Regulatory Text
30 C.F.R. § 75.1436 — Drum end attachment.
§ 75.1436 Drum end attachment. (a) For drum end attachment, wire rope shall be attached— (1) Securely by clips after making one full turn around the drum spoke; (2) Securely by clips after making one full turn around the shaft, if the drum is fixed to the shaft; or (3) By properly assembled anchor bolts, clamps, or wedges, provided that the attachment is a design feature of the hoist drum. Design feature means either the manufacturer's original design or a design approved by a registered professional engineer. (b) A minimum of three full turns of wire rope shall be on the drum when the rope is extended to its maximum working length.
Source: ecfr.gov · govinfo.gov — public domain
Official Source ↗
Root-LD Entity Data
◈ Machine-Readable Provenance Record
Root-LD v1.0 · boisestandard.org
Federation ID
BS-CFR30-SEC-184DE6
Entity Class
REGULATION / FEDERAL-CFR-SECTION
Domain Signature
boisestandard.org
Citation
30 C.F.R. § 75.1436
Corpus
CFR — Code of Federal Regulations
Status
✓ ACTIVE
Source
PRIMARY-SOURCE
Source Verified
✓ TRUE
Content Hash
8c680e0e80fdb89a...
Semantic Edges
Pending — corpus passes queued
The regulatory text of 30 C.F.R. § 75.1436 is reproduced from the official Code of Federal Regulations as published by the Office of the Federal Register and the National Archives and Records Administration.
Navigate Corpus — Title 30 C.F.R.
Title 30 — Mineral Resources
30 C.F.R. § 1.130 C.F.R. § 1.230 C.F.R. § 1.330 C.F.R. § 3.130 C.F.R. § 5.1030 C.F.R. § 5.3030 C.F.R. § 5.4030 C.F.R. § 5.5030 C.F.R. § 6.130 C.F.R. § 6.230 C.F.R. § 6.1030 C.F.R. § 6.2030 C.F.R. § 6.3030 C.F.R. § 7.130 C.F.R. § 7.230 C.F.R. § 7.330 C.F.R. § 7.430 C.F.R. § 7.530 C.F.R. § 7.630 C.F.R. § 7.730 C.F.R. § 7.830 C.F.R. § 7.930 C.F.R. § 7.1030 C.F.R. § 7.2130 C.F.R. § 7.2230 C.F.R. § 7.2330 C.F.R. § 7.2430 C.F.R. § 7.2530 C.F.R. § 7.2630 C.F.R. § 7.27
30 C.F.R. — public domain
← All Legislation