Buoyant apparatus with plastic foam buoyancy.

§ 160.010–5 Buoyant apparatus with plastic foam buoyancy. (a) Buoyant apparatus with plastic foam buoyancy must have a plastic foam body with an external protective covering. The body may be reinforced as necessary to meet the tests in § 160.010–7. (b) Plastic foam used in the construction of buoyant apparatus must be a unicellular type accepted by the Commandant (CG–ENG–4) as meeting one of the following: (1) Subpart 164.015 of this chapter. (2) MIL–P–19644C (incorporated by reference, see § 160.010–1 of this subpart). (3) MIL–P–21929B (incorporated by reference, see § 160.010–1 of this subpart). (4) MIL–P–40619A (incorporated by reference, see § 160.010–1 of this subpart). (c) The external protective covering must be— (1) Fibrous-glass-reinforced plastic, constructed of a polyester resin listed on the current Qualified Products List for MIL–P–21607E(SH) (incorporated by reference, see § 160.010–1 of this subpart), or accepted by the Commandant (CG–ENG–4) as meeting MIL-P-21607; (2) Elastomeric vinyl accepted by the Commandant (CG–ENG–4) as meeting § 160.055–3(j) of this chapter; or (3) Any other material accepted by the Commandant (CG–ENG–4) as providing equivalent protection for the body of the apparatus. [CGD 79–167, 47 FR 41372, Sept. 20, 1982, as amended by CGD 95–072, 60 FR 50466, Sept. 29, 1995; CGD 96–041, 61 FR 50733, Sept. 27, 1996. Redesignated by CGD 85–205, 62 FR 25545, May 9, 1997, as amended by USCG–2009–0702, 74 FR 49237, Sept. 25, 2009; USCG–2010–0048, 76 FR 62975, Oct. 11, 2011]