Security Services ↔ relates to ↔ Construction

States Department of Labor that originally had federal visitorial powers to inspect and examine workplaces. The United States Congress established the agency under the Occupational Safety and Health Act (OSH Act), which President Richard M. Nixon signed into law on December 29, 1970. OSHA's mission is to "assure safe and healthy working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education, and assistance". The agency is also charged with enforcing a variety of whistleblower statutes and regulations.

History From its creation in 1934, the Bureau of Labor Standards of the Department of Labor addressed some work safety issues. The economic boom and associated labor turnover during World War II worsened work safety in nearly all areas of the United States economy, but after 1945 accidents again declined as long-term forces reasserted themselves. Additionally, new and powerful labor unions played an increasingly important role in worker safety post-World War II. In the 1960s, increasing economic expansion again led to rising injury rates, and the resulting political pressures led Congress to establish the Occupational Safety and Health Administration (OSHA) on April 28, 1971, the date that the Occupational Health and Safety Act became effective. The new agency incorporated much of what had been the original Bureau of Labor Standards. George Guenther was appointed by Labor Secretary James D. Hodgson as the agency's first director. OSHA has run a number of training, compliance assistance, and health and safety recognition programs throughout its history. The OSHA Training Institute, which trains government and private sector health and safety personnel, began in 1972. In 1978, the agency began a grant-making program, now called the Susan Harwood Training Grant Program, to train workers and employers in reducing workplace hazards.

OSH Act coverage The OSH Act covers most private-sector employers and their workers, in addition to some public-sector employers and workers in the 50 states and certain territories and jurisdictions under federal authority. Those jurisdictions include the District of Columbia, Puerto Rico, the Virgin Islands, American Samoa, Guam, Northern Mariana Islands, Wake Island, Johnston Island, and the Outer Continental Shelf Lands as defined in the Outer Continental Shelf Lands Act. Private sector employers The OSH Act covers most private sector employers in all 50 states, the District of Columbia, and other U.S. jurisdictions—either directly through federal OSHA or through an OSHA-approved state plan. State plans are OSHA-approved job safety and health programs operated by individual states instead of federal OSHA. Federal OSHA approves and monitors all state plans and provides as much as fifty percent of the funding for each program.

Apprenticeship is a system for training potential new practitioners of a trade or profession with on-the-job training and often some accompanying study. Apprenticeships may also enable practitioners to gain a license to practice in a regulated occupation. Most of their training is done while working for an experienced employer who helps the apprentices learn their trade or profession, in exchange for their continued labor for an agreed period after they have achieved measurable competencies. Apprenticeship lengths vary significantly across sectors, professions, roles and cultures. In some cases, people who successfully complete an apprenticeship can reach the "journeyman" or professional certification level of competence. In other cases, they can be offered a permanent job at the company that provided the placement.

ing for an experienced employer who helps the apprentices learn their trade or profession, in exchange for their continued labor for an agreed period after they have achieved measurable competencies. Apprenticeship lengths vary significantly across sectors, professions, roles and cultures. In some cases, people who successfully complete an apprenticeship can reach the "journeyman" or professional certification level of competence. In other cases, they can be offered a permanent job at the company that provided the placement.

period after they have achieved measurable competencies. Apprenticeship lengths vary significantly across sectors, professions, roles and cultures. In some cases, people who successfully complete an apprenticeship can reach the "journeyman" or professional certification level of competence. In other cases, they can be offered a permanent job at the company that provided the placement.

. In Canada, national model codes are published by the National Research Council of Canada. In the United Kingdom, compliance with Building Regulations is monitored by building control bodies, either Approved Inspectors or Local Authority Building Control departments.

o consider the effects of soil liquefaction in the design of new buildings. The building code becomes law of a particular jurisdiction when formally enacted by the appropriate governmental or private authority. Building codes are generally intended to be applied by architects, engineers, interior designers, constructors and regulators but are also used for various purposes by safety inspectors, environmental scientists, real estate developers, subcontractors, manufacturers of building products and materials, insurance companies, facility managers, tenants, and others. Codes regulate the design and construction of structures where adopted into law. Examples of building codes began in ancient times. In the USA the main codes are the International Building Code or International Residential Code [IBC/IRC], electrical codes and plumbing, mechanical codes. Fifty states and the District of Columbia have adopted the I-Codes at the state or jurisdictional level. In Canada, national model codes are published by the National Research Council of Canada. In the United Kingdom, compliance with Building Regulations is monitored by building control bodies, either Approved Inspectors or Local Authority Building Control departments.

Types The practice of developing, approving, and enforcing building codes varies considerably among nations. In some countries building codes are developed by the government agencies or quasi-governmental standards organizations and then enforced across the country by the central government. Such codes are known as the national building codes (in a sense they enjoy a mandatory nationwide application). In other countries, where the power of regulating construction and fire safety is vested in local authorities, a system of model building codes is used. Model building codes have no legal status unless adopted or adapted by an authority having jurisdiction. The developers of model codes urge public authorities to reference model codes in their laws, ordinances, regulations, and administrative orders. When referenced in any of these legal instruments, a particular model code becomes law. This practice is known as 'adoption by reference'. When an adopting authority decides to delete, add, or revise any portions of the model code adopted, it is usually required by the model code developer to follow a formal adoption procedure in which those modifications can be documented for legal purposes. There are instances when some local jurisdictions choose to develop their own building codes. At some point in time all major cities in the United States had their own building codes. However, due to ever increasing complexity and cost of developing building regulations, virtually all municipalities in the country have chosen to adopt model codes instead. For example, in 2008 New York City abandoned its proprietary 1968 New York City Building Code in favor of a customized version of the International Building Code. The City of Chicago remains the only municipality in America that continues to use a building code the city developed on its own as part of the Municipal Code of Chicago. In Europe, the Eurocode: Basis of structural design, is a pan-European building code that has superseded the older national building codes. Each country now has National Annexes to localize the contents of the Eurocodes. Similarly, in India, each municipality and urban development authority has its own building code, which is mandatory for all construction within their jurisdiction.

ern Oregon to Boise, and is the most populated area in Idaho. Historically, the valley had been known as the Lower Snake River Valley or the Boise River Valley. Pete Olesen, president of the valley's association of local Chambers of Commerce, coined the name "Treasure Valley" in 1959 to reflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas.

The Treasure Valley is a valley in the western United States, primarily in southwestern Idaho, where the Payette, Boise, Weiser, Malheur, and Owyhee rivers drain into the Snake River. It includes all the lowland areas from Vale in rural eastern Oregon to Boise, and is the most populated area in Idaho. Historically, the valley had been known as the Lower Snake River Valley or the Boise River Valley. Pete Olesen, president of the valley's association of local Chambers of Commerce, coined the name "Treasure Valley" in 1959 to reflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas.

eflect the treasure chest of resources and opportunities that the region offered. The valley has a very diverse terrain, from sage flatlands, to mesas, agricultural areas, and urbanized areas. As the Boise Metropolitan Area grows, more and more undeveloped and agricultural land is being urbanized. History Settling the region The tribes that roamed the area, specifically, were the Northern Paiute and Shoshone. In 1834, Thomas McKay built the original Fort Boise, in the area near present-day Parma, which was run for a time by Francois Payette. It later was moved because of flooding troubles and was abandoned in 1854. The Oregon Trail runs through the Treasure Valley. The valley was settled for the most part by ranchers and farmers, initially to supply the gold and silver mining communities in the higher elevations nearby: Idaho City in the Boise Basin and Silver City in the Owyhees. A new Fort Boise was constructed by the U.S. Army in 1863 in present-day Boise, from which the city grew.

population was 117,635 at the 2020 census, making it the second most populous city in the county and Idaho, after Boise, the state capital.

Irrigation (1890– ) Early settlers arriving in the area came with no knowledge of gravity flow irrigation. Their previous homes were in areas where rain provided the needed moisture to raise crops. Irrigation soon became a necessity, since having a water source was a requirement for receiving the patent for the land from the U.S. Land Office. Irrigation districts, such as the Nampa-Meridian and Settlers irrigation districts, continue to serve the immediate Meridian area. The town was established in 1891 on the Onweiler farm north of the present site and was called Hunter. Two years later an I.O.O.F. lodge was organized and called itself Meridian because it was located on the Boise Meridian, and the town was renamed. The Settlers' Irrigation Ditch, 1892, changed the arid region into a productive farming community which was incorporated in 1902. Village (1903–41) The original Meridian town site was filed in 1893 on homestead grant land belonging to Eliza Ann Zenger. Her husband, Christian, filed the plat with county officials and called it Meridian. The early settlers, many of whom were relatives, left their homes in Missouri to go west, either by wagon, train, or immigrant railroad car, bringing their lodge and church preferences with them. They established local institutions soon after arriving and filed for homestead lands. Meridian was incorporated in 1903. Around the start of the 20th century, settlers established fruit orchards and built fruit packing businesses and prune dryers along the railroad tracks. Local orchards produced many varieties of apples and Italian prunes. Production continued through the mid-1940s when it was no longer profitable and the businesses closed.

Rail transportation (1908–28) Following the raising of $4,000 to lay the Interurban rail line from Onweiler (Meridian and Ustick Roads), the tracks were completed into the village center. Turning east on Broadway and ending at East Second, the last car would spend the night in Meridian before returning to Boise early the next morning with passengers and freight. The interurban Station and Generator building (west one-third of the old library at Meridian and Idaho Streets) was built in 1912, and the line continued on to Nampa via Meridian. The tracks down Broadway were not used after 1912. The Interurban Company entered into receivership and closed in 1928 after 20 years of providing continuous transportation to neighboring towns. It was Meridian's main connection to the area outside the local community. The Union Pacific Railroad spur opened in 1900 and is currently operated by the Boise Valley Railroad.

employers in the technology, manufacturing, and service sectors, including companies such as Micron Technology and Hewlett-Packard. The city is home to the Boise Art Museum, Idaho State Capitol, the annual Treefort Music Fest, and the Basque Block. History Etymology The origin of the name is uncertain. One account credits Capt. B. L. E. Bonneville of the U.S. Army as its source. After trekking for weeks through dry and rough terrain, his exploration party reached an overlook with a view of the Boise River Valley. The place where they stood is called Bonneville Point, located on the Oregon Trail east of the city. According to the story, a French-speaking guide, overwhelmed by the sight of the verdant river, yelled "Les bois! Les bois!" ("The woods! The woods!")—and the name stuck. The name may also derive from earlier mountain men who named the river that flows through the city. In the 1820s, French Canadian fur trappers associated with the British-owned Hudson's Bay Company set trap lines in the vicinity. Set in a high-desert area, the tree-lined valley of the Boise River became a distinct landmark, an oasis dominated by cottonwood trees.

Tribes and First Contact The area of Boise valley was inhabited by Boise Valley Shoshone and Bannock tribes, a part of the "Snake Country". According to the City of Boise's "History of Boise" report, "they gathered annually in the valley to participate in trading rendezvous with other tribes and catch salmon in the Boise River runs to help sustain them year-round. They spent winters in the valley where the climate was milder and visited the hot springs for bathing and healing. Castle Rock, called Eagle Rock by the tribes, was and remains a sacred site." Boise Valley Bannock tribes belonged to the "tuuˀagaidɨkaˀa" (black trout eaters). Boise Valley Shoshone belonged to the "Yahandeka" (groundhog eaters) grouping. They were among the early mounted Shoshone bands. They traveled over a considerable range by the beginning of the nineteenth century, with their main hunting lands along the lower Boise River and Payette River. When Donald MacKenzie developed the Snake country fur trade after 1818, the most prominent of the Boise Shoshone, Peiem (a Shoshoni rendition of "Big Jim", their leader's English name), became the most influential leader of the large composite Shoshoni band that white trappers regularly encountered in the Snake Country. In 1811, Wilson Hunt, employed as an agent in the fur trade under John Jacob Astor, organized and led the greater part of a group of about 60 men on an overland expedition to establish a fur trading outpost at the mouth of the Columbia River. This expedition passed through the Boise valley, and was the first ever time a white American has entered the region. Because of the War of 1812 and the lack of U.S. fur trading posts in the Pacific Northwest, most of the route was not used in the following two decades, and thus Snake Country remained free of settler incursions. After the conclusion of the war of 1812, until the 1840s, Oregon, while officially "jointly administered", was solely dominated by the British Hudson's Bay Company (HBC), which had a land connection to the inland of the Canadian Prairies via York Factory Express. Snake Country, including Boise Valley remained independent and relatively free of settler passage and incursion. There were two main reasons for this. Firstly, the general region east of the Cascades and west of the Rockies was described at the time in the media and literature of the eastern US as the "Great American Desert", an arid unproductive region, unsuitable for habitation. This discouraged settlers from traveling to the region of Boise; however, Oregon Country, on the other side of the Cascades, was a desirable destination for them. Nevertheless, the British had an official policy of discouraging American settlers, and settler incursions into Boise Valley along the Oregon Trail remained low until the early 1840s. The HBC established a fort in the region, the Old Fort Boise, 40 miles (64 km) west, near Parma, down the Boise River near its confluence with the Snake River at the Oregon border.

The North End, generally defined as the part of Boise north of State Street, contains many of the city's older homes. It is known for its tree-lined drives such as Harrison Boulevard, and for its quiet neighborhoods near the downtown area. Downtown Boise is visible from Camel's Back Park. On 13th Street, Hyde Park is home to restaurants and other businesses. The North End also hosts events such as the annual Hyde Park Street Fair. In 2008, the American Planning Association designated Boise's North End one of 10 Great Neighborhoods. Boise Highlands The Boise Highlands is just north of the North End; its location is generally defined as north of Hill Road and east of Bogus Basin Road.

rapid advances in fabrication technology leading to the exponential growth in semiconductor device production, known as Moore's law that has persisted over the past six or so decades. The industry's annual semiconductor sales revenue has since grown to over $481 billion, as of 2018. In 2010, the semiconductor industry had the highest intensity of Research & Development in the EU and ranked second after Biotechnology in the EU, United States and Japan combined. The semiconductor industry is in turn the driving force behind the wider electronics industry, with annual power electronics sales of £135 billion ($216 billion) as of 2011, annual consumer electronics sales expected to reach $2.9 trillion by 2020, tech industry sales expected to reach $5 trillion in 2019, and e-commerce with over $29 trillion in 2017. In 2019, 32.4% of the semiconductor market segment was for networks and communications devices. In 2021, the sales of semiconductors reached a record $555.9 billion, up 26.2%, with sales in China reaching $192.5 billion, according to the Semiconductor Industry Association. A record 1.15 trillion semiconductor units were shipped in the calendar year.

pment in the EU and ranked second after Biotechnology in the EU, United States and Japan combined. The semiconductor industry is in turn the driving force behind the wider electronics industry, with annual power electronics sales of £135 billion ($216 billion) as of 2011, annual consumer electronics sales expected to reach $2.9 trillion by 2020, tech industry sales expected to reach $5 trillion in 2019, and e-commerce with over $29 trillion in 2017. In 2019, 32.4% of the semiconductor market segment was for networks and communications devices. In 2021, the sales of semiconductors reached a record $555.9 billion, up 26.2%, with sales in China reaching $192.5 billion, according to the Semiconductor Industry Association. A record 1.15 trillion semiconductor units were shipped in the calendar year.

Industry structure The global semiconductor industry is dominated by companies from the United States, Taiwan, South Korea, Japan and the Netherlands, with Israel and Germany having significant presence in the field. Unique features of the industry include continuous growth but in a cyclical pattern with high market fluctuation over the short run. While the current 20-year annual average growth of the semiconductor industry is on the order of 13%, this has been accompanied by equally above-average market volatility, which can lead to significant if not dramatic cyclical swings. This has required the need for high degrees of flexibility and innovation in order to constantly adjust to the rapid pace of change in the market as many products embedding semiconductor devices often have a very short life cycle. At the same time, the rate of constant price-performance improvement in the semiconductor industry is staggering. As a consequence, changes in the semiconductor market not only occur extremely rapidly but also anticipate changes in industries evolving at a slower pace. The semiconductor industry is widely recognized as a key driver and technology enabler for the whole electronics value chain. Prior to the 1980s, the semiconductor industry was vertically integrated. Semiconductor companies both designed and manufactured chips in their own facilities. In many cases, this included inventing new processes, refining and purifying source chemicals and silicon wafers, and even manufacturing equipment, like furnaces, lithography tools and etchers. These companies also carried out the assembly and testing of their chips. Over time, many of these functions were outsourced, such that today semiconductor manufacturers rely on a complex supply chain to provide wafers, high-purity source chemicals, and processing equipment. Further, starting with LSI in 1969, the industry has seen the emergence of Fabless Semiconductor Companies that focus solely on chip design and rely on other companies to manufacture their designs. Initially, these other companies were integrated device manufacturers (IDMs), companies that also designed and manufactured their own products, and thus were often competitors of the Fabless companies. But, by the mid-1980's TSMC and UMC emerged as foundries, specializing solely in the manufacture of other companies' designs. Today, much of the industry is based on the foundry model, which consists of semiconductor fabrication plants (foundries) and integrated circuit design operations, each belonging to separate companies or subsidiaries. Some companies, known as integrated device manufacturers, both design and manufacture semiconductors. The foundry model has resulted in consolidation among foundries. As of 2021, only three firms are able to manufacture the most advanced semiconductors: TSMC of Taiwan, Samsung of South Korea, and Intel of the United States. Part of this is due to the high capital costs of building foundries. TSMC's latest factory, capable of fabricating 3 nm process semiconductors and completed in 2020, cost $19.5 billion. Intel is considering outsourcing some production to TSMC. It currently can only produce 10 nm semiconductors, while TSMC and Samsung can both produce 5 nm.

lated activities concerned with protecting construction site workers and others from death, injury, disease or other health-related risks. Construction is an often hazardous, predominantly land-based activity where site workers may be exposed to various risks, some of which remain unrecognized. Site risks can include working at height, moving machinery (vehicles, cranes, etc.) and materials, power tools and electrical equipment, hazardous substances, plus the effects of excessive noise, dust and vibration.

Road construction sites are blocked off and traffic is redirected. The sites and vehicles are protected by signs and barricades. However, sometimes even these signs and barricades can be a hazard to vehicle traffic. For example, improperly designed barricades can cause cars that strike them to roll over or even be thrown into the air. Even a simple safety sign can penetrate the windshield or roof of a car if it strikes from certain angles. The majority of deaths in construction are caused by hazards relating to construction activity. However, many deaths are also caused by non construction activities, such as electrical hazards. Construction safety research in academia Construction safety has been considered as a hot topic in academic research. As per the latest research. the largest number of published construction safety documents were published by scholars from the US and China; the total number of published articles by these two countries was 1,125, at 56% of the 2000 articles that were published. Both countries showed high levels of research collaboration. While the results suggest that economic development may drive academic construction safety research, there has been an increase in construction safety research conducted by developing countries in recent years, probably due to an improvement in their economic development. While authors' keywords evidenced the popularity of research on safety management and climate, the network analysis on all keywords, i.e. keywords given by Web of Science and authors, suggest that construction safety research focused on three areas: construction safety management, the relationship between people and construction safety, and the protection and health of workers' impact on construction safety. There is a new interdisciplinary research trend where construction safety combines with digital technologies, with the largest number involving deep learning.

ht, moving machinery (vehicles, cranes, etc.) and materials, power tools and electrical equipment, hazardous substances, plus the effects of excessive noise, dust and vibration. The leading causes of construction site fatalities are falls, electrocutions, crush injuries, and caught-between injuries. Overview According to the International Labour Organization, construction has a disproportionately high rate of recorded accidents. In 2019, the ILO said the top causes of occupational fatalities on construction sites were falls, electrocution, crush injuries, and caught-between injuries. Although construction sites face significantly the same hazards, the rate of accidents varies in different regions and countries due to a variety of safety cultures and workers' behavioral safety. Construction incurs more occupational fatalities than any other sector in both the United States and in the European Union. In the US in 2019, 1,061, or about 20%, of worker fatalities in private industry occurred in construction. Construction has about 6% of US workers, but 17% of the fatalities - the largest number of fatalities reported for any industry sector. In the United Kingdom, the construction industry is responsible for 31% of fatalities at work and 10% of major workplace injuries. In South Africa there are 150 fatalities and approximately 400 injuries each year related to construction sites. In Brazil, the incidence rate for all occupational fatalities is 3.6 per 100,000. Little to no information regarding construction fatalities could be found in Asia, South American, Africa, and the Antarctica.

105, which by 2025 was estimated to have risen to 275,123, making it the second-most populous county in Idaho. The county seat is Caldwell, and its largest city is Nampa. Canyon County is part of the Boise metropolitan area. History Hudson's Bay Company established Fort Boise in 1834 near what is now Parma, but abandoned it in 1855. Emigrants traveled through Canyon County on the Oregon Trail. Discovery of gold in the Boise Basin in 1862 brought settlement to the region again. The lower Boise River was fully contained within Boise County from 1863 until the formation of Ada County in 1864. Settlement of the lower Boise River west of Boise City was limited prior to the completion of the Oregon Short Line Railroad. Middleton was the first European settlement of Canyon County, starting in 1863. The 1870 Census for Ada County listed 76 residents of the Boise Valley, excluding Boise City and the 1880 Census listed 44 residents at Middleton. The arrival of the railroad at Caldwell led to the establishment of a town there as of August 1883. Businessmen James A. McGee and Alexander Duffes filed the plat for nearby Nampa in 1886. Parma was settled around the same time, with the Old Fort Boise post office being moved to the town's location; it was incorporated in 1904. Ada County established precincts for each of the settlements with a combined 1890 Census population of 2,311. Significant settlement of Greenleaf and Notus started around 1904 with the two settlements listed as precincts at the 1910 census. Notus was incorporated in 1921 while Greenleaf was incorporated prior to 1980. Melba was incorporated in 1912 while Wilder was incorporated in 1919. The City of Star annexed a portion of territory in northeast Canyon County prior to 2007, becoming the county's ninth incorporated city. The majority of Star is located within Ada County. The Idaho Legislature created Canyon County from Ada County in an act approved March 7, 1891, effective at the November 26, 1892, election. Caldwell was established as the county seat. The county originally contained all of Canyon and Payette counties and part of Gem; Gem County formed in 1915 and Payette County in 1917.

History Hudson's Bay Company established Fort Boise in 1834 near what is now Parma, but abandoned it in 1855. Emigrants traveled through Canyon County on the Oregon Trail. Discovery of gold in the Boise Basin in 1862 brought settlement to the region again. The lower Boise River was fully contained within Boise County from 1863 until the formation of Ada County in 1864. Settlement of the lower Boise River west of Boise City was limited prior to the completion of the Oregon Short Line Railroad. Middleton was the first European settlement of Canyon County, starting in 1863. The 1870 Census for Ada County listed 76 residents of the Boise Valley, excluding Boise City and the 1880 Census listed 44 residents at Middleton. The arrival of the railroad at Caldwell led to the establishment of a town there as of August 1883. Businessmen James A. McGee and Alexander Duffes filed the plat for nearby Nampa in 1886. Parma was settled around the same time, with the Old Fort Boise post office being moved to the town's location; it was incorporated in 1904. Ada County established precincts for each of the settlements with a combined 1890 Census population of 2,311. Significant settlement of Greenleaf and Notus started around 1904 with the two settlements listed as precincts at the 1910 census. Notus was incorporated in 1921 while Greenleaf was incorporated prior to 1980. Melba was incorporated in 1912 while Wilder was incorporated in 1919. The City of Star annexed a portion of territory in northeast Canyon County prior to 2007, becoming the county's ninth incorporated city. The majority of Star is located within Ada County. The Idaho Legislature created Canyon County from Ada County in an act approved March 7, 1891, effective at the November 26, 1892, election. Caldwell was established as the county seat. The county originally contained all of Canyon and Payette counties and part of Gem; Gem County formed in 1915 and Payette County in 1917.

2000 census As of the 2000 census, there were 131,441 people, 45,018 households and 33,943 families living in the county. The population density was 223 people per square mile (86 people/km2). There were 47,965 housing units at an average density of 81 units per square mile (31 units/km2). The racial makeup of the county was 83.10% White, 0.32% Black or African American, 0.85% Native American, 0.80% Asian, 0.13% Pacific Islander, 12.17% from other races, and 2.62% from two or more races. Hispanic or Latino of any race were 18.61% of the population. 15.9% were of German, 12.7% English, 10.3% American and 7.6% Irish ancestry. There were 45,018 households, of which 39.80% had children under the age of 18 living with them, 60.70% were married couples living together, 10.10% had a female householder with no husband present, and 24.60% were non-families. 19.80% of all households were made up of individuals, and 8.40% had someone living alone who was 65 years of age or older. The average household size was 2.85 and the average family size was 3.28. 30.90% of the population were under the age of 18, 10.70% from 18 to 24, 28.30% from 25 to 44, 19.10% from 45 to 64, and 11.00% who were 65 years of age or older. The median age was 30 years. For every 100 females, there were 98.70 males. For every 100 females age 18 and over, there were 96.30 males. The median household income was $35,884 and the median family income was $40,377. Males had a median income of $29,418 compared with $22,044 for females. The per capita income for the county was $15,155. About 8.70% of families and 12.00% of the population were below the poverty line, including 14.50% of those under age 18 and 10.70% of those age 65 or over. Communities Cities Unincorporated communities Bowmont Huston Roswell Sunnyslope Walters Ferry, Idaho Politics Like the majority of Idaho, Canyon County is reliably Republican by comfortable margins. The last time a Democratic candidate carried the county was in 1936 by Franklin D. Roosevelt.