913–1914 Rudolphus W. Purdum, c.1905–1906 E. H. Dewey, c.1909–1911 T. E. Munhall, c.1915–1917 Robert A. Davis, c.1917–1919 H. H. Keim, c.1919–1920 J. Fremont Bow, 1921–1923 Eugene Emerson, c.1923–1925 George Meffan, 1925–1929 Eustace Smallwood, c.1929–1930 E. W. Rising, c.1933–1935 George I. Van Name, 1935–1937 R. Lewis Ord, 1937–1939 Ben H. Waigand, 1939–1943 A. E. Lindsey, c.1943–1945 Sevren G. Honstead, 1945–1947 Peter Johnson, 1947–1951 Preston Capell, c.1951–1957 Thomas Leupp, 1957–1961 Ernest Starr, 1961–1981 Winston K.

pa ( ) is the most populous city in Canyon County, Idaho, United States. The population was 100,200 at the 2020 census. It is Idaho's third-most populous city. Nampa is about 20 miles (32 km) west of Boise along Interstate 84, and 6 miles (9.7 km) west of Meridian. It is the second principal city of the Boise metropolitan area. The name "Nampa" may have come from a Shoshoni word meaning 'moccasin' or 'footprint'. According to toponymist William O. Bright, the name comes from the Shoshoni word /nampai/, meaning "foot".

, some of which use customer reviews as well as or instead of professional reviews. The reviews may themselves be graded for usefulness or accuracy by other users. Customer reviews are widely used by consumers to make informed purchasing decisions and compare products and services online. History Before the arrival of the internet, customers could review products and services through customer comment boxes and customer service helplines.

A customer review is an evaluation of a product or service made by someone who has purchased and used, or had experience with, a product or service. Customer reviews are a form of customer feedback on electronic commerce and online shopping sites. There are also dedicated review sites, some of which use customer reviews as well as or instead of professional reviews. The reviews may themselves be graded for usefulness or accuracy by other users.

or accuracy by other users. Customer reviews are widely used by consumers to make informed purchasing decisions and compare products and services online. History Before the arrival of the internet, customers could review products and services through customer comment boxes and customer service helplines. These methods still exist today although internet review sites are used more in recent years. Reliability The reliability of customer reviews has been questioned. Abuses akin to ballot stuffing of favourable reviews by the seller (known as incentivized reviews), or negative reviews by competitors, need to be policed by the review host site. Indeed, gathering fake reviews has become big business. In 2012, for example, fake book reviews have been revealed as significantly affecting ratings on Amazon. In 2016 Amazon banned the practice of reviewing complimentary products, researchers have shown that the process still continued as of 2021, but without any disclosures. Since few sites restrict users to reviewing only items they have actually purchased, it is difficult to know if a customer is real, has actually used the product they are reviewing, and is giving honest, unbiased feedback about the product or services being reviewed. Tools like Fakespot and ReviewMeta can help spot fake reviews on shopping sites like Amazon. Unfortunately, the tools do not work on most other websites that show customer reviews. Public calls have been growing stronger, demanding that review sites be held accountable for publishing fake reviews. Most recently (June 2021), the Competition and Markets Authority (CMA) in the United Kingdom has launched an investigation into whether Amazon and Google are doing enough to prevent fake reviews from being published on their sites. Both businesses claim to have sufficient resources and policies in place to prevent fake reviews from being published. Legal steps could be taken against the giants if CMA determines those claims to be false.

94,967, which by 2025 was estimated to have risen to 546,141. Ada County is by far the state's most populous county; it is home to 26.8% of the state's population. The county seat and largest city is Boise, which is also the state capital. Ada County is included in the Boise metropolitan area. The Ada County Highway District has jurisdiction over all the local county and city streets, except for private roads and state roads.

the Cascade Range, Ada County ranks second in population, behind Spokane County, Washington. History Ada County was created by the Idaho Territory legislature on December 22, 1864, partitioned from Boise County. It is named for Ada Riggs, the daughter of H. C. Riggs, a member of the legislature; he established the county and was a co-founder of Boise.

History Ada County was created by the Idaho Territory legislature on December 22, 1864, partitioned from Boise County. It is named for Ada Riggs, the daughter of H. C. Riggs, a member of the legislature; he established the county and was a co-founder of Boise. Canyon County, which originally included Payette County and most of Gem County, was partitioned from western Ada County in 1891. Geography According to the United States Census Bureau, the county has a total area of 1,060 square miles (2,700 km2), of which 1,053 square miles (2,730 km2) is land and 7.9 square miles (20 km2) (0.7%) is water. The Boise River flows through the northern portion of the county, and the northwest border is bounded by the foothills of the Boise Range mountains; the summits are in adjacent Boise County.

haircut, or coiffure refers to the styling of hair, usually on the human head but sometimes on the face or body. The fashioning of hair can be considered an aspect of personal grooming, fashion, and cosmetics, although practical, cultural, and popular considerations also influence some hairstyles. Hairstyles may involve altering the length, texture, shape, or arrangement of hair through various styling methods. The oldest known depiction of hair styling is hair braiding, which dates back about 30,000 years.

opular considerations also influence some hairstyles. Hairstyles may involve altering the length, texture, shape, or arrangement of hair through various styling methods. The oldest known depiction of hair styling is hair braiding, which dates back about 30,000 years.

Women's hair was often elaborately and carefully dressed in special ways, though it was also frequently kept covered outside the home, especially for married women. Prehistory and history People's hairstyles are largely determined by the fashions of the culture they live in. Hairstyles have played an important role in human culture for centuries, serving not only as a form of personal appearance but also as a way to represent cultural traditions, social roles, identity, and changing fashion trends. Hairstyles are markers and signifiers of social class, age, marital status, racial identification, political beliefs, and attitudes about gender. Some people may cover their hair totally or partially for cultural or religious reasons.

which the photographs are later used for the couple's wedding invitations. On the wedding day, the photographer(s) will provide portrait photography as well as documentary photography to document the different wedding events and rituals throughout the day(s). History The practice of wedding photography has evolved and grown since the invention of the photographic art form. However, in the early days of photography, most couples did not hire a photographer to record the actual wedding itself. Rather, they might have posed for a formal photo in their best clothes before or after a wedding. In the late 1860s, more couples started posing in their wedding clothes or sometimes hired a photographer to come to the wedding venue. Due to the nature of the bulky equipment and lighting issues, wedding photography was largely a studio practice for most of the late 19th century.

South Asian wedding photography refers to wedding photography of celebrations relating to Indian, Pakistani and other South Asian weddings. Indian weddings are a Rs. 800 billion industry, which is expected to grow by 25% per annum, with a significant part dedicated to photography. There are various rituals like the Seven Promises of Indian Marriage which are called as 'Saat Pheras' and are performed on the day of wedding. An Indian marriage is traditionally a public affair, with the bridegroom taken in a procession through the town. Even a modest Indian wedding can have several hundred participants, who are all thought to be "relatives and close family friends". By convention, a photographer is required to include each guest in at least one photograph which includes the bride and the groom. Generally, Indian wedding proceedings do not pause for photographs, requiring the photographers to anticipate the next event and be ready with the right angle. These factors make photographing an Indian wedding significantly different from western weddings. Wedding photography is now a major commercial endeavor in India that supports the bulk of the efforts for many photographers.

Initially, professional studio photographers might bring a lot of bulky equipment, thus limiting their ability to record the entire event. Even "candid" photos were more often staged after the ceremony. In the 1970s, the more modern approach to recording the entire wedding event started evolving into the practice as we know it today, including a more "documentary photography" style of photography. Technology During the film era, photographers favored colour negative film and medium-format cameras, especially Hasselblad. Today, many more weddings are photographed with digital SLR cameras as the digital convenience provides quick detection of lighting mistakes and allows creative approaches to be reviewed immediately. In spite of this trend, some photographers continue to shoot with film as they prefer the film aesthetic, and others are of the opinion that negative film captures more information than digital technology, and has less margin for exposure error. Certainly true in some cases, exposure latitude inherent in a camera's native Raw image format (which allows for more under- and over- exposure than JPEG) varies from manufacturer to manufacturer.

The hospitality industry is a broad category of fields within the service industry that includes lodging, food and beverage services, event planning, theme parks, travel agency, tourism, hotels, casinos, real estate, restaurants, nightclubs, and bars.

Sectors According to the Cambridge Business English Dictionary the "hospitality industry" consists of hotels and food service, equivalent to NAICS code 72, "Accommodation and Food Service". Definition in the United States In 2020, the United States Department of Labor Standard Industrial Classification (SIC) defines the hospitality industry more broadly, including: 701 Hotels and Motels, including auto courts, bed and breakfast inns, cabins and cottages, casino hotels, hostels, hotels (except residential ones), inns furnishing food and lodging, motels, recreational hotels, resort hotels, seasonal hotels, ski lodges and resorts, tourist cabins and tourist courts 704 Organization Hotels and Lodging Houses, On a Membership Basis 58 Eating and Drinking Places (cf. U.S. "food service industry", U.K. "catering industry") 5812 Eating Places, including restaurants (among which carry-out restaurants, drive-in restaurants and fast food restaurants), automats, beaneries, box lunch stands, buffets, cafés, cafeterias, caterers, coffee shops, commissary restaurants a.k.a. canteens, concession stands, dhaba , military hotel prepared food (e.g., in airports and sports arenas), contract feeding, dairy bars, diners, dining rooms, dinner theaters, food bars, frozen custard stands, grills, hamburger stands, hot dog stands, ice cream stands, industrial feeding, institutional food service such as that aboard airplanes, railroads, and ships), lunch bars, lunch counters, luncheonettes, lunchrooms, oyster bars, pizza parlors and pizzerias, refreshment stands, sandwich bars or shops, snack shops, soda fountains, soft drink stands, submarine sandwich shops, and tearooms. Sources other than the SIC also mention other formats of eating places such as cyber cafés, ramen shops a.k.a. noodle bars, and sushi bars. 5813 Drinking Places (alcoholic beverages) including bars, beer gardens/parlors/taverns, sale of beer, wine, and liquors for on-premise consumption, bottle clubs, cabarets, cocktail lounges, discotheques, drinking places, nightclubs, saloons, taprooms, taverns, and wine bars 472 Arrangement of Passenger Transportation 4724 Travel Agencies 4725 Tour Operators 4729 Arrangement of Passenger Transportation, Not Elsewhere Classified, such as ticket offices not operated by transportation companies, and services that arrange carpools In the United States, hotels are the most popular vacation accommodation.

Definition in Dutch, Italian and French Horeca (also HoReCa, HORECA) is the Dutch, Indonesian, German, Italian, Romanian, Portuguese and French term for the food service and hotel industries. The term is a syllabic abbreviation of the words hotel/restaurant/café. The term is mostly used in the Benelux countries, Indonesia, and Switzerland. "Horeca" is often not a one-to-one equivalent to the term "hospitality industry" used in English, which is often used more broadly. According to the Cambridge Business English Dictionary the "hospitality industry" consists of hotels and food service, equivalent to NAICS code 72, "Accommodation and Food Service". However, the United States Department of Labor Standard Industry Classification (SIC) defines the hospitality industry more broadly, as noted above. The Dutch Uniforme Voorwaarden Horeca (UVH) is translated into English as Uniform Conditions for the Hotel and Catering Industry. This code covers hotels, bars, restaurants and related businesses in the Netherlands. Koninklijke Horeca Nederland is the Dutch trade association for the hotel and catering industry. This sector is one of the fastest growing in Europe. In 2004, more than 7.8 million people were employed and the sector generated more than $338 billion in turnover. Jobs tend to be temporary, with irregular hours, low pay, and few career prospects. There is a high proportion of young people working in the sector.

city in Idaho. As of the 2020 census, Caldwell had a population of 59,996. Caldwell is considered part of the Boise metropolitan area, and is the location of the College of Idaho. The city is located approximately 24 miles (39 km) west of Boise, and approximately 17 miles (27 km) east of the Oregon border. History The present-day location of Caldwell is along a natural passageway to the Inland and Pacific Northwest. Native American tribes from the west coast, north Idaho and as far away as Colorado came to the banks of the Boise River for annual trading fairs, or rendezvous. European and some Hawaiian explorers and traders soon followed the paths left by Native Americans and hopeful emigrants later forged the Oregon Trail and followed those paths to seek a better life in the Oregon Territory. Pioneers of the Trail traveled along the Boise River to Canyon Hill and forded the river close to the Silver Bridge on Plymouth Street. During the Civil War, the discovery of gold in Idaho's mountains brought a variety of new settlers into the area. Many never made it to the mines but settled along the Boise River and run ferries, stage stations, and freighting businesses. These early entrepreneurs created small ranches and farms in the river valleys. Caldwell's inception occurred largely as a result of the construction of the Oregon Short Line Railroad, which connected Wyoming to Oregon through Idaho. Robert E. Strahorn came to the Boise River Valley in 1883 to select a route for the railroad. He rejected the grade into Boise City as too steep and chose a site 30 miles to the west. He drove a stake into an alkali flat of sagebrush and greasewood and the City of Caldwell was platted. Caldwell was named after one of Strahorn's business partners, Alexander Caldwell, a former senator from Kansas. When Caldwell was platted in August 1883, its founder, the Idaho and Oregon Land Improvement Company, started persuading settlers and businessmen to move to the area. Within four months, Caldwell had 600 residents living in 150 dwellings, 40 businesses, a school, a telephone exchange, and two newspapers. On January 15, 1890, the Board of Commissioners of Ada County issued a handwritten order incorporating the City of Caldwell. The College of Idaho was founded in Caldwell in 1891. In 1892, Canyon County was established from a portion of Ada County, and Caldwell was named the county seat. Irrigation canals and waterways were constructed throughout Canyon County, providing the foundation for an agricultural economy. The Oregon Short Line Railroad became part of the larger Union Pacific Railroad network and in 1906 the Caldwell freight and passenger depot was constructed. Caldwell experienced moderate growth as an agricultural processing, commercial retail and educational center during the 20th century. In 2009, the City of Caldwell completed a revitalization project to restore Indian Creek, which runs through downtown Caldwell, but had been used for sewage disposal by local industries and been covered over.

History The present-day location of Caldwell is along a natural passageway to the Inland and Pacific Northwest. Native American tribes from the west coast, north Idaho and as far away as Colorado came to the banks of the Boise River for annual trading fairs, or rendezvous. European and some Hawaiian explorers and traders soon followed the paths left by Native Americans and hopeful emigrants later forged the Oregon Trail and followed those paths to seek a better life in the Oregon Territory. Pioneers of the Trail traveled along the Boise River to Canyon Hill and forded the river close to the Silver Bridge on Plymouth Street. During the Civil War, the discovery of gold in Idaho's mountains brought a variety of new settlers into the area. Many never made it to the mines but settled along the Boise River and run ferries, stage stations, and freighting businesses. These early entrepreneurs created small ranches and farms in the river valleys. Caldwell's inception occurred largely as a result of the construction of the Oregon Short Line Railroad, which connected Wyoming to Oregon through Idaho. Robert E. Strahorn came to the Boise River Valley in 1883 to select a route for the railroad. He rejected the grade into Boise City as too steep and chose a site 30 miles to the west. He drove a stake into an alkali flat of sagebrush and greasewood and the City of Caldwell was platted. Caldwell was named after one of Strahorn's business partners, Alexander Caldwell, a former senator from Kansas. When Caldwell was platted in August 1883, its founder, the Idaho and Oregon Land Improvement Company, started persuading settlers and businessmen to move to the area. Within four months, Caldwell had 600 residents living in 150 dwellings, 40 businesses, a school, a telephone exchange, and two newspapers. On January 15, 1890, the Board of Commissioners of Ada County issued a handwritten order incorporating the City of Caldwell. The College of Idaho was founded in Caldwell in 1891. In 1892, Canyon County was established from a portion of Ada County, and Caldwell was named the county seat. Irrigation canals and waterways were constructed throughout Canyon County, providing the foundation for an agricultural economy. The Oregon Short Line Railroad became part of the larger Union Pacific Railroad network and in 1906 the Caldwell freight and passenger depot was constructed. Caldwell experienced moderate growth as an agricultural processing, commercial retail and educational center during the 20th century. In 2009, the City of Caldwell completed a revitalization project to restore Indian Creek, which runs through downtown Caldwell, but had been used for sewage disposal by local industries and been covered over.

location of the College of Idaho. The city is located approximately 24 miles (39 km) west of Boise, and approximately 17 miles (27 km) east of the Oregon border. History The present-day location of Caldwell is along a natural passageway to the Inland and Pacific Northwest. Native American tribes from the west coast, north Idaho and as far away as Colorado came to the banks of the Boise River for annual trading fairs, or rendezvous. European and some Hawaiian explorers and traders soon followed the paths left by Native Americans and hopeful emigrants later forged the Oregon Trail and followed those paths to seek a better life in the Oregon Territory. Pioneers of the Trail traveled along the Boise River to Canyon Hill and forded the river close to the Silver Bridge on Plymouth Street. During the Civil War, the discovery of gold in Idaho's mountains brought a variety of new settlers into the area. Many never made it to the mines but settled along the Boise River and run ferries, stage stations, and freighting businesses. These early entrepreneurs created small ranches and farms in the river valleys. Caldwell's inception occurred largely as a result of the construction of the Oregon Short Line Railroad, which connected Wyoming to Oregon through Idaho. Robert E. Strahorn came to the Boise River Valley in 1883 to select a route for the railroad. He rejected the grade into Boise City as too steep and chose a site 30 miles to the west. He drove a stake into an alkali flat of sagebrush and greasewood and the City of Caldwell was platted. Caldwell was named after one of Strahorn's business partners, Alexander Caldwell, a former senator from Kansas. When Caldwell was platted in August 1883, its founder, the Idaho and Oregon Land Improvement Company, started persuading settlers and businessmen to move to the area. Within four months, Caldwell had 600 residents living in 150 dwellings, 40 businesses, a school, a telephone exchange, and two newspapers. On January 15, 1890, the Board of Commissioners of Ada County issued a handwritten order incorporating the City of Caldwell. The College of Idaho was founded in Caldwell in 1891. In 1892, Canyon County was established from a portion of Ada County, and Caldwell was named the county seat. Irrigation canals and waterways were constructed throughout Canyon County, providing the foundation for an agricultural economy. The Oregon Short Line Railroad became part of the larger Union Pacific Railroad network and in 1906 the Caldwell freight and passenger depot was constructed. Caldwell experienced moderate growth as an agricultural processing, commercial retail and educational center during the 20th century. In 2009, the City of Caldwell completed a revitalization project to restore Indian Creek, which runs through downtown Caldwell, but had been used for sewage disposal by local industries and been covered over.

metropolitan area. The population was 24,011 at the time of the 2020 census. Kuna is one of the fastest-growing areas in Idaho, having nearly tripled in population between 2000 and 2010 and a nearly additional 60 percent gain between 2010 and 2020. History Kuna originated as a railroad stop with coach transport to Boise. It is popularly believed, as cited by the Kuna Chamber of Commerce, that the translation of the name "Kuna" means "the end of the trail", but Charles S.

History Kuna originated as a railroad stop with coach transport to Boise. It is popularly believed, as cited by the Kuna Chamber of Commerce, that the translation of the name "Kuna" means "the end of the trail", but Charles S. Walgamott cites the origin of the name as a Shoshone Indian word meaning "green leaf, good to smoke." The Western Heritage Historic Byway, designated as a national as well as a state scenic byway, travels around a number of historic sites in the area. Geography Kuna's business center is approximately 18 miles (29 km) southwest of downtown Boise, the state capital. According to the United States Census Bureau, the city has a total area of 18.18 square miles (47.09 km2), of which 18.08 square miles (46.83 km2) is land and 0.10 square miles (0.26 km2) is water. South of Kuna is the Kuna Caves, a lava tube. A small seasonal creek, Indian Creek, runs through the city. It is now used as an irrigation canal, filled by the New York Canal from the Boise River Diversion Dam.

Geography Kuna's business center is approximately 18 miles (29 km) southwest of downtown Boise, the state capital. According to the United States Census Bureau, the city has a total area of 18.18 square miles (47.09 km2), of which 18.08 square miles (46.83 km2) is land and 0.10 square miles (0.26 km2) is water. South of Kuna is the Kuna Caves, a lava tube. A small seasonal creek, Indian Creek, runs through the city. It is now used as an irrigation canal, filled by the New York Canal from the Boise River Diversion Dam. One of the few small floatable waterways in the region, Indian Creek is a favorite swimming spot for local residents. Demographics 2020 census As of the 2020 census, Kuna had a population of 24,011. The median age was 30.9 years. 31.8% of residents were under the age of 18 and 8.1% of residents were 65 years of age or older. For every 100 females there were 97.8 males, and for every 100 females age 18 and over there were 96.2 males age 18 and over. 97.1% of residents lived in urban areas, while 2.9% lived in rural areas. There were 7,736 households in Kuna, of which 48.2% had children under the age of 18 living in them. Of all households, 62.3% were married-couple households, 11.6% were households with a male householder and no spouse or partner present, and 17.4% were households with a female householder and no spouse or partner present. About 13.9% of all households were made up of individuals and 4.6% had someone living alone who was 65 years of age or older. There were 7,948 housing units, of which 2.7% were vacant. The homeowner vacancy rate was 0.8% and the rental vacancy rate was 5.9%. As of the 2020 census, the median income for a household in the city was $68,017. Families had a median income of $75,296 versus $91,364 for married-couple families and $33,512 for nonfamily households.

Professional certification, trade certification, or professional designation, often called simply certification or qualification, is a designation earned by a person to assure qualification to perform a job or task.

A certification is a third-party attestation of an individual's level of knowledge or proficiency in a certain industry or profession. They are granted by authorities in the field, such as professional societies and colleges, or by private certificate-granting agencies. Most certifications are time-limited; some expire after a period of time (e.g., the lifetime of a product that requires certification for use), while others can be renewed indefinitely as long as certain requirements are met. Renewal usually requires ongoing education to remain up-to-date on advancements in the field, evidenced by earning the specified number of continuing education credits (CECs), or continuing education units (CEUs), from approved professional development courses. Certification is different from occupational licensing. In the United States, licenses are typically issued by state agencies, whereas certifications are usually awarded by professional societies or educational institutes. Obtaining a certificate is voluntary in some fields, but in others, certification from a government-accredited agency may be legally required to perform certain jobs or tasks. In other countries, licenses are typically granted by professional societies or universities and require a certificate after about three to five years and so on thereafter. The assessment process for certification may be more comprehensive than that of licensure, though sometimes the assessment process is very similar or even the same, despite differing in terms of legal status. According to The Guide to National Professional Certification Programs (1997) by Phillip Barnhart, "certifications are portable, since they do not depend on one company's definition of a certain job" and they provide potential employers with "an impartial, third-party endorsement of an individual's professional knowledge and experience". Many certification programs are affiliated with professional associations, trade organizations, or private vendors interested in raising industry standards. Certification programs are often created or endorsed by professional associations, but are typically completely independent from membership organizations.

Delivering an assessment based on industry knowledge that is independent from training courses or course providers Granting a time-limited credential to anyone who meets the assessment standards The Institute for Credentialing Excellence (ICE) is a U.S.-based organization that sets standards for the accreditation of personnel certification and certificate programs based on the Standards for Educational and Psychological Testing, a joint publication of the American Educational Research Association (AERA), the American Psychological Association (APA), and the National Council on Measurement in Education (NCME).

A special-use permit authorizes land uses that are allowed and encouraged by the ordinance and declared harmonious with the applicable zoning district. Purpose Land use is governed by a set of regulations generally known as ordinances or municipal codes, which are authorized by the state's zoning enabling law. Within an ordinance is a list of land use designations commonly known as zoning. Each different type of zone has its own set of allowed uses. These are known as by-right uses. Then there is an extra set of uses known as special uses. To build a use that is listed as a special use, a special-use permit (or conditional-use permit) must be obtained. An example of a special-use permit may be found in a church applying for one to construct a church building in a residential neighborhood. Although the church building is not a residential building, the zoning law may allow for churches in the residential neighborhood if the local zoning authority may review the impact on the neighborhood.

US Zoning Model Act The Standard State Zoning Enabling Act allows special-use permits based upon a finding of compatibility with surrounding areas and with developments already permitted under the general provisions of the ordinance. Abuse If the local zoning authority grants a special-use permit that exceeds the discretion allowed to it, then an incidence of spot zoning may arise. Such discretion then may be attacked as ultra vires, and the special-use permit overturned as an unconstitutional violation of equal protection. Special-use permits are also required when a property has been deemed a "nonconforming use." A permit for a nonconforming use will allow the owner of a previously-compliant property to continue the existing use. This often arises when a property has been rezoned or amortized. Amortization is unconstitutional in many states, and is a controversial tool according to many property rights advocacy groups. An example of special-use-permit abuse may be found when a business or other organization is using U.S. Forest Service land for commercial use. Special-use permits may be revoked after the initial period if it is deemed to have not met the proposed public need. This then allows for another operator to apply for the special-use permit which will be evaluated on whether they are likely to succeed and meet the public need as well as follow all other criteria such as proper resource management and respectful public use.

Abuse If the local zoning authority grants a special-use permit that exceeds the discretion allowed to it, then an incidence of spot zoning may arise. Such discretion then may be attacked as ultra vires, and the special-use permit overturned as an unconstitutional violation of equal protection. Special-use permits are also required when a property has been deemed a "nonconforming use." A permit for a nonconforming use will allow the owner of a previously-compliant property to continue the existing use. This often arises when a property has been rezoned or amortized. Amortization is unconstitutional in many states, and is a controversial tool according to many property rights advocacy groups. An example of special-use-permit abuse may be found when a business or other organization is using U.S. Forest Service land for commercial use. Special-use permits may be revoked after the initial period if it is deemed to have not met the proposed public need. This then allows for another operator to apply for the special-use permit which will be evaluated on whether they are likely to succeed and meet the public need as well as follow all other criteria such as proper resource management and respectful public use.

population was 117,635 at the 2020 census, making it the second most populous city in the county and Idaho, after Boise, the state capital.

Irrigation (1890– ) Early settlers arriving in the area came with no knowledge of gravity flow irrigation. Their previous homes were in areas where rain provided the needed moisture to raise crops. Irrigation soon became a necessity, since having a water source was a requirement for receiving the patent for the land from the U.S. Land Office. Irrigation districts, such as the Nampa-Meridian and Settlers irrigation districts, continue to serve the immediate Meridian area. The town was established in 1891 on the Onweiler farm north of the present site and was called Hunter. Two years later an I.O.O.F. lodge was organized and called itself Meridian because it was located on the Boise Meridian, and the town was renamed. The Settlers' Irrigation Ditch, 1892, changed the arid region into a productive farming community which was incorporated in 1902. Village (1903–41) The original Meridian town site was filed in 1893 on homestead grant land belonging to Eliza Ann Zenger. Her husband, Christian, filed the plat with county officials and called it Meridian. The early settlers, many of whom were relatives, left their homes in Missouri to go west, either by wagon, train, or immigrant railroad car, bringing their lodge and church preferences with them. They established local institutions soon after arriving and filed for homestead lands. Meridian was incorporated in 1903. Around the start of the 20th century, settlers established fruit orchards and built fruit packing businesses and prune dryers along the railroad tracks. Local orchards produced many varieties of apples and Italian prunes. Production continued through the mid-1940s when it was no longer profitable and the businesses closed.

Rail transportation (1908–28) Following the raising of $4,000 to lay the Interurban rail line from Onweiler (Meridian and Ustick Roads), the tracks were completed into the village center. Turning east on Broadway and ending at East Second, the last car would spend the night in Meridian before returning to Boise early the next morning with passengers and freight. The interurban Station and Generator building (west one-third of the old library at Meridian and Idaho Streets) was built in 1912, and the line continued on to Nampa via Meridian. The tracks down Broadway were not used after 1912. The Interurban Company entered into receivership and closed in 1928 after 20 years of providing continuous transportation to neighboring towns. It was Meridian's main connection to the area outside the local community. The Union Pacific Railroad spur opened in 1900 and is currently operated by the Boise Valley Railroad.

105, which by 2025 was estimated to have risen to 275,123, making it the second-most populous county in Idaho. The county seat is Caldwell, and its largest city is Nampa. Canyon County is part of the Boise metropolitan area. History Hudson's Bay Company established Fort Boise in 1834 near what is now Parma, but abandoned it in 1855. Emigrants traveled through Canyon County on the Oregon Trail. Discovery of gold in the Boise Basin in 1862 brought settlement to the region again. The lower Boise River was fully contained within Boise County from 1863 until the formation of Ada County in 1864. Settlement of the lower Boise River west of Boise City was limited prior to the completion of the Oregon Short Line Railroad. Middleton was the first European settlement of Canyon County, starting in 1863. The 1870 Census for Ada County listed 76 residents of the Boise Valley, excluding Boise City and the 1880 Census listed 44 residents at Middleton. The arrival of the railroad at Caldwell led to the establishment of a town there as of August 1883. Businessmen James A. McGee and Alexander Duffes filed the plat for nearby Nampa in 1886. Parma was settled around the same time, with the Old Fort Boise post office being moved to the town's location; it was incorporated in 1904. Ada County established precincts for each of the settlements with a combined 1890 Census population of 2,311. Significant settlement of Greenleaf and Notus started around 1904 with the two settlements listed as precincts at the 1910 census. Notus was incorporated in 1921 while Greenleaf was incorporated prior to 1980. Melba was incorporated in 1912 while Wilder was incorporated in 1919. The City of Star annexed a portion of territory in northeast Canyon County prior to 2007, becoming the county's ninth incorporated city. The majority of Star is located within Ada County. The Idaho Legislature created Canyon County from Ada County in an act approved March 7, 1891, effective at the November 26, 1892, election. Caldwell was established as the county seat. The county originally contained all of Canyon and Payette counties and part of Gem; Gem County formed in 1915 and Payette County in 1917.

History Hudson's Bay Company established Fort Boise in 1834 near what is now Parma, but abandoned it in 1855. Emigrants traveled through Canyon County on the Oregon Trail. Discovery of gold in the Boise Basin in 1862 brought settlement to the region again. The lower Boise River was fully contained within Boise County from 1863 until the formation of Ada County in 1864. Settlement of the lower Boise River west of Boise City was limited prior to the completion of the Oregon Short Line Railroad. Middleton was the first European settlement of Canyon County, starting in 1863. The 1870 Census for Ada County listed 76 residents of the Boise Valley, excluding Boise City and the 1880 Census listed 44 residents at Middleton. The arrival of the railroad at Caldwell led to the establishment of a town there as of August 1883. Businessmen James A. McGee and Alexander Duffes filed the plat for nearby Nampa in 1886. Parma was settled around the same time, with the Old Fort Boise post office being moved to the town's location; it was incorporated in 1904. Ada County established precincts for each of the settlements with a combined 1890 Census population of 2,311. Significant settlement of Greenleaf and Notus started around 1904 with the two settlements listed as precincts at the 1910 census. Notus was incorporated in 1921 while Greenleaf was incorporated prior to 1980. Melba was incorporated in 1912 while Wilder was incorporated in 1919. The City of Star annexed a portion of territory in northeast Canyon County prior to 2007, becoming the county's ninth incorporated city. The majority of Star is located within Ada County. The Idaho Legislature created Canyon County from Ada County in an act approved March 7, 1891, effective at the November 26, 1892, election. Caldwell was established as the county seat. The county originally contained all of Canyon and Payette counties and part of Gem; Gem County formed in 1915 and Payette County in 1917.

2000 census As of the 2000 census, there were 131,441 people, 45,018 households and 33,943 families living in the county. The population density was 223 people per square mile (86 people/km2). There were 47,965 housing units at an average density of 81 units per square mile (31 units/km2). The racial makeup of the county was 83.10% White, 0.32% Black or African American, 0.85% Native American, 0.80% Asian, 0.13% Pacific Islander, 12.17% from other races, and 2.62% from two or more races. Hispanic or Latino of any race were 18.61% of the population. 15.9% were of German, 12.7% English, 10.3% American and 7.6% Irish ancestry. There were 45,018 households, of which 39.80% had children under the age of 18 living with them, 60.70% were married couples living together, 10.10% had a female householder with no husband present, and 24.60% were non-families. 19.80% of all households were made up of individuals, and 8.40% had someone living alone who was 65 years of age or older. The average household size was 2.85 and the average family size was 3.28. 30.90% of the population were under the age of 18, 10.70% from 18 to 24, 28.30% from 25 to 44, 19.10% from 45 to 64, and 11.00% who were 65 years of age or older. The median age was 30 years. For every 100 females, there were 98.70 males. For every 100 females age 18 and over, there were 96.30 males. The median household income was $35,884 and the median family income was $40,377. Males had a median income of $29,418 compared with $22,044 for females. The per capita income for the county was $15,155. About 8.70% of families and 12.00% of the population were below the poverty line, including 14.50% of those under age 18 and 10.70% of those age 65 or over. Communities Cities Unincorporated communities Bowmont Huston Roswell Sunnyslope Walters Ferry, Idaho Politics Like the majority of Idaho, Canyon County is reliably Republican by comfortable margins. The last time a Democratic candidate carried the county was in 1936 by Franklin D. Roosevelt.

Eagle is a city in Ada County, Idaho, ten miles (16 km) northwest of downtown Boise. The population was 30,346 at the 2020 census. History 19th century Eagle Island in Idaho was settled in 1863 by Truman Coe Catlin, who later shifted from crop farming to dairy farming, starting the island's dairy tradition. He also pioneered irrigation in the area by constructing a wide irrigation ditch. The most notable early community developer was Thomas Hugh Aiken, a Canadian surveyor, who helped establish the Eagle community in the 1870s.

Parks and recreation The city features numerous parks, including Arboretum Park, Friendship Park, Heritage Park, Orval Krasen Park, Reid W. Merrill Sr. Community Park, and Stephen C. Guerber Park, among others. The Parks and Recreation department offers youth sports leagues, camps, special events (such as Eagle Fun Days), and maintains extensive trails. Nearby Eagle Island State Park provides a swimming beach, trails, disc golf, and winter sports. Education Most of Eagle is in the West Ada School District, with a small portion in the Boise School District. The portion in the Boise School District is zoned to: Shadow Hills Elementary School, Riverglen Middle School, and Capital High School. In popular culture The 2008 show The Baby Borrowers was filmed in Eagle.

20th century The Eagle Fish Hatchery, established in the late 1940s in Idaho, was originally part of a trout program until the 1980s. In 1991, it was restructured to support the conservation of Snake River sockeye salmon, an endangered species listed that year. The hatchery's mission shifted to preserving the species and its genetic diversity through the development of eight broodstocks derived from smolts, anadromous adults, and residual populations.

A local ordinance is a law issued by a local government such as a municipality, county, parish, prefecture, or the like. Hong Kong In Hong Kong, all laws enacted by the territory's Legislative Council remain to be known as Ordinances (Chinese: 條例; Jyutping: tiu4lai6) after the transfer of the territory's sovereignty to China in 1997.

Germany The German Constitution grants the federated states certain exclusive rights including police and public order powers. The 16 state governments delegate many of their responsibilities and powers to local authorities. Local authorities have powers to pass local ordinances (Satzungen) e.g. to determine the use of land, planning questions, public order, emergency and transport issues etc. The ordinance must follow a public disclosure and consultation procedure and then approved by the local assembly as well as the elected representative of the executive (e.g. the mayor). The state authorities or stakeholders, including citizens who can show that they have a sufficiently strong interest to establish standing, may object to the final implementation. If the conflict cannot be resolved, the courts may be asked to rule on whether or not the ordinance is valid or if may strike if it violates state law or the state constitution. Indonesia Japan In Japan, ordinances (条例, jōrei) may be passed by any prefecture or municipality under authority granted by Article 94 of the Constitution. There must generally be a statutory basis for an ordinance, the ordinance must be in compliance with any overlapping statutes (although it may impose a stricter standard or penalty), and the ordinance must be related to the affairs of the local government in question. Ordinances must generally be approved by a local assembly and promulgated by the mayor or governor of the local government in question, who may demand a second vote but may not veto the ordinance. Under the Local Autonomy Law, an ordinance may impose a penalty of up to two years imprisonment and/or 1 million yen in fines, although any penalty under an ordinance must be prescribed in accordance with the Code of Criminal Procedure.

Japan In Japan, ordinances (条例, jōrei) may be passed by any prefecture or municipality under authority granted by Article 94 of the Constitution. There must generally be a statutory basis for an ordinance, the ordinance must be in compliance with any overlapping statutes (although it may impose a stricter standard or penalty), and the ordinance must be related to the affairs of the local government in question. Ordinances must generally be approved by a local assembly and promulgated by the mayor or governor of the local government in question, who may demand a second vote but may not veto the ordinance. Under the Local Autonomy Law, an ordinance may impose a penalty of up to two years imprisonment and/or 1 million yen in fines, although any penalty under an ordinance must be prescribed in accordance with the Code of Criminal Procedure.