Initiating development of a new standard.

§ 10.1 Initiating development of a new standard. (a) Any group or association of producers, distributors, users, or consumers, or a testing laboratory, or a State or Federal agency, may request the Department to initiate the development and publication of a Voluntary Product Standard under these procedures. Requests shall be in writing, signed by a representative of the group or agency, and forwarded to the Department. The initial request may be accompanied by a copy of a draft of the suggested standard. (b) The request shall include a commitment to provide sufficient funding to cover all costs associated with the development and maintenance of the proposed Voluntary Product Standard. (c) The Department may require additional information such as technical, marketing, or other appropriate data essential to discussion and development of the proposed standard, including, but not limited to, physical, mechanical, chemical, or performance characteristics, and production figures. (d) Upon receipt of an appropriate request and after a determination by the Department that the development of a Voluntary Product Standard is justified, the Department may initiate the development by requesting that a draft of the suggested standard be prepared by an appropriate committee, provided such a draft has not previously been submitted under paragraph (a) of this section. (e) The Department may initiate the development of a Voluntary Product Standard, if such action is deemed by the Department to be in the public interest, notwithstanding the absence of a request from an outside source. A voluntary standard initiated by the Department shall be processed in accordance with all requirements of these procedures and shall be developed in the same manner as a voluntary standard initiated by any group referred to in paragraph (a) of this section. (f) An agreement regarding funding procedures and receipt of a deposit estimated by the Department to be sufficient to cover the first year's costs shall occur prior to the initiation of any project.