1-15-8-4: SUBMITTAL REQUIREMENTS:

All design review plans and drawings shall be prepared by an Idaho licensed architect, or as approved by the building official.

   A.   Materials Waived: The materials required in this section may be waived by the Administrator after administrative review of the application should no need be found therefor.

   B.   Vicinity Map: A vicinity map in sufficient detail to show the location of the proposed construction within the City and in relation to adjacent properties, buildings, roads, streams and other public easements and rights-of-way.

   C.   Site Plan: A site plan of the property upon which construction is proposed in sufficient detail to show the following:

      1.   Exterior boundary lines of the property together with dimensions;

      2.   Location of the proposed and existing structures with dimensions showing the setback of each structure from the nearest property line and a statement indicating the percentage of the lot coverage by proposed building and parking areas together with the total square footage of the parcel of property;

      3.   Location of on site parking spaces and access including the dimensions of the spaces and the width and length of access;

      4.   Location of dumpster and/or garbage and recycling storage areas including the dimensions and proposed fencing or other screening;

      5.   Designation of the zoning district in which the project is located and the location of any zoning district boundary line within the proposed project or the immediate vicinity thereof;

      6.   Location of existing sewer and water lines indicating size, and the location and size of such lines to be extended into the proposed project together with the location of underground telephone, power, gas and cable utilities;

      7.   Location of existing and proposed fire hydrants in the immediate vicinity of the project or within the project;

      8.   Location and widths of rights-of-way of the adjacent roads together with the location of any proposed road or other right- of-way;

      9.   Location and dimensions of easements, private and public, within and adjacent to the proposed project together with the purpose thereof;

      10.   All existing vegetation over two inches (2") in caliper, including size and species;

      11.   Proposed landscaping of the project including types and size of trees, shrubs, ground cover and other vegetation;

      12.   Location and height of walls or fences; chain link fencing is not allowed on the street side(s) of the site. Brick, wrought iron, vinyl, or additional types of material may be approved, but will be reviewed on a case by case basis. Fencing to be decorative but functional for the site.

      13.   Location of parking areas;

      14.   Location of vehicular and pedestrian circulation patterns, easements and proposed improvements;

      15.   Irrigation system for landscaping; and

      16.   Pictures of street view(s), a minimum of both ways from site.

   D.   Architectural Plan: An architectural plan of the proposed construction in sufficient detail to show the following:

      1.   All actual exterior elevations;

      2.   Location and type of exterior lighting. Only LED, downward facing, shielded lighting is allowed. [Cut sheet of lighting is required]; and

      3.   Address numbers to be of contrasting color to building and shall be illuminated.

   E.   Sample Board: A board with mounted samples of the actual building materials in the actual colors proposed. (Ord. 600, 12-20-2017; amd. Ord. 609, 7-3-2018; Ord. 639, 9-2-2020)