Lighting Equipment On Motor-Driven Cycles

TITLE 49 MOTOR VEHICLES CHAPTER 9 VEHICLE EQUIPMENT 49-925. Lighting equipment on motor-driven cycles. The head lamp upon every motor-driven cycle may be of the single-beam or multiple-beam type, but in either event shall comply with the requirements and limitations as follows: (1)  Every head lamp on a motor-driven cycle shall be of sufficient intensity to reveal a person or a vehicle at a distance of not less than one hundred (100) feet when the motor-driven cycle is operated at any speed less than twenty-five (25) miles per hour and at a distance of not less than two hundred (200) feet when the motor-driven cycle is operated at a speed of twenty-five (25) or more miles per hour, and at a distance of three hundred (300) feet when the motor-driven cycle is operated at a speed of thirty-five (35) miles or more per hour. (2)  In the event a motor-driven cycle is equipped with multiple-beam head lamps, the beams shall meet the minimum requirements set forth above and shall not exceed the limitations set forth in section 49-922 , Idaho Code. (3)  In the event a motor-driven cycle is equipped with a single-beam lamp, the lamp shall be so aimed that when the vehicle is loaded, none of the high-intensity portion of light, at a distance of twenty-five (25) feet ahead, shall project higher than the level of the center of the lamp from which it comes.