Ordinance Text
5-4-5: CONSTRUCTION DRAWINGS:
A. Application:
1. An applicant shall file with the City: a copy of a complete construction drawing application, fees, and two (2) paper copies of the construction drawings with data as required in this section. After the City approves the construction drawings, the applicant shall provide three (3) full-size paper copies of the approved construction drawings to the City. The applicant may proceed with the construction of infrastructure.
2. As a condition precedent to the approval of any final plat, the subdivider shall construct City required improvements according to the "Idaho Standards for Public Works Construction" and the Middleton supplement to the "Idaho Standards for Public Works Construction" in effect at the time the final plat application is accepted by the City. (Ord. 609, 7-3-2018)
3. Plans for the improvements herein required shall be prepared by an engineer registered in the State of Idaho and shall be approved by the City prior to filing an application for final plat. (Ord. 588, 3-1-2017; amd. Ord. 609, 7-3-2018)
4. The City may accept an irrevocable letter of credit, cashier's check or other guarantee in the amount of one hundred fifty percent (150%) of the estimated costs to ensure completion of only landscaping and irrigation system improvements in the event that inclement weather precludes the successful installation of landscaping and irrigation.
B. Method And Medium Of Presentation:
1. All drawings to be offered for Council consideration, and recording, shall be prepared according to Idaho Code title 50, chapter 13, and this Code.
2. Copies of the record drawing shall be reproduced in the form of black line prints on a white background.
3. The drawing shall be drawn to an accurate scale having not more than one hundred feet to an inch (1" = 100') unless otherwise approved as to scale.
C. Content Of Construction Drawing:
1. A title which includes the name of the subdivision and its location by number of section, township, range and county.
2. Name, address and official seal of the registered professional land surveyor preparing the drawing.
3. Scale, north arrow and date of the plat preparation.
D. Survey Data Required:
1. Boundaries of the lot to be subdivided fully balanced and closed, showing all bearings and distances, determined by an accurate survey in the field. All dimensions shall be expressed in feet and decimals thereof.
2. Any excepted parcel(s) within the drawing boundaries shall show all bearings and distances, determined by an accurate survey in the field. All dimensions shall be expressed in feet and decimals. Out parcels are not allowed.
3. Show basis of bearing on the drawing with a minimum of two (2) government corners with all corner perpetuation and filing information.
E. Descriptive Data Required:
1. Name, rights-of-way lines, courses, lengths and widths of all public roads, and bicycle/pedestrian pathways, and utility and utility access easements; all linear curves for road centerlines and property lines shall include the following information:
a. Radii.
b. Central angle.
c. Arc length.
d. Long chord, length and bearing.
e. Spiral curves should have essentially the same information except for radii and tangent length.
2. All easements of record shall be shown and reference the instrument number.
3. Each lot and block shall be numbered consecutively and individually throughout the drawing.
4. Location, dimensions, bearings, radii, arcs and central angles of all sites to be dedicated to the public will be clearly indicated and the intended use specified.
5. A note indicating that no structures shall be constructed or installed in an easement and that any fences, landscaping or any other structures constructed or installed in an easement may be removed by the City and utility companies, and replaced at the landowner's expense. (Ord. 609, 7-3-2018)
Source: American Legal Publishing — codelibrary.amlegal.com — public domain
Official Source ↗
Root-LD Entity Data
◈ Machine-Readable Provenance Record
boisestandard.org · municipal corpus
Federation ID
bs-aml-mid-efc997d1e4060a1f
Doc ID
0-0-0-1901
Domain Signature
boisestandard.org
Jurisdiction
Middleton, Idaho — United States
City
Middleton
County
Canyon County
Publisher
American Legal Publishing
Source Verified
✓ TRUE
Navigate — Middleton City Code of Middleton
Nearby Sections
CHAPTER 4 STANDARDS5-4-1: LAND USE, SETBACK AND AREA TABLES:5-4-2: ACCESSORY STRUCTURES:5-4-3: TRAFFIC IMPACT ANALYSIS:5-4-4: PRELIMINARY PLAT:5-4-5: CONSTRUCTION DRAWINGS:5-4-6: AS-BUILT CONSTRUCTION DRAWINGS:5-4-7: FINAL PLAT:5-4-8: COMBINING PRELIMINARY AND FINAL PLATS:5-4-9: ADMINISTRATIVE LOT SPLITS AND BOUNDARY5-4-10: DESIGN AND DEVELOPMENT STANDARDS:5-4-10-1: GENERAL:5-4-10-2: ROADS:5-4-10-3: BLOCK REQUIREMENTS:5-4-10-4: LOT REQUIREMENTS:
Middleton Municipal Code — public domain
← Middleton Code Index