7 C.F.R. · Agriculture
7 C.F.R. § 51.1859

Size.

Title 7 C.F.R. ● ACTIVE Primary Source
Regulatory Text

7 C.F.R. § 51.1859 — Size.

§ 51.1859 Size. (a) The size of tomatoes packed in any standard type shipping container shall be specified and marked according to one of the size designations set forth in Table I. Individual containers shall not be marked with more than one size designation. Consumer packages and their master container are exempt; however, if they are marked, the same requirements would apply. (1) When containers are marked in accordance with Table I, the markings on at least 85 percent of the containers in a lot must be legible. (2) In determining compliance with the size designations, the measurement for minimum diameter shall be the largest diameter of the tomato measured at right angles to a line from the stem end to the blossom end. The measurement for maximum diameter shall be the smallest dimension of the tomato determined by passing the tomato through a round opening in any position. (b) In lieu of marking containers in accordance with paragraph (a) of this section or specifying size in accordance with the dimensions defined in Table I, for Cerasiforme type tomatoes commonly referred to as cherry tomatoes and Pyriforme type tomatoes commonly referred to as pear shaped tomatoes, and other similar types, size may be specified in terms of minimum diameter or minimum and maximum diameter expressed in whole inches, and not less than thirty-second inch fractions thereof, or millimeters in accordance with the facts. (1) Tomatoes of these types are exempt from marking requirements. However, when marked to a minimum or minimum and maximum diameter, the markings on at least 85 percent of the containers in a lot must be legible. (c) For tolerances see § 51.1861. Table I Size designation Inches Minimum diameter  1 Maximum diameter  2 Small 2 4/32 2 9/32 Medium 2 8/32 2 17/32 Large 2 16/32 2 25/32 Extra large 2 24/32 1  Will not pass through a round opening of the designated diameter when tomato is placed with the greatest transverse diameter across the opening. 2  Will pass through a round opening of the designated diameter in any position. [56 FR 21915, May 13, 1991; 56 FR 32474, July 16, 1991] Color Classification

Source: ecfr.gov · govinfo.gov — public domain Official Source ↗
Root-LD Entity Data
◈ Machine-Readable Provenance Record Root-LD v1.0 · boisestandard.org
Federation ID
BS-CFR07-SEC-53A8BE
Entity Class
REGULATION / FEDERAL-CFR-SECTION
Domain Signature
boisestandard.org
Citation
7 C.F.R. § 51.1859
Corpus
CFR — Code of Federal Regulations
Status
✓ ACTIVE
Source
PRIMARY-SOURCE
Source Verified
✓ TRUE
Content Hash
561a7dc3cd67f23f...
Semantic Edges
Pending — corpus passes queued
The regulatory text of 7 C.F.R. § 51.1859 is reproduced from the official Code of Federal Regulations as published by the Office of the Federal Register and the National Archives and Records Administration.
Navigate Corpus — Title 7 C.F.R.
◈ Provenance
boisestandard.org United States Law CFR Title 7 7 C.F.R. § 51.1859